• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.337-343
• /
• 2021

In this work, self-absorption correction factor related to the variation of the composition and the density of soil samples were evaluated using the p-type HPGe detector. The validated MCNP5 simulation model of this detector was used to evaluate its Full Energy Peak Efficiency (FEPE) under the variation of the composition and the density of the analysed samples. The results indicates that FEPE calculation of low gamma ray is affected by the composition and the density of soil samples. The self-absorption correction factors for different gamma-ray energies which was fitted as a function of FEPEs via density and energy and fitting parameters as polynomial function for the logarithm neper of gamma ray energy help to calculate quickly the detection efficiency of detector. Factor Analysis for the influence of the element composition in analysed samples on the FEPE indicates the FEPE distribution changes from non-metal to metal groups when the gamma ray energy increases from 92 keV to 238 keV. At energies above 238 keV, the FEPE primarily depends only on the metal elements and is significantly affected by aluminium and silicon composition in soil samples.

• 공업화학
• /
• 제34권5호
• /
• pp.556-565
• /
• 2023

Fast industrial and agricultural expansion result in the production of heavy metal ions (HMIs). These are exceedingly hazardous to both humans and the environment, and the necessity to eliminate them from aqueous systems prompts the development of novel materials. In the present study, a UIO-66 (COOH)₂ metal-organic framework (MOF) containing free carboxylic acid groups was post-synthetically modified with L-glutamic acid via the solid-solid reaction route. Pristine and glutamic acid-treated MOF materials were characterized in detail using several physicochemical techniques. Single-ion batch adsorption studies of Pb(II) and Hg(II) ions were carried out using pristine as well as amino acid-modified MOFs. We further examined parameters that influence removal efficiency, such as the initial concentration and contact time. The bare MOF had a higher ion adsorption capacity for Pb(II) (261.87 mg/g) than for Hg(II) ions (10.54 mg/g) at an initial concentration of 150 ppm. In contrast, an increased Hg(II) ion adsorption capacity was observed for the glutamic acid-modified MOF (80.6 mg/g) as compared to the bare MOF. The Hg(II) ion adsorption capacity increased by almost 87% after modification with glutamic acid. Fitting results of isotherm and kinetic data models indicated that the adsorption of Pb(II) on both pristine and glutamic acid-modified MOFs was due to surface complexation of Pb(II) ions with available -COOH groups (pyromellitic acid). Adsorption of Hg(II) on the glutamic acid-modified MOF was attributed to chelation, in which glutamic acid grafted onto the surface of the MOF formed chelates with Hg(II) ions.

• Advances in materials Research
• /
• 제2권1호
• /
• pp.37-49
• /
• 2013

The transition metal salt doped solid polymer electrolyte [TSPE] were prepared with HPMC as a host polymer. The virgin and doped films were prepared by solution-casting method and investigated using wide angle X-ray scattering method. Micro structural parameters like lattice strain (g%), stacking/twin faults, the average number of unit cells counted in a direction perpendicular to the Bragg's plane (hkl) spacing of (hkl) planes dhkl, crystallite size Ds, distortion width, standard deviation were determined by whole pattern powder fitting (WPPF) method, which is an extension of single order method. It is found that the crystallite size decreases with the increase in the content of $FeCl_3$. This decrease is due to increase in localized breaking of polymer network which also accounts for the amorphous nature of the material. The filler inorganic salt $FeCl_3$ acts as plasticizer. FTIR study also confirms and justifies the interaction between the polymer and in-organic salt in the matrix. Physical properties like mechanical stability and Ac conductivity in these films are in conformity with the X-ray results.

• 한국환경농학회지
• /
• 제16권2호
• /
• pp.142-148
• /
• 1997

중금속오염폐수처리에의 미생물 이용 가능성을 검토하기 위하여 중금속에 강한 내성을 지님과 동시에 균체내 중금속 축적능력이 우수한 중금속 내성균을 분리하여 competing ion, 대사저해제 등과 같은 외부 요인에 따른 균체내 중금속 축적변화를 조사한 결과는 다음과 같다. 중금속을 처리한 용액중 양이온인 $Al^{3+}$이온과 음이온인 $CO_3\;^{2-}$ 및 $PO_4\;^{2-}$이온이 competing ion으로 존재할 경우 중금속 내성균의 균체내 중금속 축적은 크게 감소되었으나, 그외 다른 양이온들과 음이온들에 대해서는 거의 영향을 받지 않았다. Cd, Zn 및 Cu 내성균주의 Cd, Zn 및 Cu 축적은 대사저해제에 의하여 크게 감소되었으나, Pb 내성균주에 의한 Pb 축적은 거의 영향을 받지 않는 것으로 나타나 Cd, Zn 및 Cu 내성균주의 Cd, Zn 및 Cu 축적은 에너지 의존적인 과정으로서 물질대사와 관련되어 있는 것으로 생각되었으며, Pb 내성균주의 Pb 축적은 에너지 비의존적인 과정으로서 물질대사와 관련이 별로 없는 물리적인 과정에 의하여 축적되는 것으로 생각되었다. 각 중금속 내성균주들은 해당 중금속 축적능력에 비하여 낮았으나 타 중금속들의 축적능력도 있었으며, 여러가지 중금속들을 동일 농도로 복합처리 하였을 경우 해당 중금속들의 축적능력이 타 중금속들에 비하여 매우 높게 나타나 각 중금속 내성균주들의 해당 중금속 축적은 선택적인 과정에 의하여 축적되는 것으로 생각되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제6회 학술발표회 논문개요집
• /
• pp.43-43
• /
• 1994

We studied chemical reactio of Eu metal on the in situ cleaved CdTe(110) surface by pphotoemission sppectroscoppy using synchrotron radiation. The chamber was maintained with base ppressure $\leq$2${\times}$10-10 mb during the expperiment. The expperiment was carried out in pphoton Factory in Jappan. Core level pphotoemission sppectroscoppy was carried out with Al K${\alpha}$ Line. The CdTe simiconductor was determined to be pp-typpe with low dopping concentration from Hall measurement. We found that there are two reacted pphases of Te with Eu (related to divalent Eu and trivalent Eu, resppectively) from least square fitting of Te 4d sppectra, but three is no indication of Cd reaction. Trivalent Eu exists after roughly one monolayer depposition (600 sec. depposition time is considered as one monolayer), which is also observed at Eu 3d core level sppectra. Overlayer Eu is metallized after roughly 2 monolayers depposition, as can be deduced from the fact that metallic edge near Fermi level begins to appear. The intensity of core-level of Te decreases expponentially at the initial stage (near one monolayer) and after one monolayer depposition it decreases more slowly due to Te out-diffusion. We categorized the growth mode of Eu on CdTe as S-K growth mode (cluster formation after one monolayer deppisition) from the relative intensity pplot of Te 4d normalized to the cleaved surface. At cleaved surface band bending is already established due to surface defects. At first 100 sec. depposition time the shift toward lower binding side by 0.6 eV is found at all core level sppectra of all elements in semiconductor. This shift is considered as the re-adjustment of surface Fermi level to the pposition induced by Eu metal (0.2 eV above the valence band maximum).

• 한국재료학회지
• /
• 제5권7호
• /
• pp.775-780
• /
• 1995

MOCVD(Metal-Organic Chemical Vapor Dposition) TiN 박막을 다양한 온도와 압력에서 tetrakis-dimethyl-amino-titanium(TDMAT (Ti[N($CH_3$)$_2$]$_4$))의 자체 열분해와 NH$_3$와의 반응을 사용하여 형성하였다. 비저항은 박막내의 불순물 함량에 의존하였는데 특히 XPS curve fitting 결과 주요 불순물인 탄소와 산소 같은 불순물들이 박막내에서 다양한 침입형화합물을 만들어 박막의 물리적, 전기적 특성에 영향을 준다는 것을 알았다. Metal-organic source만을 사용하여 TiN을 형성할 경우 지름이 0.5$\mu\textrm{m}$이고 aspect ratio가 3:1인 구멍에서 step coverage가 매우 우수하였으나 NH$_3$를 흘림에 따라 step coverage가 감소하는 것이 SEM으로 확인되었는데 이는 각각의 활성화에너지와 관련된 것으로 보인다.

• 대한화학회지
• /
• 제53권6호
• /
• pp.693-703
• /
• 2009

소염제 piroxicam (PX, 4-hydroxy-2-methyl-N-2-pridyl-2H-1, 2-benzothiazine-3-carboxadiamide-1,1-dioxide)의 착물형성을 전이금속이온, Co(II), Ni(II), Cu(II), Zn(II)과 함께 메탄올(MeOH)/물 이성분 혼합물에서 25$^{\circ}C$, 일정한 pH=5.0와 I=0.1 M에서 분광광도법으로 연구하였다. 컴퓨터 프로그램 SQUAD를 스팩트라 데이터로부터 원하는 정보를 얻는데 사용하였다. Fitting 과정의 output은 안정도 상수, 평가한 안정도 상수의 표준편차, 농도분포 다아그램, 모든 종의 스팩트럼 프로파일이다. Co(II), Ni(II), Cu(II), Zn(II)의 PX 착체의 안정도 순서는 Cu(II) > Co(II) > Ni(II) ${\approx}$ Zn(II) 순서이다. 이것은 이들 금속이 온들이 기하학적 경향이 다른 이유일 것이다. PX의 산성도 상수는 다른 pH 값에서 흡수 스펙트럼으로 부터 위의 조건에서 역시 결정하였다. 컴퓨터 프로그램 DATAN을 PX의 산성도 상수의 결정하는 데 사용하였다. 산성도 상수의 validity는 잘 알려진 컴퓨터 프로그램 SPECFIT/32을 사용하였다. 안정 및 산성도 상수의 용매성질, 음이온과 같은 다른 인자의 효과에 관하여 자세하게 논의하였다.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.39-46
• /
• 2011

The automotive air conditioning hose is used for connecting the components of air conditioner in a vehicle. The hose is usually manufactured by the swaging process to connect the rubber hose with the metal fitting at the end of the hose. In case that the clamping force is small, the refrigerant gas in the hose can leak locally under the severe operating circumstances. The practical test of clamping force is performed by means of the measurement of separation force. In this study, the swaging process of a hose is simulated with the finite element method, to investigate the effect of friction coefficient on the clamping force. The contact condition is used in consideration of real manufacturing process, and the material properties for the Mooney-Rivlin model is obtained by the experimental results. The result interpretations are focused on the contact forces, which is displayed graphically with respect to friction coefficient, on the surfaces between the hose and the metal fittings.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.89-92
• /
• 2007

The metallic bipolar plate in PEMFC is widely used for automotive driving because of its advantages, i) high strength, ii) high chemical stability, iii) low gas permeability and iv) applicability to mass production. Especially, the metallic bipolar plate which is manufactured with the sheet metal stamping process can be applied in automotive PEMFC with less volume and weight because of its thin thickness but the formability and springback problems arise in real manufacturing process. The assessment for formability and springback of metallic bipolar plate should be performed before making stamping die sets. In this work, the methodology for determining the allowable draft angle of flow passage is introduced by using finite element analysis. In analysis results, as the draft angle of flow passage increase, the major strain and thinning is increase with exponential function. The allowable draft angle without fracture is presented by fitting the results. Additionally, the staking results with manufactured metallic bipolar plates by stamping process is presented.

• 소성∙가공
• /
• 제27권2호
• /
• pp.115-122
• /
• 2018

Most domestic and international standards on the forming limit diagram (FLD) including ISO 12004-2, use a 'position-dependent method,' which determines the forming limit from a strain distribution measured on the specimen after necking or fracture. However, the position-dependent method has inherent problems such as the incidence of asymmetry of a strain distribution, the estimation of missing data near fracture, the termination time of test, and the deformation due to the new stress equilibrium after a fracture, which is blamed for causing sometimes a significant lab-to-lab variation. The 'time-dependent method,' which is anticipated to be a new international standard for evaluating the forming limit, is expected to greatly improve these intrinsic disadvantages of the position-dependent method. It is because the time-dependent method makes it possible to identify and accurately determine the forming limit, just before the necking point from the strain data as continuously measured in a short time interval. In this study, we propose a new time-dependent method based on a Gaussian fitting of strain acceleration with the introduction of 'normalized correlation coefficient.' It has been shown in this study that this method can determine the forming limit very stably and gives a higher value, which is in comparison with the results of the previously studied position-dependent and time-dependent methods.