• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.8-14
• /
• 2015

In this study, the model biomass was used for hydrogen production by supercritical water gasification (SCWG). Model biomasses were glycerol, glycine, lignin and cellulose. The feed concentration was set to 1 wt%. Experiments were conducted in a reactor at $440^{\circ}C$ and above 26.3 MPa for 30 min. The effects of catalysts such as alkali metal salt ($K_2CO_3$ and $Na_2CO_3$) and transition metal salts ($Ni(NO_3)_2$, $Fe(NO_3)_3$ and $Mn(NO_3)_2$) on the gasification were systematically investigated. No tar or coke was observed in all experiments. The results showed that the gasification efficiency increased with various catalysts. For the cellulose and glycerol, all catalysts were effective for the promoted $H_2$ production compared with no catalyst. The significant decrease of $H_2$ production compared with no catalyst was observed with $Na_2CO_3$ and $Fe(NO_3)_3$ for glycine and lignin. respectively. The highest H2 production, 1.24 mmol was obtained for glycerol-SCWG with $Mn(NO_3)_2$. Conclusively, the addition of $Mn(NO_3)_2$ enhanced all model biomass gasification efficiency and increased the hydrogen production promoting the supercritical water reaction.

• 폴리머
• /
• 제24권6호
• /
• pp.802-809
• /
• 2000

Poly(L-glutamic acid) (PLGA)와 PVA 블렌드막을 제조한 후, ethanol 수용액중에서 막증의 polypeptide 사슬의 2차구조 전이거동에 미치는 용매조성 및 대이온종의 영향과 알칼리 금속 이온 (Li, na, K, Cs)에 대한 투과특성을 조사하였다. 막중 PLG 알칼리 금속염의 helix 형성거동에 있어 대이온 선택성은 Li>Na>K>Cs의 순으로 관찰되었고, 이와 같은 특이성은 탈용매화 에너지와 정전에너지의 감소에 따른 고분자 하전기와 대이온과의 contact ion-pair 형성에 의한 것으로 설명하였다. 또한 PLGA/PVA 블렌드막의 ethanol 수용액 중에서의 알칼리 금속이온의 투과거동을 살펴보면, ethanol 농도가 점차 증가함에 따라 K, Cs의 경우는 투고도가 증가한, Li, Na의 경우에는 감소하였다. K, Cs 이온의 경우 대이온과 염소이온간의 ion-pair (M$^{+}{\cdot}$Cl$^{-}$)형성에 의한 Donnan배제효과의 감소와 중성염 형태로의 분배량 증가때문인 것으로, Li, Na 이온의 경우 막중의 coil-helix 구조전이에 따른 자유체적의 감소와 고분자 하전기와의 상호작용이 증가하여 확산성이 크게 감소하였기 때문인 것으로 생각된다.

• Preventive Nutrition and Food Science
• /
• 제21권2호
• /
• pp.110-116
• /
• 2016

This study was performed to evaluate and compare the antioxidant substance content and antioxidant activities of white (Superior) and colored (Hongyoung, Jayoung, Jasim, Seohong, and Jaseo) potatoes. The potatoes were extracted with 80% ethanol and were evaluated for the total polyphenol, flavonoid, and anthocyanin contents and for 1,1-diphenyl-2-picrylhydrazyl (DPPH)/2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging activity, reducing power, and ferrous metal ion chelating effect. The total polyphenol, flavonoid, and anthocyanin contents of Hongyoung and Jayoung were higher than white and other colored potatoes. All colored potato extracts, except for Jaseo and Seohong, showed higher ABTS radical scavenging activities than the general white potato extract. Hongyoung and Jayoung had the highest ABTS and DPPH radical scavenging activities. Optical density values for the reducing power of Jayoung and Jaseo at concentration of 2 mg/mL were 0.148 and 0.090, respectively. All colored potato extracts had lower ferrous metal ion chelating effect than the white potato. A significant (P<0.05) positive correlation was observed between total polyphenol content and total flavonoid content (r=0.919), anthocyanin content (r=0.992), and ABTS radical scavenging activity (r=0.897). Based on these results, this research may be useful in developing the Hongyoung and Jayoung cultivars with high antioxidant activities.

• 한국환경농학회지
• /
• 제20권5호
• /
• pp.317-324
• /
• 2001

Short-term effect of phosphogypsum on soil properties including acidification, salinity and metal availability were investigated under laboratory and field conditions. Phosphogypsum and mixtures of phosphogypsum and compost were added to soil and incubated in a laboratory condition with 15% moisture content. Phosphogypsum treatments were 2.5 and 5.0 g/kg soil and in the treatments of phosphogypsum and compost mixture 10 g of compost was added additionally. After the 30 days of incubation, an additional phosphogypsum and/or compost were added to the remaining soils at the same rates of the first treatments. pH, electrical conductivity, and available hazardous elements were measured periodically during the incubation. Field experiment was conducted in a plastic film house of mellon with four treatments of phosphogypsum and compost mixtures - 25+125, 50+125, 50+250 and 100+250 kg/165 $m^2$. pH, electrical conductivity, and hazardous elements in soil and total hazardous elements in leaf were measured. In the laboratory experiment, after 30 days of the first phosphogypsum application, soil pHs were lowered by 0.7-0.8 units. After the second treatment of phosphogypsum 0.2 units of additional acidification occurred. However, acidification was not observed in the soils treated with mixtures of phosphogypsum and compost. In the laboratory experiment, phosphogypsum treatments increased electrical conductivity very significantly. In field experiment, pH and electrical conductivity of soils treated with phosphogypsum were nearly the same as those of soil not treated with phosphogypsum. Since soil condition in the field study was an open system, the free acids and salts derived from phosphogypsum could be diffused down with water leaching through the soil profile and then any significant acidification or salt accumulation in the topsoil could not be observed. In both laboratory and field experiments, levels of available hazardous elements in soils treated with phosphogypsum were quite low and not different from the levels found in the control soil. Results obtained from this study suggest that application of phosphogypsum at appropriate rates on agricultural land appears of no concern in terms of acidity, salinity and hazardous element content of soil.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.426-427
• /
• 2005

Advanced Spent Fuel Conditioning Process (ACP) is a pyrochemical process in which the spent fuel of PWR is transformed into the uranic metal ingot. Through this process, which has been developed in KAERI since 1998, the radioactivity, the radiotoxicity, the heat and the volume of the PWR spent fuel are reduced by a quarter of the original. To demonstrate a lab-scale process and extract the data for the later pilot-scale process, a demonstration facility of ACP (ACPF) is under construction and the lab-scale demonstration is slated for 2006. To establish the safeguardability of ACPF, a safeguards system including a neutron counter based on non-destructive assay, which is named as ACP Safeguards Neutron Counter (ASNC), the ACP Safeguards Surveillance System (ASSS) which consists of two neutron monitors and five IAEA cameras, and Laser Induced Breakdown System (LIBS) have been developed and are ready to be installed at ACPF. The target materials of ACP to assay with ASNC are categorized into three types among which the first is the uranic metal ingot, the second is the salt waste and the last is $UO_2$ and $U_{3}O_8$ powders, rod cuts and hulls. The Pu content of process nuclear materials can be accounted with ASNC. The ASSS is integrated in the ACP Intelligent Surveillance Software (AISS) in which the IAEA camera images and background signals at the rear doors of ACPF are displayed. The composition of special nuclear materials of ACP can be measured with LIBS which can be a supporting measurement tool for ASNC. The conceptual picture of safeguards system of ACPF is shown in Fig. 1.

• 한국재료학회지
• /
• 제28권7호
• /
• pp.423-427
• /
• 2018

For diamond/metal composites it is better to use diamond particles coated with metal carbide because of improved wettability between the diamond particles and the matrix. In this study, the coating of diamond particles with a chromium carbide layer is investigated. On heating diamond and chromium powders at $800{\sim}900^{\circ}C$ in molten salts of LiCl, KCl, $CaCl_2$, the diamond particles are coated with $Cr_7C_3$. The surfaces of the diamond powders are analyzed using X-ray diffraction and scanning electron microscopy. The average thickness of the $Cr_7C_3$ coating layers is calculated from the result of the particle size analysis. By using the molten salt method, the $Cr_7C_3$ coating layer is uniformly formed on the diamond particles at a relatively low temperature at which the graphitization of the diamond particles is avoided. Treatment temperatures are lower than those in the previously proposed methods. The coated layer is thickened with an increase in heating temperature up to $900^{\circ}C$. The coating reaction of the diamond particles with chromium carbide is much more rapid in $LiCl-KCl-CaCl_2$ molten salts than with the molten salts of $KCl-CaCl_2$.

• 대한화장품학회지
• /
• 제34권2호
• /
• pp.75-82
• /
• 2008

본 연구에서는 금 나노입자 콜로이드를 이용하여 safranin-O의 광촉매적 분해를 관찰하였다. 금 나노입자는 용액상에서 safranin-O의 분해 속도를 빠르게 하기 위해서 사용되었다. 금 나노입자 콜로이드는 수용액상에서 $Na_2CO_3$와 PVP 고분자(poly(vinyl pyrrolidone))를 이용하는 환원방법에 의하여 제조하였다. Safranin-O의 분해현상은 자외선(UV light)와 과산화수소($H_2O_2$)의 존재 하에서 금 나노입자 콜로이드와 염화금의 농도, 반응계의 산도(pH), 반응시간과 같은 실험조건들의 조절을 통해 연구되었다. 분해반응에 사용된 금 나노입자 콜로이드의 농도가 증가함에 따라서 염료가 분해되는 속도가 증가하였다. Safranin-O의 광산화 반응은 광학적으로 측정되었고, 금 나노입자의 기본적인 물성과 촉매 특성은 UV-Vis 광학계를 이용하여 측정되었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1259-1263
• /
• 2012

Two metal compounds, $[Co(phen)_2(H_2O)_2]{\cdot}2H_2SIP{\cdot}2H_2O$ 1 and $[Ni(phen)_3]{\cdot}2H_2SIP{\cdot}3H_2O$ 2, have been obtained by incorporating 1,10-phenanthroline (phen) and 5-sulfoisophthalic acid monosodium salt ($NaH_2SIP$) ligands under hydrothermal conditions. Meanwhile, the two compounds were characterized by element analysis, IR, XRD, TG-DTA and single-crystal X-ray diffraction. Both 1 and 2 present 3D supramolecular structures via O-H${\cdots}$O hydrogen bond interactions. Luminescent properties for 1 and 2 were also studied. The compound 1 has two fluorescence emission peaks centered at 398 nm attributed to the intraligand emission from the SIP ligand and at 438 nm assigned to the combined interaction of intraligand ${\pi}^*-{\pi}$ transitions of the phen ligand and ligand-to-metal-charge-transfer (LMCT) transitions (${\lambda}_{ex}$ = 233 nm). The compound 2 shows one emission band centered at 423 nm with a shoulder peak at 434 nm which may be originated from the intraligand ${\pi}^*-{\pi}$ transitions of the phen ligand (${\lambda}_{ex}$ = 266 nm).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.102-105
• /
• 2002

ADSS(All Dielectirc Self-Supporting) cable installed under high voltage power cable line suffers a variety of environmental influence, rain, wind, snow fall, chemical pollution, salt fog and electrical stress. Its lifetime is required to be at least 20 years with this harsh weathering condition. The electrical stress under high voltage power line gives rise to dry band arcing and tracking, the severest damage, on the outer sheath of cable. Finally tracking might penetrate sheath and cause the break-down of ADSS cable. Tracking resistant sheath material, therefore, should be used to protect the core of ADSS from dry band arcing and to be sure long lifetime. In this work, we discuss various commercial tracking resistant material to investigate the way of track resistance and compare their mechanical, electrical, weathering and tracking properties through serial experiments. We found track resistant material is categorized into two main type : polyethylene with metal hydroxide and polyethylene with reduced carbon black. The Liquid contaminant, Inclined plane Tracking and Erosion test says the time to track of tracking resistant material with metal hydroxide has a little longer time to track in the high applied voltage than that with carbon black, but mechanical and weathering properties were inferior to.

• 멤브레인
• /
• 제31권5호
• /
• pp.315-326
• /
• 2021

리튬 이온 배터리(LIB) 수요는 화석 연료에 대한 부담을 줄이기 위해 전 세계적으로 매년 증가하고 있다. LIB는 전기 자동차, 고정식 저장 시스템 및 기타 다양한 응용 분야에 사용된다. 리튬은 해수, 염수, 염호에서 구할 수 있으며 환경 친화적이고 저렴한 방법으로 추출하면 리튬 채굴의 부담을 크게 줄일 수 있다. 주로 나노여과(NF)와 같은 막 분리 공정은 용액에서 리튬 금속을 분리하는 효과적인 방법이다. 전기투석 및 전기 분해는 리튬 분리에 사용되는 다른 분리 공정이다. 역삼투압(RO) 공정은 이미 해수 담수화를 위한 잘 정립된 방법이다. 따라서, 리튬 금속을 목적으로 사용되는 개질된 RO 분리막은 용액속에 존재하는 다른 금속 원소의 간섭에 의한 문제를 해결할 수 있는 좋은 대안 방법이다. 적합한 NF 막을 찾거나 개발하여 리튬을 선택적으로 제거하는 것은 도전적일 수 있지만 흥미로운 연구 영역이다. 이 총설에서는 나노여과, 전기투석, 전기분해 및 기타 공정을 이용한 리튬 회수에 대해 자세히 설명한다.