• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.705-711
• /
• 2012

The purpose of this study is to develop the model to estimate the penetration rate of metal under a high power continuous wave laser irradiation. To estimate it, an empirical modeling is more practical when the penetration phenomena of metal by laser irradiation is too complex to be analyzed by the numerical simulation. When several methods published earlier were applied to our results, we found out that their methods were not appropriate as the model. Therefore, we suggested the new empirical method considering effective intensity as a key variable. As a result, we confirmed that the new method was effective to model the penetration rate of SUS304 metal and expected that it could be available to other metals.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.925-929
• /
• 2005

Some new metal(II) complexes, $M^{II}L_2$ [M = Mn (1), Co (2), Ni (3), Cu (4), and Zn (5)] of 2-acetylpyridine benzoylhydrazone ligand (HL) containing trifunctional NNO-donor system have been synthesized and crystallographically characterized for the complex 1 and 5. The complexes consist of two ligands to give sixcoordinate, which are bonded to the metal atom on a meridional plane through acetylpyridine ring nitrogen, azomethine nitrogen, and benzoyl oxygen atoms, respectively. The coordination geometry for other complexes was identified on the basis of the physicochemical data by elemental analyses, FAB -MS, IR, $^1H$ NMR, and electronic spectral measurements. The resulting data indicated that the complexes are accordance with the above formulation.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.6
• /
• pp.692-696
• /
• 1993

Prediction of retention times in transition metal-mandelate and transition metal-tartrate complex systems were studied on the cation exchanger. Plots of k' vs [mandelate] and k' vs [tartrate] were obtained under the condition of a constant competing cation concentration. The equation to predict the retention time of transition metal ion was derived from the ion exchange equilibria. Individual capacity factors (${k_1}',\;{k_2}'$) and stability constants ($K_1,\;K_2$) of the complexes were calculated from the non-linear least square method. Good resolution of the transition metals was predicted by the stepwise equation in the gradient method. The values of retention times from the calculation and the experiment agreed well each other.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1341-1345
• /
• 2011

A novel ruthenium(II) complex, [$RuCl_2(DMSO)_2$(PhenTPy)] has been synthesized by the condensation of $RuCl_2(DMSO)_4$ with (1-(1,10-phenanthrolinyl)-2,5-di(2-thienyl)-1H-pyrrole)[PhenTPy] in $CHCl_3$ solution. The [$RuCl_2(DMSO)_2$(PhenTPy)] complex modified electrode was fabricated through the electropolymerization of the monomer in a 0.1 M tetrabutylammonium perchlorate (TBAP)/$CH_2Cl_2$ solution, to take advantage of the electronic communication between metal ion center by the conjugated backbone. The UV-visible spectroscopy (UV), mass spectrometry (MS), and cyclic voltammetry (CV) were employed to characterize the [$RuCl_2(DMSO)_2$(PhenTPy)] complex and its polymer (poly-Ru(II)Phen complex). The poly-Ru(II)Phen complex modified electrode exhibited an electrocatalytic activity to the oxidation of acetaminophen and the catalytic property was used for the analysis of acetaminophen at the concentration range between 0.09 and 0.01 mM in a phosphate buffer solution (pH 7.0).

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.84-91
• /
• 2005

수소저장기술은 수소경제를 달성하기 위해 개발해야할 핵실요소기술이다. 이 논문에서는 고체수소저장기술의 최신 개발 동향을 고찰하였다. 나노구조 탄소계 물질(nanostructured carbon materials), 유기금속구조물(metal organic framework, MOFs), 금속수소화물(metal hydrides), 클래스레이트수화물(clathrate hydrates), 금속착수소화물(complex chemical hydrides)과 같은 고체수소저장매체를 중점적으로 고찰하였다. 그 결과 지금까지 개발된 고체수소저장재료의 수소저장용량은 고체의 표면적에 비례하여 증가함을 알 수 있었다. 탄소나노튜브의 수소저장 메커니즘을 연구하여 탄소나노튜브의 표면적이 수소저장량을 증가시키는데 중요한 인자로 작용함을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.881-883
• /
• 1998

We fabricated IMI-O polymer containing imidazole group that can be form a complex structure between the monolayer and the metal ions at the air-water interface. Also, the monolayer behavior at the air-water interface and Langmuir-Blodget films by complexes formation have been investigated by $\pi$-A isotherms, Brewster Angle Microscopy and the scanning Maxwell-stress microscopy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1252-1254
• /
• 2005

Recently, PDP barrier ribs require the formation of complex structure so that they are usually formed by etching method. For producing the fine ribs structure, during the etching process the metal ions of matrix (glass) of barrier materials should be understood on the etching mechanism with etching condition. We analyzed the quantity of Pb, Si, and B ions from the etch solution as a function of etching time.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.289-294
• /
• 1988

This paper describes tbe design and implementation of the adaptive controller to maintain the glood weld quality in gas metal arc welding process. The weld torch travel speed and the surface temperature are taken, respectively, as an input and an output of the welding control system. Because of the very complex phenomena of the process, the input-output dynamic model was experimentally identified by AIC (Akiake Information Criterion). Based on the model structure, the explicit model reference adaptive controller is simulated in order to regulate the output tempernture to the desired level.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.160-168
• /
• 2000

Hydroforming is a metal forming process that enables circular metal tubes to be formed in to the parts with the complex cross section along the curved axial direction. Recently this hydroforming process is largely used for the production of the automotive parts. This paper presents the results of tube bending and hydroforming simulations in cases of the varying weld line positions of the tube. Ten cases of prebending and hydroforming simulations are carried out to find the optiaml weld line position.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.39-44
• /
• 1999

Hydroforming is a forming process enabling circular metal tubes to be produced in complex cross sections along curved axial paths With the availability of advanced machine design and control They offer advantages over stamped sheet metal in lower tooling cost and structural mass The technology is relatively new so that there is no large knowledge base to assist the fundamentals of tube hydroforming technology. The purpose of this paper is found that adaptive bending condition and contact condition for bended part has uniform thickness distribution.