• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.589-600
• /
• 1997

Cold-formed deck sections are used in many composite floor slab applications wherein the steel deck serves not only as the form for the concrete during construction but also as the principal tensile reinforcement for the bottom fiber of the composite slab. This paper provides the results of an experimental study performed for the composite slabs with the new shaped deck plates with the locking ribs, the dove tails, and the powerful embossment, which are the mechanical means to improve positive interlocking effect between the deck and the concrete. A total of 28 specimens are tested to investigate the composite effects between the concrete and metal deck plate. Important parameters in this are the span length, the thickness of the deck plate, support condition, and whether shear studs are placed at each support or not. The test results are summarized for the maximum load and failure behavior for the specimens.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.3
• /
• pp.19-29
• /
• 1997

The Chemical Oxygen Demand(COD) by potassium permanganate and potassium dichromate is used as a measure of the organic matter content of a sample. Newly proposed $K_{2}Cr_{2}O_{7}$ analysis method to be list at Korean Official Method was made from analysis and comparison of the experimental process on Japanese Industrial Standard(JIS), American Open Reflux and Closed Reflux Methods. New $K_{2}Cr_{2}O_{7}$ method had better the qualitative and reproducible COD results than another methods as a result of the tested four times repeatedly by using Lakes water Plant wastewater. The COD data ratio by $KMnO_{4}$ and $K_{2}Cr_{2}O_{7}$ methods was 2-3, 3, 2-17 and 3-4 times respectively when its data had compared with the lakes water and treated water of domestic and experimental wastewater, and raw wastewater which is generated at the manufacturing process of 6 steps and treated wastewater of chemistry source. Its ratio indicated to 2-4 and 2-3 times respectively on raw wastewater and plant wastewater of Chemistry, rubber and plastic, fiber, metal molding source. Oxidation ratio of benzene and ethyl benzene by $KMnO_{4}$ method was nearly zero, but the oxidation ratio by $K$_{2}Cr_{2}O_{7}$ method was 50%, 70% respectively. Also, Oxidation ratio of phenol by $KMnO_{4}$ and $K_{2}Cr_{2}O_{7}$ methods was 80%, 100% respectively, and trichloroethylene and tetrachloroethylene were not nearly oxidizd by $KMnO_{4}$ and $K_{2}Cr_{2}O_{7}$ methods. As the above contents, oxidation ratio and COD results by $KMnO_{4}$ and $K_{2}Cr_{2}O_{7}$ were different from various from various compounds and samples respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.933-937
• /
• 2002

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. Pressure vessels using this composite material in comparison with conventional metal vessels can be applied in the field where lightweight and the high pressure are demanded from the defense and aerospace industry to rocket motor case due to the merits which are energy cutdown the weight reduction and decrease of explosive damage preceding to the sudden explosion which is generated by the pressure leakage condition). In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding composite pressure vessel receiving an internal pressure, the standard interpretation model is developed by using the ANSYS, general commercial software, which is verified as the accuracy and useful characteristic of the solution based on Auto LISP and ANSYS APDL. Both the preprocessor for doing exclusive analysis of filament winding composite pressure vessel and postprocessor that simplifies result of analysis have been developed to help the design engineers.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.425-433
• /
• 2001

A correlation between fatigue damage and acousto-ultrasonic (AU) parameters has been obtained from signals acquired during fatigue loading of the single-lap joints of a carbon-fiber reinforced plastic (CFRP) laminates and A16061 plate. The correlation showed an analogy to those representing the stiffness reduction $(E/E_0)$ of polymer matrix composites by the accumulation of fatigue damage. This has been attributed to the transmission characteristics of acoustic wave energy through bonded joints with delamination-type defects and their influence on the change of spectral content of AU signals. Another correlation between fatigue cycles and the spectral magnitude of acoustic emission (AE) signals has also been found during the final stage of fatigue loading. Both AU and AE can be applied almost in real-time to monitor the evolution of damage during fatigue loading.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.239-246
• /
• 2007

The sulfonated ion exchange fibers were synthesized by $Co^{60}\;{\gamma}-ray$ radiation-induced graft copolymerization. Degree of grafting was increased with increasing the total dose. The degree of grafting for POF-g-St/DVB copolymer was 1000%. The ion exchange capacity of sulfonated ion exchange fibers were increased by increasing the degree of sulfonation. Its maximum value was 5.06 meq/g. The ion exchange capacity of sulfonated POF- co-St/DVB ion exchange fiber was higher than that of the sulfonated POF- co-styrene ion exchange fibers. The amount of adsorption for heavy metals were also increased with increase in the degree of grafting of the ion exchange fibers.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.94-98
• /
• 2008

In order to improve the specific capacitance of amorphous hydrous manganese oxide ($MnO_2$) for supercapacitors, it is made into composites with vapour-grown carbon nanofibers (VGCF) having the VGCF ratio as 40 wt% in the composites. The electrochemical properties of these composites are investigated in 1.0 M $Na_2SO_4$ by cyclic voltammetry (CV), impedance measurements and chronopotentiometric charger/discharger. The composite with 40 wt% VGCF shows the superior electrochemical performance, whose specific capacitance (based on the mass of $MnO_2$, $0.8mg/cm^2$) is 380 F/g at 20 mV/s and 230 F/g at 500 mV/s. Also, the cycle-life testing of this electrode carried out for 3,000 charge/discharge cycles at $2.0mA/cm^2$ shows 97% capacitance retention.

• Fashion & Textile Research Journal
• /
• v.5 no.3
• /
• pp.299-303
• /
• 2003

Some of historical textiles were analyzed to identify the imprinted textures on the metal remains of Haengyeup(a horse strap pendant) and Doja (a knife), which were excavated in the ruins of Hwangsung-dong, Kyungju city in the fifth century and textiles imprinted on the human bones that were excavated in the Pungnae 4th Area, Namyangju county in the sixteenth century. The results analyzed arc as follows ; It was confirmed that the imprinted textures of Haengyeup and Doja are white ramie since the structural characteristics of cellulosic bast fibers, partially projected long oval cross sections with large lumens and the imprinted textures of human bones are silk fabrics since the triangular cross sections of fibroin is showed. All of the textiles were designed in plain weaves. In the case of weaving yarns, the warp threads were thicker than the weft threads, that is, the imprinted textures of Haengyeup were measured by 1.35 mm for warp and 1.21 mm for weft, and the Doja by 1.16mm for warp and 1.11 mm for weft. In connection with the direction of the yarn twist, the Z-twist were observed in the imprinted textures of human bones, whereas it presented the S-twist in the case of Haengyeup and Doja. The warp yarns were mostly harder twisted than the weft yarns on the amounts of twist, that is, it was observed that the case of Haengyeup were amounted to 0.33 twists per centimeter for warp yarns and 0.25 twists per centimeter for weft yarns. Also it was showed 0.32 twists per centimeter for warp yarns and 0.26 twists per centimeter in the case of the textures of human bones. On the fabric counts, it was showed that the finer the yarns the higher the densities since it were $4.3{\times}5.1$ threads per sqaure centimeters and $7.6{\times}7.1$ threads per sqaure centimeters each in the case of Haengyeup and Doja, whereas it was $18.2{\times}33.7$ threads per sqaure centimeters in the case of the textures of human bones.

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.341-345
• /
• 2014

In this study, self-actuated photocatalyst that titanium dioxide doped by more than two transition metal was coated PU foam. The antibacterial and antifungal activity of self-actuated photocatalyst coated PU foam was characterized without light. The antibacterial property of self-actuated photocatalyst coated PU foam was shown to be reduced more than 96%, and the antifungal property was shown to be reduced more than 99.9%. The durability of self-actuated photocatalyst coated PU foam tested by Weather-O-meter showed the 7% reduction of formaldehyde decomposition from 96.5% before test to 89.8% after test. The observation of surface of PU foam coated with self-actuated photocatalyst showed that the catalyst was firmly attached to the surface of polyester fiber without separation.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.207-214
• /
• 2001

Silica glass is a core material for optical fiber in optical telecommunications, but its centrosymmetry eliminates the second order nonlinearity. But it is experimentally well known that the space charge polarization induces the Second Harmonic Generation (SHG) when a strong DC voltage is applied to silica glass for a long period of time with metal blocking electrodes. In this report, the results of a theoretical calculation of the nonlinear optical property caused by the space charge polarization, and a model of a numerical analysis to predict the small chance in nonlinear optical property as functions of time and space are provided. Assuming that amorphous silica is a solid state electrolyte and sodium ion is the only mobile charge carrier, 'Finite Difference Method' was employed for modeling of numerical analysis. The distributions of the concentration of sodium ion and electric field as functions of a normalized length of the specimen and a normalized applied voltage were simulated.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.33-43
• /
• 1994

In the present work, to clarify the mechanism of the neutral salt effect on the alkaline hydrolysis of PET, many salts with different cations like LiCl, NaCl, KCl, CsCl were added to the aqueous alkaline solutions. Then PET was hydrolyzed with aqueous solutions of many salts in alkali metal hydroxides under various conditions. Some conclusions obtained from the experimental results were summarized as follows. The reaction rate of the alkaline hydrolysis of PET was increased by the addition of neutral salts and In k was increased nearly linearly with the square root of ionic strength of reaction medium. This fact suggested that the ionic strength effect by Debye-Huckel and Bronsted theory was exerted on the reaction. The specific salt effect was also observed. The reaction rate was increased with the increase in the electrophilicity of cations of neutral salts, i. e., in the order of $Cs^+$/ < $K^+$/ $a^+$/ $i^$^+$. It was considered that the reaction rate was increased in the order of C $s^+$. < $K^+$. $a^+$. $i^+$. because the lowering effect of the cations on the negative charge of PET surface was increased with the electrophilicity of cations. It was thought that $E_{a}$ was increased because the cations of neutral salts decreased the negative charge of PET surface. It, however, was inferred from the increase in ${\Delta}$S＊ and the decrease in the ${\Delta}$G＊ that the cations of neutral salts associated with PET increased the collision frequency between carbonyl carbon and OH- ion and then accelerated the reaction rate.te.