• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.2
• /
• pp.141-148
• /
• 2001

Insecticidal effect or sulfuryl fluoride ($SO_2F_2$) to cigarette beetle, Lasiodema serricorne (F.), was studied in two different containers, one was 1m$^3$(without cardboard block) and the other was 0.5m$^3$(with cardboard block). Adults and larvae were transferred into a small metal can before placed in the containers. Each can was held for 8, 24, 48, 72, and 96 hours after $SO_2F_2$(10, 20, 30, and 40 g/$\ell$) treatment. All adults were killed in an 1m$^3$container. Larval mortality was 99 to 100% when the dosage of SO$_2$F$_2$was 10 and 20 g/$\ell$. Cardboard was attached between two 0.5m$^3$ containers ; one was fumigation area and the other was insect area. SO$_2$F$_2$ penetrated cardboard within 24 hours in most trials. $SO_2F_2$could affect all adults and larvae regardless of their susceptibility. All adults were killed at 8 hours in a 0.5m$^3$ container. But low mortality of larvae was recorded at 8 hours when small dosage was treated (30% in 10 g/$\ell$, 87.2% in 20 g/$\ell$). The mortality was increased as SO$_2$F$_2$ dosage increased. Six different metals (stainless, copper, brass, aluminum, iron, and zinc) were also tested to study metal corrosion and discoloration. No corrosion and discoloration was observed in most metals treated with $SO_2F_2$.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.47-55
• /
• 2014

The purpose of the study is to produce a mechanically improved weld and minimum variation of color through comparing unpulsed and pulsed GTAW (Gas Tungsten Arc Welding) for pure titanium (CP grade7) tube. Pulsed GTAW using 60 A peak current and 20 A background current (1:9) achieved the wider window of welding conditions having part and full penetration without burn-through than the case of unpulsed GTAW. Moreover, the pulsed welding reduced a discoloration on the back bead of the weld and the size of microstructures (basket weave and serrated ${\alpha}$). That is because the pulsed welding has it's a low heat input and severe weld flow induced from electric current variation. Furthermore, the pulsed welding improved the bending property of the welded Ti tube. The enhanced bending property for the pulsed GTAW was due to the insignificant discoloration on the weld surface with maintaining the metal polish.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2007

OSP(organic solderability preservatives) finish has been considered as a very effective process for substituting the metal surface treatment of Ni/Au finish because of lower cost, interface property and environmental issue of OSP finish. However, the discoloration of OSP layer is formed during assembly process consisting of various steps of temperature. The causes of discoloration and the characterization of solder joint were investigated with a degree of discoloration and the assembly process of OSP finished products, which was also compared statistically with that of conventional Ni/Au finished products. As the results, the solution of process trouble for OSP finished products is able to be offered.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.11 no.2
• /
• pp.33-36
• /
• 2002

As patients have concerned the esthetics of dental restorations, the porcelain fused to metal restorations have gain their popularity due to their strength and esthetic appearance for many years. However, metal collar in subgingival level of porcelain fused to metal restoration often causes black shadows. Inadequately positioned metal collar causes plaque depositions, gingival inflammations, black shadows, and discolorations of margin area. Those problems can be avoided by a clear finishing line, well-fabricated provisional restorations with precise margin and fine polishing, collarless porcelain fused to metal restoration, and all ceramic restoration. In this case report, collarless porcelain fused to metal restoration was used to treat cervical discoloration from old restorations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.123-141
• /
• 1989

The purpose of this study was to investigate the tendency of color change of ceramic, and its mechanism un der the influence of Pd-Ag alloy. The specimens were made by firing porcelain on tile metal plates cast with Au-Pt alloy, Pd-Cu alloy and Pd-Ag alloy. In the case of Pd-Ag alloy, specimens were fired under three different conditions as follows, 1) without protection, 2) protection with ceramic metal conditioner, 3) protection with carbon block. For the specimens of element analysis, a barrier was constructed with platinum foil between metal plate and ceramic. Color change was measured with colorimeter and elemental changes in ceramic were calculated with DC argon plasma emission spectrophotometer. The results were as follows : 1. Color change of ceramic by Pd-Ag alloy was negligible in hue, but decreased in value and increased in chroma (yellow discoloration). 2. Color change of ceramic by Pd-Ag alloy was appeared through vapor transport mechanism. 3. As the protection method for the color change of ceramic by Pd-Ag alloy, application of ceramic metal conditioner was superior to utilization of carbon block.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.843-848
• /
• 2017

Metal exposed to high temperature/high pressure/oxidizer-rich environment may cause rapid oxidation(ignition and combustion). In this study, a DC power supply test system that controls the temperature of specimen by supplying power to the specimen was constructed and after simulating the high temperature/stagnation/oxidizer-rich environment, the metal oxidation and ignition of STS series metal materials were evaluated. As a result, we was confirmed that the deformation (discoloration) of the selected material, the change in the surface roughness and the peeling of the metal surface were observed, and that the weight and the specimen thickness were changed. The most oxidized specimen was STS 304 and the less oxidized specimen was XM-19.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.210-215
• /
• 2012

Some patients with generalized attrition and teeth discoloration may want their anterior teeth to be treated just for esthetic improvement. Ameologenesis imperfecta, however, should be considered for such patients prior to any treatment with thorough clinical and radiographic examination. If a patient is diagnosed with amelogenesis imperfecta, the treatment on anterior teeth just for esthetic purpose is not advisable. In this case, a young man with amelogenesis imperfecta was treated with metal-ceramic restorations. The patient had generalized attrition, teeth discoloration, crown fracture, and cross-bite on the left teeth. The ultimate objective of this treatment was to enhance esthetics and masticatory function. The cross-bite on the left anterior teeth was treated with restorations, whereas the reverse horizontal overlap was maintained on the posterior. The patient was satisfied with the result esthetically and functionally, and the third month recall examination revealed no pathologic changes associated with the treatment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.923-927
• /
• 2017

Metal exposed to high temperature/high pressure/oxidizer-rich environment may cause rapid oxidation(ignition and combustion). Therefore, this study was performed for the selection of metal appropriate for high temperature/high pressure/oxidizer-rich environment. In order to make the high temperature, high pressure and oxidizer-rich environment, the test facility utilizing the catalytic reaction of hydrogen peroxide was constructed and the metal oxidation and ignition of the STS series metals were evaluated. The result showed that the change of the selected material (discoloration) and the surface roughness were observed, but the change in the weight and thickness of the specimen was not significant.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.9-20
• /
• 2003

Using a nickel-chrome casting alloy called 'Rexillium V' which is also available as base metal alloy for dental ceramic crown, 4 types of mixtures(A, B, C, D) with old and new metal were prepared for cyclic casting. The results of cyclic casting can be outlined as follows: 1. For Vickers hardness after casting, specimen A and D tended to have lower hardness in the course of cyclic casting, while specimen B and C tended to higher hardness. 2. The results of X-ray diffraction analysis showed that major crystal phase contained nickelchrome compounds and carbide. 3. The observation results of SEM photographs after cyclic casting show that there was a significant tendency to have similar structures among experimental groups. 4. The results of EDX analysis after cyclic casting showed that there were little differences in chemical composition between parent metal and base metal alloy. Although industrial nickel-chrome cast alloy did not show any significant change in material properties even through cyclic casting over several times, it is recommended that more there be more in-depth studies on how to detect any potential corrosion, discoloration and toxication of dental ceramic crown implanted in patient's oral cavity.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.659-666
• /
• 2016

Effect of color is to the human in modern society, has become an important element from the mental psychological aspects. Color is to heal the dry emotion directed the feelings and emotions that occur in the message visually the human mind, the environment plays a role that will enhance the value of life in accordance with the color that has been expressed. In this study, the metal jewelry on the sides to eliminate monotonous color expression of the metal using a Ottchil and Porcelaine 150 paint by applying the method of representing, it shows changes in various colors. Chapter and comparative analysis to produce a metal piece of Ottchil and Porcelaine 150 paint. It was derived as a result of the defect. Advantage is a method in combination of this, in comparison with the general method of metal color expression, were able to variously express color effect, since the role of the surface coating, to prevent the vessels discoloration the variable problems can give complemented on. The disadvantage is, Ottchil appears Ottchil up phenomenon by constitution, Porcelaine 150 paint, when used in the dishes in the chemical composition, can be harmful to health. To apply to work in the this reference, trying to contribute to the practicality of implementation and artistry.