• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.368.1-368.1
• /
• 2014

We proposed amorphous GeSe-based ReRAM device of metal-insulator-metal (M-I-M) structure. The operation characteristics of memory device occured unipolar switching characteristics. By introducing the concepts of valance-alternation-pairs (VAPs) and chalcogen vacancies, the unipolar resistive switching operation had been explained. In addition, the current transport behavior were analyzed with space charge effect of VAPs, Schottky emission in metal/GeSe interface and P-F emission by GeSe bulk trap in mind. The GeSe ReRAM device of M-I-M structure indicated the stable memory switching characteristics. Furthermore, excellent stability, endurance and retention characteristics were also verified.

• Applied Microscopy
• /
• 제48권2호
• /
• pp.43-48
• /
• 2018

Transition metal dichalcogenide (TMD) materials have distinctive structures in comparison with other two-dimensional materials. TMD materials' structure is held together by van der Waals and covalent intralayer interactions; consequently, TMDs exhibit multiple phases and properties depending on their structure. This article reviews some of the research currently being undertaken to control TMD phases to utilize their different properties. This review introduces some trials for changing the phase of TMDs.

• Bulletin of the Korean Chemical Society
• /
• 제12권5호
• /
• pp.515-517
• /
• 1991

The electronic behavior of a organic metal $(BEDT-TTE)_2$${Cu_5}{I_6}$ observed to be stable at low temperatures was examined by performing tight-binding band electronic structure calculations. The suppression of a metal-insulator tansition is likely to originate from its quasi-two-dimensional Fermi surface with no nesting, in agreement with experiment.

• Advanced Composite Materials
• /
• 제17권2호
• /
• pp.101-110
• /
• 2008

Metal nanohoneycomb structures were fabricated by E-beam evaporation and a two-step anodization process in phosphoric acid. Their tribological properties of adhesion and friction were investigated by AFM in relation to the pore size of the nanohoneycomb structures. Variations of the adhesive force are not found with pore size, but formation of the pore greatly reduces the adhesive force compared to the absence of pore structure. The coefficient of friction increased nonlinearly with pore size, due to surface undulation around the pore. Tribological properties do not differ greatly between the original nanohoneycomb structure and the metal nanohoneycomb structure.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2800-2802
• /
• 2013

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4329-4335
• /
• 2014

본 연구의 목적은 금속 도재관과 지르코니아 도재관 보철물의 하부 구조물인 금속과 상부 도재의 결합강도 (금속군), 하부 구조물인 지르코니아와 상부 도재의 전단결합강도 (지르코니아군)를 결정함에 있어서 각각 하부 구조물인 금속과 지르코니아의 표면 처리를 다르게 하였을 때, 전단결합강도에 미치는 영향을 평가하고자 한다. 금속군에서는 금속 표면에 각각 아무 처리를 하지 않은 집단(NM), 모래분사를 실시한 집단(SM), 불투명 도재를 도포한 집단(OM), 모래분사와 함께 불투명 도재를 도포한 집단(SOM) 총 4집단으로 나누어 실시하였고, 지르코니아군에서는 아무 처리를 하지 않은 집단(NZ), 표면에 모래 분사를 실시한 집단(SZ), 지르코니아 표면에 이장재(지르라이너)를 처리한 집단(LZ), 모래분사와 이장재 처리를 함께한 집단(SLZ) 총 4집단으로 시편을 제작하였다. 금속군과 지르코니아군 각각의 4집단의 표면 처리에 따른 전단결합강도에 영향이 있는지 알아보기 위하여 SPSS를 사용하여 일원배치 분산분석을 시행하였다. 금속 도재관의 경우 하부 구조물인 금속 표면에 모래분사를 한 후 불투명 도재를 도포하는 것이 가장 권장되며, 지르코니아 도재관의 경우 하부 구조물인 지르코니아 표면에 모래분사를 한 후 지르라이너를 도포하는 것이 권장된다.

• Journal of Applied Biological Chemistry
• /
• 제58권1호
• /
• pp.65-74
• /
• 2015

X선 흡수분광법(X-ray absorption spectroscopy, XAS)을 이용하는 X선 흡수미세구조(X-ray absorption fine structure, XAFS)의 분석은 다양한 학문분야에서 적용되고 있다. 본 연구에서는 XAFS 분석을 위한 토양 시료의 준비에서부터 XAFS 측정 후 X선 흡수 끝머리 부근 미세구조(X-ray absorption near edge structure, XANES) 및 광범위 X선 흡수 미세구조(extended Xray absorption fine structure, EXAFS) 데이터를 추출하여 연구에 활용하는 것에 대해 간략하게 소개하였다. 특히 토양환경 분야에서 XANES 및 EXAFS 분석을 활용한 선행연구들에 대해 비소(As) 및 중금속 주요 원소(Cd, Cu, Ni, Pb, Zn)별로 그 내용을 정리하였다. 토양환경 분야에서 XAFS의 응용은 납(Pb)의 화학종 규명에 관한 연구가 가장 많은 것으로 나타났다. 이와 함께 대부분의 연구들은 오염토양 내 중금속 화학종의 규명을 통해 중금속의 유입 원인 등에 대해 기술하고 있으며, 이를 정화하기 위한 다양한 방법들(개량제 처리, 식물정화)을 적용한 후, 안정화된 중금속 화학종을 XANES 및 EXAFS 분석을 통해 규명하여 정화 방법들의 효율성과 안정성에 대해 보고하였다.

• 열처리공학회지
• /
• 제14권4호
• /
• pp.212-219
• /
• 2001

The fatigue test was carried out to evaluate the fatigue characteristics of fire resistance steel for frame structure and heat affected zone (HAZ) by the one side Gas Metal Arc Welding (GMAW). In this paper, the fatigue crack growth behavior was investigated with the compact tension specimen of base metal and the HAZ according to chemical composition and rolling end temperature, respectively. And the acoustic emission signals obtained from the fatigue test were analyzed by the time-frequency analysis method as a nondestructive evaluation. Main results obtained are summarized as follows; The hardness was appeared softening phenomenon that weld metal and HAZ are lower than that of base metal. Fatigue life of welded specimen was longer than that of base metal. m was 3~4.5 in base metal and 3.8~5.8 in HAZ. The main frequency range of acoustic emission signal analyzed from time-frequency method is different with the range by noise and crack. Also, it could be classified that it was also generated by fracture mechanics of dimple, inclusion etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.131-133
• /
• 2001

Dendrimers represent a new class of synthetic macromolecules characterized by a regularly branched treelike structure. Peculiar features of the dendritic geometry are the large number of end groups as well as the shape persistence in higher generations, approaching spherical geometry. And one of the most peculiar characteristics of dendritic macromolecules is their controlled molecular structure and orientation, which means that they have a practical application in achieving a highly organized molecular arrangement. We attempted to fabricate a G4-48PyA dendrimer LB films containing 48 pyridinealdoxime functional end group that could form a complex structure with metal ions. Also, we investigated the surface activity of dendrimer films at air-water interface. And we have studied the electrical properties of the ultra-thin dendrimer LB films. The electrical properties of the ultra-thin dendrimer LB films were investigated by studying the current-voltage characteristics of metal/dendrimer LB films/metal (MIM) structure. And rectifying behavior of the devices was occurred in applied field.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.180-186
• /
• 2002

The simulated die-casting process in which the traditional plaster casting process is combined with Rapid Prototyping technology is being used to produce Al, Mg, and Zn die-casting prototypes. Unlike in the die-casting process, molten metal in the conventional plaster casting process is fed via a gravity pour into a mold and the mold does not cool as quickly as a die-casting mold. The plaster castings have much larger and grosser grain structure as compared as the die-castings and the thin walls of the plaster mold cavity may not be completely fillet Because of lower mechanical properties induced by the large grain structure and incomplete Idling, the conventional plaster casting process is not suitable for the trial die-casting Process. In this work, an enhanced trial die-casting process has been developed in which molten metal in the plaster mold cavity is vibrated and pressurized simultaneously. Patterns for the casting are made by Rapid Prototyping technologies and then plaster molds, which have runner system, are made using these patterns. Imparted pressurized vibration to molten metal has made grain structure of castings much finer and improved fluidity of the molten metal enough to obtain complete filling at thin walls which can not be filled in the conventional plaster casting process.