• 전기의세계
• /
• 제17권3호
• /
• pp.7-28
• /
• 1968

When a insulator plate is inserted to the discharge path of a space discharge gap in which the field strength is not uniform, the spark voltage under the atmospheric pressure between the electrodes decreases or rises according to the position of the insulating plate. Also it is reported that if a metallic barrier plate is inserted to the discharge path of the same space discharge gap, similar variations of spark voltage are found. Speaking briefly, mensioned above are the spark voltage characteristics when an insulator or metallic barrier is inserted to the space discharge gap. Also some experimental results, concerning to the surface creepage flash over characteristics at the case when an insulator barrier is inserted to the discharge path of a surface creepage discharge gap, were reported by Peek. But up to now there are no reports on surface flash over voltage characteristics at the case when a metallic barrier is inserted to the surface creepage gap. In this study the effects of a conducting metallic barrier inserted to the path of a surface creepage discharge gap on the flash over voltage characteristics are investigated theoretically and experimentally, and got some important results, clearing the effects of the position and width of a conducting barrier is inserted, the surface flash over voltage characteristics appear as an Inverse N or W Characteristics. Such theoretical or experimental results may have some relation not only with the effects of dry belt and snow on suspension insulators, but also with the effects of dirty zone or water drops on the surface creepage flash over voltage.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.77-77
• /
• 2015

Metallic glass alloys having dense packing structure have short range ordered structure with long range homogeneity. Therefore, they can provide complete corrosion protection and unique electrical properties. Recently, metallic glass thin films have received much attention to extend its application fields combining with PVC coating technologies. The metallic glass thin films can change the surface properties of the conventional bulk materials which need anticorrosion properties. However, multi-component alloying targets are required to fabricate the metallic glass thin films because metallic glass alloys contain more than three elements. Recently, many researchers have been reported the properties of the metallic glass thin films synthesized with multi-cathode systems or amorphous target. But, it is difficult to fabricate the large sized sputtering targets for mass production equipment with high toughness and thermal stability. In this study, newly developed sputtering target with glass forming ability and the properties of the metallic glass thin films will be introduced with respect to the various application fields such as bipolar plate in PEM fuel cell and decorative coatings for electric device and construction fields.

• 전기의세계
• /
• 제19권2호
• /
• pp.1-5
• /
• 1970

According to the previous studies which was done by the author, the flashover voltage was found to be increased considerably if some metallic barriere are inserted into the flashover discharge path. This paper shows that the flashover voltage in suspension insulators and bushings is raised up by the application of metallic barrier effect on surface discharge. Using moderate metallic barrier configulation the flash over voltage can be raised up by the amount of about 15% compared to that of the convensional type of suspension insulatiors and bushings.

• Carbon letters
• /
• 제4권2호
• /
• pp.74-78
• /
• 2003

Four kinds of plasma blacks were prepared by plasma pyrolysis under various metallic catalysts coated on honeycomb, and investigated the catalytic effect on the characteristics of the plasma blacks prepared under plasma pyrolysis condition. Pt, Pt-Rh, and Pd catalysts were employed as active materials to prepare the plasma blacks. In the experimental range studied, the metallic catalysts influenced on surface area, particle size, surface oxygen content and electrical conductivity of the plasma blacks prepared. It was showed that more dense particle of plasma blacks were prepared under existence of metallic catalysts. Presence of the metallic catalyst reduces the electrical resistivity of plasma blacks due to the decrease in the amount of oxygen functional groups. The highest electrical conductivity of plasma black was observed in the Pt catalyst and then followed by those Pt-Rh, Pd and bare cordierite honeycomb.

• 한국수산과학회지
• /
• 제43권2호
• /
• pp.146-158
• /
• 2010

In order to evaluate the characteristics of sediments and pollution by organic matter and metallic elements in intertidal sediments along the southwestern coast of Korea, we measured various geochemical parameters, including the mean grain size (Mz), water content (WC), ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and metallic elements (Al, Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, As), in intertidal surface sediments. The Mz of the surface sediments ranged from 2.1 to 8.3$\phi$, indicating that the surface sediments consist of various sedimentary facies, such as sand, slightly gravelly mud, sandy mud, and silt. The IL and COD in surface sediment ranged from 0.8 to 5.5% (mean $2.9\pm1.2%$) and from 3.9 to $13.8\;mgO_2/g{\cdot}dry$ (mean $8.5\pm2.6\;mgO_2/g{\cdot}dry$), respectively, which were lower than the values for surface sediment in areas near fish and shellfish farms or industrial complexes. No AVS was detected at any sampling station, despite various sedimentary facies. Most of metallic elements in surface sediments showed relatively good positive correlations with Mz and IL, which imply that the concentrations of metallic elements are mainly controlled by grain size and the organic matter content. The concentrations of metallic elements, except As, at some stations were considerably lower than those in the Sediment Quality Guideline (Effect Range Low, ERL) proposed by the National Oceanic and Atmospheric Administration (NOAA) in the United States. Similarly, the geoaccumulation index (Igeo) class indicated that pollution by metallic elements in intertidal surface sediment, except As, was moderate or non-existent. Our results imply that the intertidal surface sediments along the southwestern coast of Korea are not polluted by organic matter and metallic elements and are healthy for benthic organisms.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.687-689
• /
• 1995

Our team works on mixture of hard magnetic materials. As hard magnetic material we used mixture of powders: melt-spun ribbon Nd-Fe-B, ferrite and Alnico. Their different mixtures are basic material for dielectromagnets under our investigation. Main disadvantage of dielectromagnets with Nd-Fe-B alloy powder as a component is a low corrosion resistance. Protection against corrosion is covering dielectromagnets with metallic or organic coating film. The coating film protects dielectromagnets from free particles on the surface and low resistance for mechanical stresses too. The surface of dielectromagnets prepared from mixture of powders if formed by metallic particles - powder of Nd-Fe-B and Alnico, particles of oxide - powder of ferrite and particles of resin - bonding materials. Team work on technology of laying the metallic coating on dielectromagnets prepared from mixture of mentioned powders. Papers show the results of initial investigation on metallic coating technology. It shows influence of type and used technology of the metallic coating film on magnetic properties of dielectromagnets.

• 한국수산과학회지
• /
• 제39권2호
• /
• pp.106-117
• /
• 2006

We measured the concentrations of organic matter and metallic elements (Al, Fe, Cr, Mn, Ni, Cu, Zn, As, Cd, Pb and Hg) in the surface sediments of Masan Harbor (in the southern sea, Korea) to evaluate the geochemical characters of sediment and the pollutions by organic matter and metallic elements. The mean grain size of the surface sediments in the study area ranged from $5.6{\phi}$ to $7.8{\phi}$, indicating silt sediment. The water content of the surface sediments exceeded 60% except at some stations. The contents of ignition loss (IL), total organic carbon (TOC) and total nitrogen (TN) ranged from 7.2-14.3%, 1.2-3.2%, and 0.10-0.28%, respectively. Based on the C/N ratios, the organic matter in the surface sediments of Masan Harbor may originate from terrigenous sources including fluvial inputs (mainly sewage in urban areas). The chemical oxygen demand (COD) and acid volatile sulfide (AVS) ranged from $11.3-29.9\;mgO_2/g\;dry$ and 0.20-4.47 mgS/g dry, respectively, and low concentrations were observed near a shipping route. In addition, the concentrations of metallic elements showed large spatial variations in Masan Harbor and the distributions of metallic elements were also comparable to those of organic matter. This implies that the distributions of organic matter and metallic elements in the surface sediments of Masan Harbor are mainly controlled by biogenic matter and artificial action (mainly dredging). In addition, we calculated the enrichment facto. (EF) and geoaccumulation index (Igeo) in order to evaluate pollution by metallic elements. The enrichment of metallic elements relative to Al was three to eighteen times higher at the study sites, compared to levels in the Earth's crust except for Fe, Ni and Mn. In addition, the Igeo class indicated that the surface sediments in the study area were moderately to strongly polluted in terms of metallic elements.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.85-85
• /
• 2017

ISO (International Organization for Standardization) is an independent, non-governmental international organization with a membership of 163 national standards bodies (NSB). The ISO standards are developed and processed within the technical committees (TC) or their subcommittees (SC) dealing with the different subject matters. The first technical committee, ISO/TC1, deals with screw threads and was created back in 1947. While, more recently, TC 309 was created to standardize organizational governance. The ISO technical committee in the field of metallic coatings was created in 1962 with the title ISO/TC107- Metallic and other inorganic coatings. This ISO/TC107 technical committee is dealing with the standardization of the characteristics of protective and decorative metallic coatings applied by electrolysis, fusion, vacuum or chemical means, mechanical deposition and ion plating. similarly, it also covers the standardization of the characteristics of protective and decorative non-metallic coatings (excluding paints and other organic coatings) on metal surface applied by electrolysis, fusion, vacuum or chemical means. Scope is further extended to the Standardization of the preparation of the substrates prior to the deposition of metallic and inorganic coatings. There are a total of 144 existing ISO standards published by this technical committee and has 19 participating countries (P-members) and 24 observing countries (O-members). Korean Agency for Technology and Standards (KATS), being the secretariat of ISO/TC107, is constantly supporting this technical committee for the development of standards and related activities.

• 한국게임학회 논문지
• /
• 제10권6호
• /
• pp.169-178
• /
• 2010

본 논문은 실시간 응용 프로그램에서 사실적인 금속 재질을 렌더링하기 위한 효과적인 기법을 제안한다. 제안된 기법은 금속면의 미세한 흡집을 표현하기 위해 법선 벡터를 섭동(perturbation)하는 방법을 사용한다. 법선 벡터를 섭동하는 일반적인 방법은 범프(bump) 매핑이나 법선(normal) 매핑 등의 방법을 사용하는 것이다. 그러나 이러한 방식은 이방성 반사 특성을 갖는 표면에서는 사실적인 빛의 산란을 보이지 못한다. 금속 특유의 반사를 표현하기 위해서는 미세면 분포 함수를 이용하여 이방성 반사 특성을 모델링하는 것이 일반적이므로 일반적 법선 섭동만으로는 만족스런 결과를 얻지 못한다. 본 논문은 법선 벡터의 섭동과 함께 미세면 분포 함수를 변형하는 기법을 통해 매우 사실적인 금속면 재질 렌더링이 가능한 기법을 제안한 다. 제안된 기법은 쉽게 GPU 프로그램으로 구현되며, 실시간 환경에서 동작한다.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.375-379
• /
• 2013

The electronic and the magnetic properties of (001) surface of $KCaN_2$ half-metallic compound with full-Heusler structure are studied with the use of a full-potential linearized augmented plane wave method. Two possible terminations of the surface are considered and only the one with N atoms in the topmost layer is found to retain the half-metallic properties of the bulk. The magnetic properties of N-terminated surface are enhanced compared with the properties of the bulk. The calculated magnetic moments on the N atoms in the $KCaN_2$ are 1.26 ${\mu}_B$ in the bulk and 1.90 ${\mu}_B$ at the surface. The subsurface metal atoms are also slightly polarized. In the surface terminated with metal atoms, not only the half-metallicity is destroyed, but also the magnetic properties of the system are weakened.