• Title/Summary/Keyword: metal contamination

Search Result 696, Processing Time 0.024 seconds

Status Analysis of Adulterated Herbal Medicine (국내외 위변조 한약 현황 분석)

  • Lee, Soojin
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.34 no.5
    • /
    • pp.215-221
    • /
    • 2020
  • Adulterated herbal medicine is intentionally added with undeclared improper or inferior ingredients which should not be in herbal medicine. The contamination with potentially hazardous substances such as heavy metal, pesticides, fungus, and microorganism sometimes can be regarded as one of adulteration in a broad sense. The problem of adulteration is that adulterated herbal medicine shows poor quality and/or can cause adverse events. Therefore, it is important to control adulteration issues for quality assurance and qualitative improvement of herbal medicines. This study aims to summarize and make a reference how to control adulterated herbal medicine. In this process, this study is to investigate studies about adulterated herbal medicine via searching Korean and foreign electronic databases such as PubMed, NDSL and OASIS. Finally eighteen papers were included to this study and analyzed according to the type of study, the category and efficacy of adulterants, the type of analysis methodologies and possible adverse events of adulterants. Phosphodiesterase type 5 (PDE-5) inhibitors for male sexual enhancement and anorexic, laxative, diuretic agents for weight loss and treating obesity has been used frequently as adulterants. The range of adverse event caused by adulterated herbal medicine were very wide from mild symptoms such as diarrhea, constipation, dizziness and blurred vision to very severe symptoms such as heart failure, hypoglycemia and renal impairment. This study showed the recent trend on the research of adulterated herbal medicine and this will be the ground to develop more detailed systems to control adulterated herbal medicine.

Study on the effect of long-term high temperature irradiation on TRISO fuel

  • Shaimerdenov, Asset;Gizatulin, Shamil;Dyussambayev, Daulet;Askerbekov, Saulet;Ueta, Shohei;Aihara, Jun;Shibata, Taiju;Sakaba, Nariaki
    • Nuclear Engineering and Technology
    • /
    • v.54 no.8
    • /
    • pp.2792-2800
    • /
    • 2022
  • In the core of the WWR-K reactor, a long-term irradiation of tristructural isotopic (TRISO)-coated fuel particles (CFPs) with a UO2 kernel was carried out under high-temperature gas-cooled reactor (HTGR)-like operating conditions. The temperature of this TRISO fuel during irradiation varied in the range of 950-1100 ℃. A fission per initial metal atom (FIMA) of uranium burnup of 9.9% was reached. The release of gaseous fission products was measured in-pile. The release-to-birth ratio (R/B) for the fission product isotopes was calculated. Aspects of fuel safety while achieving deep fuel burnup are important and relevant, including maintaining the integrity of the fuel coatings. The main mechanisms of fuel failure are kernel migration, silicon carbide corrosion by palladium, and gas pressure increase inside the CFP. The formation of gaseous fission products and carbon monoxide leads to an increase in the internal pressure in the CFP, which is a dominant failure mechanism of the coatings under this level of burnup. Irradiated fuel compacts were subjected to electric dissociation to isolate the CFPs from the fuel compacts. In addition, nondestructive methods, such as X-ray radiography and gamma spectrometry, were used. The predicted R/B ratio was evaluated using the fission gas release model developed in the high-temperature test reactor (HTTR) project. In the model, both the through-coatings of failed CFPs and as-fabricated uranium contamination were assumed to be sources of the fission gas. The obtained R/B ratio for gaseous fission products allows the finalization and validation of the model for the release of fission products from the CFPs and fuel compacts. The success of the integrity of TRISO fuel irradiated at approximately 9.9% FIMA was demonstrated. A low fuel failure fraction and R/B ratios indicated good performance and reliability of the studied TRISO fuel.

Investigation on the Leaching Potential of Water-Soluble Metals from Bottom Ashes in Coal-fired Power Plants (화력발전소 바닥재의 수용성 금속이온 용출가능성 조사)

  • Seo, Hyosik;Koh, Dong-Chan;Choi, Hanna
    • Journal of Soil and Groundwater Environment
    • /
    • v.27 no.1
    • /
    • pp.39-49
    • /
    • 2022
  • Bottom ash generated from thermal power plants is mainly disposed in landfills, from which metals may be leached by infiltrating water. To evaluate the effect of metals in leachate on soil and groundwater, we characterized bottom ash generated from burning cokes, bituminous coal, the mixture of bituminous coal and wood pellets, and charcoal powder. The bottom ash of charcoal powder had a relatively large particle size, and its wood texture was well-preserved from SEM observation. The bottom ash of charcoal powder and wood pellets had relatively high K concentration from total element analysis. The eluates of the bottom ash samples had appreciable concentrations of Ca, Al, Fe, SO4, and NO3, but they were not a significant throughout the batch test. Therefore, it is considered that there is low possibility of soil and groundwater contamination due to leaching of metal ions and anions from these bottom ash in landfills. To estimate the trend of various trace elements, long-term monitoring and additional analysis need to be performed while considering the site conditions, because they readily adsorb on soil and aquifer substances.

Scientific Conservation of Underwood Typewriter(Hangi6863) in National Hangeul Museum (국립한글박물관 소장 언더우드 영문 타자기(한기6863)의 과학적 보존)

  • Kim, Yu Jin;Chung, Kwang Yong
    • Conservation Science in Museum
    • /
    • v.28
    • /
    • pp.1-16
    • /
    • 2022
  • Treatment was performed to conserve the Underwood Typewriter (Hangi 6863) from the collection of the National Hangeul Museum. Since the typewriter was presumably manufactured in the modern or contemporary era and bore patterns of damage such as component loss, corrosion, and paint loss, as well as being made of multiple materials, a condition survey and a scientific analysis were conducted ahead of the conservation treatment in order to carry out appropriate treatments for each material. The analysis confirmed that the typewriter was made of various materials including metal, paint, and rubber, and the conservation treatment was performed in the sequence of removal of contamination, reinforcement, and restoration under conditions where each material was stable. Conservation treatment was completed in a stable state by strengthening the layer of damaged paint and restoring the lost leg. These processes have enabled a better understanding of the materials and characteristics of typewriters manufactured in the early modern era, which is expected to provide basic data for typewriter conservation research to be conducted in the future.

Trace Metal Distribution and Ecological Risk Assessment in Marine Sediments from the Southeast Coastal Areas of Korea (남동해 연안 퇴적물 내 미량금속 분포 및 생태위해도 평가)

  • Dong-Woon Hwang;Minkyu Choi;Jae-Hyun Lim;In-Seok Lee;Garam Lee;Sujin Na
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.56 no.4
    • /
    • pp.438-448
    • /
    • 2023
  • The concentrations of trace metals and organic matters in marine sediments collected from southeast Korean coastal areas were investigated. The primary purpose of this study was to evaluate the contamination status, spatial distribution and potential ecological risks associated with the physiochemical composition in the studied areas. We found that the concentrations of trace metals in marine sediments were as follows: Fe > Mn > Zn > Cr > Pb > Cu > As > Cd > Hg. According to the sediment quality guidelines (SQGs) of Korea, concentrations of Zn, Cr, Cu and Cd at all sampling sites were below threshold effect levels (TEL). However, concentrations of As, Hg, and Pb (i.e., at the 94-98% of sampling sites), were below the TEL. In addition, concentration factors (CF) in the surveyed area were found to be associated with low ecological risks, whereas As, Hg, and Cu showed moderate to high risk levels in some inner parts of the studied bays. Finally, the pollution load index (PLI) and ecological risk index (ERI) of the elucidated metals were linked to moderate ecological risk, pointing to the possibility of being deleterious to some benthic organisms.

Material Life Cycle Assessments on Mg2NiHx-CaO Composites (Mg2NiHx-CaO 수소 저장 복합물질의 물질 전과정 평가)

  • HWANG, JUNE-HYEON;SHIN, HYO-WON;HONG, TAE-WHAN
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.33 no.1
    • /
    • pp.8-18
    • /
    • 2022
  • With rapid industrialization and population growth, fossil fuel use has increased, which has a significant impact on the environment. Hydrogen does not cause contamination in the energy production process, so it seems to be a solution, but it is essential to find an appropriate storage method due to its low efficiency. In this study, Mg-based alloys capable of ensuring safety and high volume and hydrogen storage density per weight was studied, and Mg2NiHx synthesized with Ni capable of improving hydrogenation kinetics. In addition, in order to improve thermal stability, a hydrogen storage composite material synthesized with CaO was synthesized to analyze the change in hydrogenation reaction. In order to analyze the changes in the metallurgical properties of the materials through the process, XRD, SEM, BET, etc. were conducted, and hydrogenation behavior was confirmed by TGA and hydrogenation kinetics analysis. In addition, in order to evaluate the impact of the process on the environment, the environmental impact was evaluated through "Material Life Cycle Assessments" based on CML 2001 and EI99' methodologies, and compared and analyzed with previous studies. As a result, the synthesis of CaO caused additional power consumption, which had a significant impact on global warming, and further research is required to improve this.

A Study on Residual Stress Reduction Effect of Cold Spray Coating to Improve Stress Corrosion Cracking of Stainless Steel 304L and 316L Welds (STS304L 및 STS316L 용접부의 응력 부식 균열 개선을 위한 저온 분사 코팅의 잔류 응력 감소 효과에 대한 연구)

  • Kwang Yong Park;Deog Nam Shim;Jong Moon Ha;Sang Dong Lee;Sung Woo Cho
    • Transactions of the Korean Society of Pressure Vessels and Piping
    • /
    • v.19 no.2
    • /
    • pp.102-108
    • /
    • 2023
  • A Chloride-induced stress corrosion cracking (CISCC) of austenite stainless steel in dry cask storage system (DCSS) can occur with extending service time than originally designed. Cold spray coating (CSC) not only form a very dense microstructure that can protect from corrosive environments, but also can generate compressive stress on the surface. This characteristic of CSC process is very helpful to increase the resistance for CISCC. CSC with several powders, such as 304L, 316L and Ni can be optimized to form very dense coating layer. In addition, the impact energy generated as the CSC powder collides with the surface of base metal at a speed of Mach 2 or more can remove the residual tensile stress of welding area and serve the compress stress. CSC layers include no oxidation and no contamination with under 0.2% porosity, which is enough to protect from the penetration of corrosive chloride. Therefore, the CSC coating layer can be accompanied by a function that can be disconnected from the corrosive environment and an effect of improving the residual stress that causes CISCC, so the canister's CISCC resistance can be increased.

Assessment of Environmental Pollution in Korean Stream Sediments by Chemical Analyses and Insect Immune Biomarkers

  • Ryoo, Keon-Sang;Byun, Sang-Hyuk;Hong, Yong-Pyo;Cho, Ki-Jong;Bae, Yeon-Jae;Kim, Yong-Gyun
    • Korean Journal of Environmental Biology
    • /
    • v.26 no.4
    • /
    • pp.330-342
    • /
    • 2008
  • A comprehensive quality survey for PCDDs/PCDFs and coplanar PCBs as well as heavy metals (Cu, Zn, Cd and Pb) in sediments has been investigated in August 2006, Korea. Monitoring was undertaken at five streams representing different surrounding environments throughout Juwang and Gapyeong streams (reference sites), Jungrang stream (dense population site), Ansan stream (mixed small population and industrial site), and Siheung stream (heavy industrial site). The levels of heavy metal in samples were found to be significantly higher in sediment from Siheung stream compared to those of other stream sites. The heavy metal concentrations (dry weight basis) in sediment from Siheung stream were as follows; Cd (3.7 ${\mu}g$/g), Pb (1,295 ${\mu}g$/g), Cu (713.4 ${\mu}g$/g) and Zn (358.1 ${\mu}g$/g). Among 12 coplanar PCBs and 17 PCDDs/PCDFs selected as target compounds in this study, PCB (IUPAC no. 118) and OCDD were the most abundant congeners found in all sediment samples, followed by 1,2,3,4,6,7,8-HpCDD, OCDF and 1,2,3,4,6,7,8HpCDF as well as PCB (IUPAC no. 105). These results were shown to be in the same trend as the sediment samples of other countries. The levels of PCDDs/PCDFs/coplanar PCBs in sediment samples were expressed as concentrations and WHO- TEQ values. The PCDDs/PCDFs/coplanar PCBs concentrations and their WHO-TEQ values in sediment from Siheung stream were remarkably high. The levels detected were 788.16 pg/g and 36.080 pg WHO-TEQ/g dry weight for PCDDs/ PCDFs and 314 pg/g and 0.4189 pg WHO-TEQ/g dry weight for coplanar PCBs, respectively, beyond the safety level of sediment value 20 pg WHO-TEQ/g. Sediment samples of the five streams were also monitored by sensitive biomarkers using insect immune responses: hemocyte-spreading behavior and immune-associated enzyme activities of phospholipase A$_2$ (PLA$_2$) and phenoloxidase. Organic extracts of Siheung and Jungrang sediments significantly interfered with the hemocytespreading behavior, whereas those of Ansan, Gapyeong, and Juwang did not. These organic extracts did not inhibit the PLA$_2$ and phenoloxidase activities. However, phenoloxidase was highly susceptible to exposure to aqueous extracts in all site sediments. In comparison, PLA$_2$ activities of the hemocytes were significantly inhibited only by aqueous extracts of Siheung, Jungrang, and Gapyeong sediments, but not by those of Ansan and Juwang. Despite some disparity between bioand chemical monitoring results, the biomarkers can be recommended as a device warning the contamination of biohazard environmental chemicals because of a fast and inexpensive detection method.

A geochemical study on the metal contamination of groundwater in Taegu City (대구시 지하수의 금속 오염에 대한 지화학적 연구)

  • 이재영;김영기;이진국;서정율
    • The Journal of Engineering Geology
    • /
    • v.2 no.2
    • /
    • pp.173-200
    • /
    • 1992
  • The quality of groundwater in the central part of Taegu City is influenced by upstreams of Sin-stream and Beomeo-stream because the stream waters are main source of the groundwater, and chemical composition of the upstream waters has close relationship with andesite and monzonite in the igneous rock terrain. The pH of upstreams are weak acid ~ neutral in the igneous rock area and weak alkaline in the sedimentary rock area. Contents of $Ca^{2+}$ and $Mg^{2+}$ in the streams are apparently high, and $Na^{+}$ content is only slightly high in the sedimentary rock area. But $K^{+}$ content is lower in the Panyaweol formation area than in the monzonite area. The contents of heavy metals and $N0_3^{-}$ are also higher in the sedimentary rock area of residential sections and industrial complexes than those in the igneous rock area. The groundwater is contaminated in comparison to the upstream water of the igneous rock areas, and there are some differences in pollution level between the Panyaweol formation area of residential sections and the Haman formation area of industrial complexes. K, Na, Ca, Mg, Cl, $SO_4$ and $NO_3$ contents in the Haman formation area are relatively higher than those in the Panyaweol formation area. But pH is nearly equal in the two areas. The content of heavy metal ions is still lower than the drinking water standard of Korea and only slightly differs in the two sedimentary rock areas. But the groundwater in the Haman formation area is considerably contaminated by Kongdanstream and Dalseo-stream.

  • PDF

Hydrogeochemistry and Contamination of Meteoric Water at the Narim Mine Creek, Korea (나림광산 수계에 분포하는 순환수의 수문지구화학 및 오염)

  • 이찬희
    • Economic and Environmental Geology
    • /
    • v.32 no.4
    • /
    • pp.385-398
    • /
    • 1999
  • The Narim gold mine is located approimately 200km southeast of Seoul within the Muju mineralized district of the Sobaegsan gneiss complex, Korea. Environmental geochemistry were undertaken for various kinds of water (surface, ground and mine water) collected of April, September and November in 1998 from the narim mine creek. Hydrogeochemical compositions of water samples are characterized by the relatively significant enrichment of Na+K, alkali ions, $HCO_{3}$, $NO_{3}$, Cl and F in groundwater, wheras the mine and surface waters are relatively enriched in Ca+Mg, hea표 metals and $SO_{4}$. Therefore, the groundwaters belong to the (Na+Ca)-( $HCO_{3}+SO_{4}$) type, respectively. The pH and EC values of the non-mining creek surfers are relatively lower compared with those of the surface water of the mine and ore dump area. The d values ($\delta$D-8$\delta^{18}$O) of all kinds of water from the Narim mine creek are 5.8 to 13.1 The range of $\delta$D and $\delta^{18}$O values (relative to SMOW) are shown in distinct two groups as follows: for the April waters of -64.8 to -67.8$\textperthousand$ and -9.6 to -10.0$\textperthousand$(d value=10.1 to 13.1), and for the November waters of -65.9 to -70.2$\textperthousand$ and -9.3 to -9.6$\textperthousand$ (d value=5.8 to 7.9), respectively. This range variation indicates that two group water were composed of distinct waters with seasonal difference. Geochemical modeling showed that mostly toxic metals (As, Fe, Mn, Ni, Pb, Zn) may exist largery in the from of metal $(M2^+)$ and metal-sulfate $(MSO_4\;^{2-$\mid$),\; and \;SO_4^{2-$\mid$}$ concentration influenced the speciation of heavy metals in the meteoric water. These metals in the groundwater could be formed of $CO_3 \;and \;(OH)_3$ complex ions. Using computer program, saturation index of albite, calcite, dolomite in meteoric water show undersaturated and progreddively evolved toward the saturation state, however, ground and mine water are nearly saturated. The gibbsited water-mineral reaction and stabilities suggest that the weathering of silicate minerals may be stable kaolinite, illite and Nasmectite. The clay minerals will be transformed to more stable kaolinite owing to the contiunous reaction.

  • PDF