• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.25-30
• /
• 2015

직경 20 nm 미만의 금속 나노입자들이 나타내는 저온 용융특성을 이용한 새로운 패드 피니쉬 공정을 적용하여 Cu 표면을 SAC305로 코팅한 후 wettability의 변화를 평가하였다. SAC305 잉크를 사용한 $160^{\circ}C$의 저온 코팅공정 시 형성되는 SAC305 코팅층의 두께는 수 나노미터 수준으로 극히 얇았으며, 이 코팅층 밑으로 10~100 nm 두께 수준의 $Cu_6Sn_5$ 및 50~150 nm 두께 수준의 $Cu_3Sn$ 금속간화합물층 반응층이 생성되었음을 확인할 수 있었다. 즉, 생성된 금속간 화합물층의 두께는 압연동 시편에 비해 전해도금동 시편에서 훨씬 두꺼웠는데, 이는 전해도금동 시편에서 관찰되는 향상된 표면 거칠기 특성에 의해 단위면적 기준으로 보다 많은 수의 SAC305 나노입자들이 접촉된 상태에서 용융되어 반응하기 때문으로 분석되었다. 이후 SAC305 솔더볼을 사용한 젖음각 측정 실험에서 저온 SAC 코팅이 이루어진 Cu 표면은 SAC 코팅이 없는 Cu 표면에 비해 눈에 띄게 낮은 젖음각을 나타내어 당 코팅법으로 Cu 표면에 단지 수 나노미터 두께의 SAC305 층을 형성시킨 경우에서도 솔더의 wettability 개선을 유도할 수 있음을 확인할 수 있었다.

• 보존과학회지
• /
• 제37권3호
• /
• pp.289-301
• /
• 2021

고문헌 조사에서 목판 인쇄된 것인지 금속활자로 인쇄된 것인지를 판별해야 하는 경우가 있다. 우리나라는 물론이고 세계적으로 금속활자의 발명과 활용시기가 어떻게 판정되느냐에 따라 인쇄의 역사가 바뀔 수 있기 때문이다. 목판본과 금속활자본의 판정에는 다양한 정보가 활용되고 있으나 간기(刊記)를 비롯한 인쇄 배경에 관한 정보가 없는 경우에는 인쇄된 문서의 글자, 광곽, 먹의 종류, 먹의 제작시대, 한지의 제작시기 정보를 분석하여 고문서의 제작시기와 인출(印出)방법에 관한 판정을 하게 된다. 이러한 정보가 체계적으로 자료화되어 있지 않아 연구자의 경험과 감각에 의한 판단에 의지할 수밖에 없는 상황이다. 본 연구에서는 완판본(完板本) 심청전 복각 목판을 이용하여 목판본의 인출 특성을 실험적으로 조사하였다. 목판본 인출 시에 나타나는 다양한 현상과 특징을 자료화하여 고문헌의 인출방법을 판정하는 데 참고할 수 있도록 하였다. 간기가 없는 목판 고소설의 경우 목판의 마모정도에 따라서 인출시기의 전후관계 추정에도 참고자료로 활용할 수 있을 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.502-502
• /
• 2007

Current thin film process using memory device fabrication process use expensive processes such as manufacturing of photo mask, coating of photo resist, exposure, development, and etching. However, direct printing technology has the merits about simple and cost effective processes because inks are directly injective without mask. And also, this technology has the advantage about fabrication of fine pattern line on various substrates such as PCB, FCPB, glass, polymer and so on. In this work, we have fabricated the fine and thick metal pattern line for the electronic circuit board using metal ink contains Ag nano-particles. Metal lines are fabricated by two types of printing methods. One is a conventional printing method which is able to quick fabrication of fine pattern line, but has various difficulties about thick and high resolution DPI(Dot per Inch) pattern lines because of bulge and piling up phenomenon. Another(Second) methods is sequential printing method which has a various merits of fabrication for fine, thick and high resolution pattern lines without bulge. In this work, conductivities of metal pattern line are investigated with respect to printing methods and pattern thickness. As a result, conductivity of thick pattern is about several un.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.439-444
• /
• 2022

Laser-induced plasmonic sintering of metal nanoparticles (NPs) is a promising technology to fabricate flexible conducting electrodes, since it provides instantaneous, simple, and scalable manufacturing strategies without requiring costly facilities and complex processes. However, the metal NPs are quite expensive because complicated synthesis procedures are needed to achieve long-term reliability with regard to chemical deterioration and NP aggregation. Herein, we report laser-induced Ag NP self-generation and sequential sintering process based on low-cost Ag organometallic material for demonstrating high-quality microelectrodes. Upon the irradiation of laser with 532 nm wavelength, pre-baked Ag organometallic film coated on a transparent polyimide substrate was transformed into a high-performance Ag conductor (resistivity of 2.2 × 10^-4 Ω·cm). To verify the practical usefulness of the technology, we successfully demonstrated a wearable transparent heater by using Ag-mesh transparent electrodes, which exhibited a high transmittance of 80% and low sheet resistance of 7 Ω/square.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.95-107
• /
• 2007

This study starts to find a way out, experiment and apply commercial UV coatings to the cap closures. The cap closures is made form coating and succeeding deformation process. It is coated with several printing layers, printing and over print varnish coating. Then it pressed in three steps of press called 'deep-drawing'. In this study, two kinds of coating was designed and accomplished in the base of the same manufacturing and environment conditions. Consequently, UV curable ink have adequate performance in this experiment (T-bending, Erichsen Test), but it were experienced several damages in this experiments (web-bending, impact test). They were not cured enough to endure the friction and a unique shape of serial cracks were appeared.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.293.1-293.1
• /
• 2016

Various materials including conductive, dielectric, and semi-conductive materials, constitute suitable candidates for printed electronics. Metal nanoparticles (e.g. Ag, Cu, Ni, Au) are typically used in conductive ink. However, easily oxidized metals, such as Cu, must be processed at low temperatures and as such, photonic sintering has gained significant attention as a new low-temperature processing method. This method is based on the principle of selective heating of a strongly absorbent film, without light-source-induced damage to the transparent substrate. However, Cu nanoparticles used in inks are susceptible to the growth of a native copper-oxide layer on their surface. Copper-oxide-nanoparticle ink subjected to a reduction mechanism has therefore been introduced in an attempt to achieve long-term stability and reliability. In this work, a flash-light sintering process was used for the reduction of an inkjet-printed Cu(II)O thin film to a Cu film. Using a photographic lighting instrument, the intensity of the light (or intense pulse light) was controlled by the charged power (Ws). The resulting changes in the structure, as well as the optical and electrical properties of the light-irradiated Cu(II)O films, were investigated. A Cu thin film was obtained from Cu(II)O via photo-thermal reduction at 2500 Ws. More importantly, at one shot of 3000 Ws, a low sheet resistance value ($0.2527{\Omega}/sq.$) and a high resistivity (${\sim}5.05-6.32{\times}10^{-8}{\Omega}m$), which was ~3.0-3.8 times that of bulk Cu was achieved for the ~200-250-nm-thick film.

• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.186-189
• /
• 2011

PURPOSE. Porcelain fused to metal (PFM) crowns provide the best treatment option for teeth that have a large or defective restoration. More than 20% of teeth with PFM crowns or bridges require non-surgical root canal treatment (NSRCT). This may be due to the effect of restorative procedures and the possible leakage of bacteria and or their by-products, which leads to the demise of the tooth pulp. Thus, this study was planned to compare the ability of the restorative materials to seal perforated PFM specimens. MATERIALS AND METHODS. The study evaluates the ability of amalgam, composite or compomer restorative materials to close perforated PFM specimen's in-vitro. Ninety PFM specimens were constructed using Ni-Cr alloys and feldspathic porcelain, and then they were divided into 3 groups: amalgam (A), composite + Exite adhesive bond (B) and compomer + Syntac adhesive bond (C). All the PFM samples were embedded in an acrylic block to provide complete sealing of the hole from the bottom side. After the aging period, each group was further divided into 3 equal subgroups according to the thermocycling period (one week for 70 cycles, one month for 300 cycles and three months for 900 cycles). Each subgroup was put into containers containing dye (Pelikan INK), one maintained at $5^{\circ}C$ and the other at $55^{\circ}C$, each cycle for 30 sec time. The data obtained was analyzed by SPSS, 2006 using one way ANOVA test and student t-test and significant difference level at (P<.01). RESULTS. The depth of dye penetration was measured at the interfaces of PFM and filling materials using Co-ordinate Vernier Microscope. The lowest levels of the dye penetration for the three groups, as well as subgroups were during the first week. The values of dye leakage had significantly increased by time intervals in subgroups A and C. CONCLUSION. It was seen that amalgam showed higher leakage than composite while compomer showed the lowest level of leakage.

• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.8-13
• /
• 2016

본 논문에서는 잉크젯 프린팅 기술을 이용하여 종이 필름 위에 전도성 잉크를 인쇄하여 방사 패턴 변환이 가능한 종이접기 형태의 안테나를 제안한다. 제안된 안테나는 접었을 때와 펼쳤을 때 각각 다이폴 안테나와 루프 안테나로 동작하며, 종이 필름을 접고 펼치는 방식에 따라 상호 변환될 수 있다. 제안된 안테나는 다이폴 상태와 루프 상태일 때 모두 동일하게 1.85 GHz에서 동작하도록 설계되었다. 종이 필름을 접었을 때 종이 필름의 코팅과 그 위에 인쇄된 전도성 잉크가 깨짐 현상을 해결하기 위해 액체금속(liquid metal)중 하나인 EGaIn(Eutectic Gallium Indium)을 사용하였다. 제안된 안테나의 성능은 시뮬레이션과 실제 측정 결과로 확인할 수 있으며, 다이폴 상태와 루프 상태일 때 안테나 이득은 각각 -4 dBi, -5 dBi이다. 또한, 측정 결과, 다이폴 상태와 루프 상태일 때 서로의 Null 부분을 서로 상호 보완해 주는 것을 확인할 수 있다.

• 한국입자에어로졸학회지
• /
• 제17권2호
• /
• pp.21-27
• /
• 2021

We developed non-metallic electrodes that can replace metallic electrodes of the electrostatic precipitator(ESP) for the purpose of light weight, corrosion resistance, cost reduction. We manufactured three types of collection electrodes made of stainless steel (M), Carbon ink coating layer-Plastic sheet-Carbon ink coating layer (CPC), and Plastic sheet-Carbon ink coating layer-Plastic sheet (PCP). We studied the collection efficiency of a two-stage ESP using oil mist particles with and without collection stage by changing the flow rate, the material of collection electrode, and the applied voltage of the pre-charger module and the collection module. Here we measured concentrations of particles at diameters of 0.45 ㎛ (CMD; count median diameter) and 3.0 ㎛ (MMD : mass median diameter), as well as PM_2.5 and PM₁₀. As a result of the experiment, two-stage ESP had 22~25% higher collection efficiency in PM_2.5 than one-stage ESP at the same applied voltage. The difference in collection efficiency by varying the materials of collection electrodes was less than 5%. The weight of the non-metallic electrode was only one eighth the weight of the metal electrode. CPC electrode had a thickness of 0.27 mm, which was 1.5 times thinner than a thickness of PCP electrode, so when the flow rate increased, the CPC electrodes couldn't be kept at equal intervals due to the fluttering unlike PCP electrodes. In addition, the PCP-CPC collection module of the present experiment followed the theoretical efficiency based on Deutsch equation and Cochet's charging theory.

• 청정기술
• /
• 제28권4호
• /
• pp.323-330
• /
• 2022

미세유체 종이-기반 분석 장치는 최근 현장 진단 및 환경 물질 감지를 포함한 다양한 적용가능성으로 주목을 받고 있다. 본 연구는 적은 비용과 간단한 검출 방법으로 중금속을 빠르게 검출할 수 있는 3D-μPAD를 제작하기 위해 PDMS 양면 인쇄 방법을 제안하였다. 3D-μPAD 디자인은 레이저 커팅으로 아크릴 스탬프에 적용할 수 있으며, 제작된 스탬프에 PDMS 고분자를 스핀 코팅 후 양면접촉인쇄 방식 도입을 통해 3차원 형태의 소수성 장벽 형성에 필요한 조건을 확인하였다. 구체적으로 소수성 장벽 형성 조건인 고분자 농도, 스핀 코팅 속도 및 접촉 시간에 따라 PDMS 소수성 장벽 면적과 친수성 채널의 면적 변화를 분석함으로써 3D-μPAD 제작 공정 조건 최적화를 수행하였다. 최적화된 μPAD로 니켈, 구리, 수은 이온, pH를 다양한 농도에서 검출하였고 이를 ImageJ 프로그램으로 분석하여 grayscale 값으로 정량화 하였다. 이를 통해 3D-μPAD를 제작함으로써 특별한 분석 기기 없이 다양한 중금속 비색 검출을 수행함으로써 조기진단 바이오 센서로의 응용 가능성을 증명하였다. 이 3D-μPAD는 휴대가 간편한 다중 금속이온 검출 바이오센서로서, 신속한 현장 모니터링이 가능하므로 개발도상국 같은 자원이 제한된 지역에서 유용하게 사용 가능하다.