• Journal of Ecology and Environment
• /
• 제29권4호
• /
• pp.389-398
• /
• 2006

To examine sediment characteristics and find anthropogenic effects on riverine wetland ecosystems, paleoecological study was carried out at Bam islands in Seoul. Three hundred cm deep sediment cores were retrieved and dated with the lamination analysis method until 36 cm depth (1986). Sediments were divided into three zones based on the depth profiles of physico-chemical variables: below 160 cm depth (before 1968), between 160 and 40cm depths and above 40cm depth (after 1986). Physico-chemical characteristics were very variable between 160 and 40cm depths and this indicates unstable sedimentation environment. Even though heavy metal concentrations were relatively low, Cd and As contents have increased continuously. Dry mass accumulation rates during $1968{\sim}1986\;and\;1987{\sim}2003$ were 140 and $21\;kg\;m^{-2}\;yr^{-1}$, respectively. This was related to flooding intensity and duration. Bulk density, water content, loss on ignition, N, C, C/N ratio were very similar to other river delta but Ca, Na and K contents were 2 to 4 times higher than others. Heavy metal contents except Pb were lower or similar to those in other studied marshes in Korea. Heavy metal and Mg contents were correlated with each other and this suggests that the source of heavy metals be parent rock. From $^{13}C$ dating dates of organic materials in sediment, it is suggested that organic matter originated from the watershed and flooding intensity in the watershed might be responsible for the source of sediments. This study provides reference data for the comparison of sediment characteristics at islands in river and for the management of Bam islands.

• Horticulture, Environment, and Biotechnology : HEB
• /
• 제59권6호
• /
• pp.775-786
• /
• 2018

To test the hypothesis that humic acid (HA), anaerobically digested pig slurry filtrate (APS), and their combination would differently affect the chemical speciation and extractability of metals (cadmium, copper, and zinc) and their uptake by plants, we conducted a pot experiment using wormwood in two texturally contrasting soils (sandy loam and clay loam) collected from a field near an abandoned Cu mine. Four treatments were laid out: HA at $ 23.5g\;kg^{-1}$ (HA), APS at $330mL\;kg^{-1}$ (APS), HA at $ 23.5g\;kg^{-1}$ and APS at $330mL\;kg^{-1}$ (HA + APS), and a control. Each treatment affected the chemical speciation and mobility of the metals, and thereby resulting in variable patterns of plant biomass yield and metal uptake. The APS supported plant growth by increasing nutrient availability. HA supported or hindered plant growth by impacting the soil's water and nutrient retention capacity and aeration, in a soil texture-dependent manner, while consistently enhancing the immobilization of heavy metals. Temporal increases in whole-plant dry matter yield and metal accumulation suggested that the plants were capable of metal hyperaccumulation. The results were discussed in terms of the mobility of metals and plant growth and corroborated by the $^{15}N$ recovery of soil- and plant-N pools under H and HS treatments. Therefore, for effective phytoremediation of polluted soils, an appropriate combination of plant growth promoters (APS) and chelating agents (HA) should be predetermined at the site where chemical stabilization of pollutants is desired.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.55-61
• /
• 2023

With femtosecond (fs) laser pulse irradiation on metals, various types of nano- and micro-scale structures can be naturally induced at the surface through laser-matter interaction. Two notable structures are laser-induced periodic surface structures (LIPSSs) and cone/spike structures, which are known to significantly modify the optical and physical properties of metal surfaces. In this work, we irradiate fs laser pulses onto various types of metals, cold-rolled steel, pickled & oiled steel, Fe-18Cr-8Ni alloy, Zn-Mg-Al alloy coated steel, and pure Cu which can be useful for precise molding and imprinting processes, and adjust the morphological profiles of LIPSSs and cone/spike structures for clear structural coloration and a larger range of surface wettability control, respectively, by changing the fluence of laser and the speed of raster scan. The periods of LIPSSs on metals used in our experiments are nearly independent of laser fluence. Accordingly, the structural coloration of the surface with LIPSSs can be optimized with the morphological profile of LIPSSs, controlled only by the speed of the raster scan once the laser fluence is determined for each metal sample. However, different from LIPSSs, we demonstrate that the morphological profiles of the cone/spike structures, including their size, shape, and density, can be manipulated with both the laser fluence and the raster scan speed to increase a change in the contact angle. By injection molding and imprinting processes, it is expected that fs laser-induced surface structures on metals can be replicated to the plastic surfaces and potentially beneficial to control the optical and wetting properties of the surface of injection molded and imprinted products.

• 환경위생공학
• /
• 제9권1호
• /
• pp.53-61
• /
• 1994

Sungnam city, as a major satellite town, is located in the southeast of Seoul. Atmospheric conditions are so stable that air pollutants from various emissions are tend to resist change because Sungnam city is located in the Namhansansung valley. The industrial distribution of Sungnam city are composed of various manufactories such as foods, fibers, chemicals, machinery and electronics etc. The heavy metal concentrations and size distribution are the most important parameters influencing among the way in which respirable suspended particulate matter interact with the human respiratory system. Respirable suspended particulate matter was collected on glass fiber filters from April 1993 to February 1994 according to particle size using Anderson sampler during 10 days per month at Sungnam city. 6 heavy metals, Fe, Zn, Pb Mn, Cu and Cd, were analyzed by particle size with atomic absorption spectrophotometry . The results could be summarized as follows: 1. The annual arithmetic mean concentration of total suspended particulate was 116.3$\mu $g/m$^{3}$ m', seasonal variation was the highest in spring season(196.5$\mu $g/m$^{3}$) and the lowest in Summer Season(72.9$\mu $g/m$^{3}$). 2. The ratio of airborne particulate concentrations respirable to nonrepairable( Res/Non- Res) of annual arithmetic mean value was 5.8'1, seasonal variation was highest in the spring season(6.3 : 1) and lowest in the summer season(4.6 : 1). 3. During the spring season the shape of the size distribution was trimodal which showed peaks at 3 size groups, which were below of 0.43$\mu $m, 3.3∼4.7$\mu $m and above of 11.0$\mu $g/m$^{3}$ respectively. 4. Respirable suspended particulate matter concentrations of Zn, Pb Cu and Cd were the highest in below of 0.43$\mu $m as follows; 0.517$\mu $g/m$^{3}$, 0.411 $\mu $g/m$^{3}$, 0.062$\mu $g/m$^{3}$ and 0.0310$\mu $g/m$^{3}$ , respectively, Fe and Mn were the highest in the particle size range of 4.7 ∼ 7.0$\mu $m as follows; 2.504$\mu $g/m$^{3}$ and 0.095$\mu $g/m$^{3}$, respectively. 5. The Pt Cd, Zn, Cu, Fe and Mn concentrations of annual arithmetic mean value respirable to non- respirable( Res/Non- Res ) were 33.65, 19.27, 17.74, 10.54, 3.20 and 5.20, respectively.

• 대한환경공학회지
• /
• 제27권2호
• /
• pp.151-157
• /
• 2005

본 연구에서는 퇴적물에서 일어나는 유기물 분해과정 중 이용된 전자 수용체와 분해과정에서 생산된 환원 물질의 농도 변화를 적절히 파악하고 정량화하기 위한 수치모델을 개발하였다. 퇴적물에 서식하는 미생물이 전자 수용체를 이용하여 유기물을 분해하는 반응들은 전자 수용체의 종류에 따라서 다음과 같이 6가지 형태로 구분 할 수 있다: (1) 호기성 분해(Aerobic Respiration), (2) 탈질(Denitrification), (3) 망간 환원(Manganese Reduction), (4) 철 환원(Iron Reduction), (5) 황산염 환원(Sulfate Reduction), (6) 메탄 환원(Methanogenesis). 이와 같은 6가지 반응은 양론(Stoichiometry)적으로 표현되어지며, 여기에 관여하는 3개의 고형물질(침전성 유기물질, manganese oxides, iron oxides)과 8개의 용존물질 (oxygen, nitrate, sulfate, ammonia, dissolved manganese, dissolved iron, sulfide, methane)의 움직임은 1차원 물질수지 방정식으로 모델에서 재현되어졌다. 퇴적물에서 미생물에 의한 유기물 분해 반응은 Monod 반응식을 이용하여 간단히 표현되어졌다. 퇴적물에 포함된 물질들에 대한 물질수지 방정식들은 Monod 반응식에 포함된 비선형성을 제거하기 위해서 다단계의 반복적인 수치해석법에 의해 안정적인 해를 구할 수 있었다. 모델의 타당성을 검토하기 위하여 Sweert et al.(1991a)이 Netherland의 Veluwe 호수의 퇴적물에서 조사한 자료에 모델결과를 비교하였고, 결과로써 산출된 전자 수용체와 환원 물질의 수직적 분포형태는 관측간과 비교적 잘 부합하였다. 그러나 모델을 통하여 예측된 $NH_4^+$의 농도는 측정된 농도보다 훨씬 낮은 것이 관찰이 되었는데, 이는 모델에서 유기물질을 표현할 때 사용한 Redfield의 유기물식이 본 연구에 적용된 퇴적물에서의 높은 질소 함유율을 적절히 표현하지 못한 결과로 해석되어 질 수 있다. 퇴적물 깊이에 따른 전자 수용체와 환원된 물질의 분포변화는 중금속의 재용출과 생물이용도를 조절하는 주요인이 되기 때문에, 이 연구에서 개발된 수치모델은 퇴적물에서 일어나는 미량 오염 물질의 거동을 파악하기 위해 유용하게 사용되어질 수 있을 것으로 사료된다.

• 한국해양학회지:바다
• /
• 제10권3호
• /
• pp.145-153
• /
• 2005

산소가 고갈된 혐기성 환경의 유기물 분해 및 물질순환에서 철 환원반응의 생태/환경적 중요성에 대해 고찰하였다. 다양한 해양환경에서 유기물 분해 시 철 환원이 차지하는 중요성은 미약한 수준에서 거의 $100\%$에 이르기까지 그 범위가 극단적으로 다양하게 나타났다. 일반적으로 철 환원은 Fe(III)의 농도가 높은 곳에서 황산염 환원보다 중요한 유기물 분해 경로로 나타나, 유기물 분해에서 철 환원의 중요성은 철 환원세균이 이용 가능한 Fe(III)의 공급정도에 의해 결정되는 것으로 인식되었다. 산소공급이 미약한 연안혐기성 퇴적토 내에서 Fe(III)의 공급은: (1)조석에 의한 퇴적물 내 공극수의 교환(tidal flushing): (2)저서동물에 의한 생물교란: (3)식생의 유무에 따른 퇴적물의 산화/환원 상태의 변화 등에 의해 주로 영향을 받는 것으로 나타났다 철 환원세균에 의한 유기물 분해 및 다양한 금속원소의 전환기능을 이용한 특정 유기오염원과 금속오염원의 생물정화는 우리나라와 같이 부영양화된 연안생태환경의 개선 및 독성 유t무기 오염원의 생물정화 등 연안역의 환경친화적 관리가 절실히 요구되는 환경에서 생태/환경공학 분야의 유용한 해결수단으로 간주된다.

• 천문학회지
• /
• 제37권5호
• /
• pp.447-454
• /
• 2004

During the hierarchical formation of large scale structure in the universe, the progressive collapse and merging of dark matter should inevitably drive shocks into the gas, with nonthermal particle acceleration as a natural consequence. Two topics in this regard are discussed, emphasizing what important things nonthermal phenomena may tell us about the structure formation (SF) process itself. 1. Inverse Compton gamma-rays from large scale SF shocks and non-gravitational effects, and the implications for probing the warm-hot intergalactic medium. We utilize a semi-analytic approach based on Monte Carlo merger trees that treats both merger and accretion shocks self-consistently. 2. Production of $^6Li$ by cosmic rays from SF shocks in the early Galaxy, and the implications for probing Galaxy formation and uncertain physics on sub-Galactic scales. Our new observations of metal-poor halo stars with the Subaru High Dispersion Spectrograph are highlighted.

• 한국환경보건학회지
• /
• 제29권1호
• /
• pp.67-73
• /
• 2003

This study was carried out to characterize the behavior and sources of particulate trace metal in Daegu city. TSP (Total Suspended Particulate matter) was collected by filters on High Volume Air Sampler from the four areal (reference, residential, commercial, industrial area). The moult were analyzed by AAS after preliminary treatment. The average centration trend of trace metals contained in TSP was shown as follows : Fe > Cu > Pb > Mn > Ni > Cr > Cd. The trace metals showed the highest concentration in the industrial area. This study showed the seasonal variation of trace metals. Fe and Mn showed high concentration in spring, whereas Cr, Ni, Cd and Pb showed high concentration in winter. Also this study showed the regional variation of trace metals. The order of the average concentration of trace metals was : industrial > commercial > residential > reference area. Using Mn as a reference element, the enrichment factor analysis were used for identifying the trace element contributors. The enrichment factors of Cr, Fe < 10 were considered to have a significant dust and soil source and termed nonenriched. Pb, Cd, Cu >>10 were enriched and had a significant fraction which was contributed by anthropogenic sources.

• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.96-100
• /
• 2002

본 연구는 광산지역에 있어서 중금속에 의한 광산폐수 오염을 방지하고 그 대책을 마련하고자 한다. 본 연구는 우선적으로 높은 양이온 치환능력을 가진 환경 보전성 재료를 선택하는 데에 있다. 이에 환경보전성 재료로써 고령토, 실리카, 제올라이트, 폐석탄재 등을 선정하였고, 이 재료를 광산폐수에 적용하여 광산폐수의 중금속 수준을 감소시키고 유출수의 수질을 개선하는데 목적이 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.442-446
• /
• 2004

Reducing the particle size of drug materials down to submicron is an important matter in pharmaceutical industry. Cryogenic milling technology is one of the mechanical milling processes, which is mostly utilized in refining grain size of metal and ceramics at extremely low temperature environment. This technique has not been readily studied in application to medical and biotechnology. This paper, therefore, describes the application of cryogenic milling process to reduce particle size of Ibuprofen. The shape and size of the Ibuprofen particle before and after the cryogenic ball milling process were analyzed. XRD analysis was performed to examine a change in crystallinity of Ibuprofen by the cryogenic ball milling process. The results showed that the size of Ibuprofen particles was reduced to 1/10 or less of its initial size. The results also showed that the degree of crystallinity of Ibuprofen was slightly reduced after cryogenic ball milling with nitrogen