• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.259-260
• /
• 2005

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2005.04a
• /
• pp.12-12
• /
• 2005

• Journal of Environmental Science International
• /
• v.20 no.4
• /
• pp.483-491
• /
• 2011

Harvesting of marshfire glasswort (Salicornia europaea) by local people has been increased recently since this plant was known for a well-being food. Even though some harvesting sites are facing high risk of environmental pollution, Salicornia europaea is still harvested on a large scale. Therefore, to investigate safety of Salicornia europaea as a food resource, salt marsh environment, potential harvestable biomass, element and heavy metal accumulations in Salicornia europaea has been studied in three salt marshes, west-coast of Korea. Salicornia europaea showed 150 - 230$g/m^2/yr$ harvestable biomass. Biomass and nitrogen contents of Salicornia europaea were closely related to soil nitrogen and carbon concentrations. Average Na, Zn, Fe, Cr accumulations in Salicornia europaea were 41479, 18, 297, 1.5 (mg/kg), indicating valuable trace element contents. However, average heavy metal accumulations such as As, Cd, Cu, Pb, Hg accumulations were 1.5, 7.1, 4.2, 1.5, 0.1 (mg/kg), which were even or higher than national standards (0.5, 0.5, 2, 2, 0.1) of salts. These results imply that harvesting and eating of Salicornia europaea in west-coast research sites would be harmful because the contents would be much higher if it is calculated as only considering salts and minerals. Therefore, harvesting of Salicornia europaea from some salt marsh in west-coast of Korea should be done cautiously.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2019.10a
• /
• pp.134-134
• /
• 2019

Utilization of organic waste as a renewable energy source is promising for sustainability and mitigation of climate change. Pyrolysis converts organic waste to gas, oil, and biochar by incomplete biomass combustion. Biochar is widely used as a soil conditioner and adsorbent. Biochar adsorbs/desorbs metals and ions depending on the soil environment and condition to act as a nutrient buffer in soils. Biochar is also regarded as a carbon storage by fixation of organic carbon. Phosphorus (P) and nitrogen (N) are strictly controlled in many wastewater treatment plants because it causes eutrophication in water bodies. P and N is removed by biological and chemical methods in wastewater treatment plants and transferred to sludge for disposal. On the other hand, P is an irreplaceable essential element for all living organisms and its resource (phosphate rock) is estimated about 100 years of economical mining. Therefore, P and N recovery from waste and wastewater is a critical issue for sustainable human society. For the purpose, intensive researches have been carried out to remove and recover P and N from waste and wastewater. Previous studies have shown that biochars can adsorb and desorbed phosphates implying that biochars could be a complementary fertilizer. However, most of the conventional biochar have limited capacity to adsorb phosphates and nitrate. Recent studies have focused on biochar impregnated with metal salts to improve phosphates and nitrate adsorption by synthesizing biochars with novel structures and surface properties. Metal salts and metal oxides have been used for the surface modification of biochars. If P removal is the only concern, P adsorption kinetics and capacity are the only important factors. If both of P and N removal and the application of recovery are concerned, however, P and N desorption characteristics and bioavailability are also critical factors to be considered. Most of the researches on impregnated biochars have focused on P removal efficiency and kinetics. In this study, coffee waste is thermally treated to produce biochar and it was impregnated with Mg/Al to enhance phosphates and nitrate adsorption/desorption and P bioavailability to increase its value as a fertilizer. Kinetics of phosphates and nitrate adsorption/desorption and bioavailability analysis were carried out to estimate its potential as a P and N removal adsorbent in wasewater and a fertilizer in soil.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.872-879
• /
• 1997

The nonuniform thermal conductive reaction blocks were manufactured by impregnation of metal salts on the expanded graphite to improve the heat and mass transfer ability of reaction block for the chemical heat pump using the reaction of ammonia and metal salts(halide). The nonuniform blocks were designated to increase apparent density, like 165, 222, 279, 337, $394kg/m^3$ radially The experimental results showed that the heat transfer characteristics of nonuniform blocks were better than uniform blocks. As the reaction of ammonia repeated, the volumetric expansion in the reaction block makes the mass transfer improve, and the reproducibility better.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.4
• /
• pp.487-498
• /
• 2006

The oxidation processes of metal catalysis were practically applied into the flexographic inks wastewater treatment to derive the most effective and economical system among all the processes of iron-salts coagulation, iron-catalyzed air oxidation, and coagulation followed by biological treatment. The iron concentration and pH were optimized as $2.8{\times}10^{-3}mol$ and 5.5~6.0, respectively, for all the oxidation processes. At the optimal reaction conditions, the removal efficiencies of $TCOD_{Mn}$ and Color were as follows for the respective process: i) 75% $TCOD_{Mn}$ and 77% Color removals for iron-salts coagulation, ii) 91% TCODMn and 90% Color removals for iron-catalyzed air oxidation, iii) 74~92% $TCOD_{Mn}$ and 81~90% Color removals for coagulation followed by biological treatment. Based on the economical and technological aspects, iron-catalyzed air oxidation was confirmed as the most effective process in the treatment of industrial wastewater.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.630-635
• /
• 2007

New chiral Co-salen complexes with one $C_3-^tBu$ group in the structure have been synthesized and applied as a chiral catalyst. A dimeric chiral salen having aluminum group metal salts such as $AlCl_3$ displayed very high catalytic reactivity and enantioselectivity for the asymmetric ring opening of epoxides to synthesize optically pure ${\alpha}$-aryloxy alcohols via phenolic kinetic resolution. The salen complexes immobilized on the inorganic support were also used as effective catalysts in that reaction. The identity of metal salts in the new chiral salen complex has proved to be important in the enantioselective reactions.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.359-363
• /
• 2004

Reaction conditions and catalysts were investigated for direct $CF_3I$ synthesis. Optimum reaction temperature was determined by pyrolysis of $CF_3H$ and catalytic reactions. Reactions with changing oxygen concentration were performed. As a result, yield of $CF_3I$ increased with decreasing oxygen concentration. Catalytic activity was changed with the weight ratio of the used metal salts. This result was stemmed from the change in the pore size of activated carbon by the metal salts. The optimum reaction conditions were: $600^{\circ}C$, space velocity of $45hr^{-1}$, and with 7wt% KF/AC catalyst.

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.607-612
• /
• 2007

Zn-AC and Zn-H-AC series prepared from non- and surface-modified activated carbon were investigated in terms of their hydrogen production capacity. An increase in the concentration of the zinc salts used with these series was shown to lead to a decrease in the values of the surface textural properties. The existence of zinc complexes on the surface was confirmed from an analysis of XRD data. The SEM micrographs of the two different sample types showed that the transformation of the carbon surface with an acid pre-treatment significantly change the metal contents on the surfaces of the carbon matrix. The EDX spectra indicated that all of the samples were richer in the amount of oxygen and zinc compared to any other elements. The results obtained using the Boehm's titration method showed that the positive introduction of the acidic groups on the carbon surfaces with the acid treatment is correlated with an increase in the amounts of zinc complexes with variation of the acidic groups. In terms of the hydrogen production performance, the volume fractions of the Zn-H-AC series were found to produce higher amounts than the Zn-AC series as a function of the metal contents considering the effects of the acid treatment.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.247-252
• /
• 2012

The objective of this study was to find an appropriate method and process for protecting the green color in bamboo leaves and subsequent extraction of the green colorants, chlorophyll. Various inorganic salts including cupric sulfate, ferric sulfate, and zinc chloride were employed as green color protectors. Accordingly, the effects of metal salts and treatment conditions on color protection were investigated to find appropriate protector and conditions. And also, the efficacy of bamboo colorants as a natural green dye was evaluated through dyeing and colorfastness tests. Antimicrobial activity of dyed fabrics was measured by shake flask method in terms of bacterial reduction rate using Staphylococcus aureus(ATCC 6538). On the basis of experimental results for stabilizing bamboo leaves colorants, it was confirmed that Cu was the most appropriate metal type considering dye uptake, photostability and light fastness, and its optimum concentration was 0.025%. After the stabilization, the colorants were extracted efficiently at NaOH aqueous solution of 1.00%. It was concluded that bamboo leave has a high potentiality as new resources to produce a natural green dye with antimicrobial functionality.