• 대한화학회지
• /
• 제7권4호
• /
• pp.280-282
• /
• 1963

Spectrophotometry에 의한 몰比法, 運續變化法 및 傾科比法으로 chloroform phase에 存在하는 Fe(III)-cupferrate의 組成을 決定하였는데, 그 황化合物은 325m$\mu$에서와 385m$\mu$에서 모두 $FeCupf_3^인 化學式을 갖는 것이었다.

• 대한화학회지
• /
• 제35권2호
• /
• pp.135-141
• /
• 1991

N,N'-oxalylbis(salicylaldehyde hydrazone) (OBSH)과 Zn (II), Cd (II) 및 Pb(II) 이온들과의 착물 형성에 따르는 안정도상수를 DMSO 용액에서 폴라로그래피법으로 측정하였다. 안정도상수의 크기는 Cd(II) < Zn(II) < pb(II) 이온의 순서로 증가하였으며, 모든 중금속이온들의 OBSH 리간드와 매우 안정한 착물을 형성하였다. 안정도상수를 여러 온도에서 측정하여 엔탈피 및 엔트로피 변화를 구한 결과, 착물의 안정도에 많은 기여를 하고 있음을 알았다.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.115-120
• /
• 1995

Diazotization of 2-Amino-5-nitrophenol was Synthesized by the direct diazotization method. The diazonium salts are usually stabilized in the from of double salts. The double salts of zinc chloride are the Commonest, and the double salt method is Specially applicable to the yield-up of coupling. The azo dye(2-naphthol-1-(2'-diazo-5'-nitrophenol)) is Converted into a chromium Complex by heating($100^{\circ}C$) with chromic formate, and DMF. The removal of inorganic salts from dyestuffs was performed in DMF solvent. This effect was more pronounced. From these results, It was obtained to liquid dyestuffs of metal complex with High fastness and high adsorption.

• 약학회지
• /
• 제53권6호
• /
• pp.342-350
• /
• 2009

The interaction of cadmium (II) ion with quercetin and (+)-catechin was investigated in aqueous solution at various pH. The flavonoid/cadmium stochiometries for cadmium (II) binding to quercetin and (+)-catechin have been determined by UV-vis spectroscopy. 1 : 1 Cd (II)-Flavonoid complex had a maximum absorbance and showed the bathochromic shift of the long-wavelength band of the UV-vis spectra in the alkaline pH, that occurs upon complexation, due to a ligandto-metal charge transfer. These results suggest that Cd (II)-flavonoid complex has the optimal condition of chelation in 0.2 M $NH_3$ - 0.2 M $NH_4Cl$ (pH 8.0) solution.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.37-41
• /
• 2004

A new tridentate ligand incorporating a monoxime and thiosemi-carbozone moieties has been synthesized. Its copper(II), nickel(II) and palladium(II) complexes have been prepared and characteirzed by physical and spectral methods. Elemental analyses and spectroscopic data of the metal complexes are consistent with the formation of a mononuclear copper(II) complex and binuclear complex with both nickel(II) and palladium(II). In the copper(II) complex the fourth coordination site is occupied by nitrate ion. In the binculear complexes the fourth coordination site is occupied by the deprotonated oxime oxygen of the ligand coordinated to the other metal.

• 한국식품영양학회지
• /
• 제7권2호
• /
• pp.128-136
• /
• 1994

Mackerel muscle protein hydrolysates, which were prepared from defatted mackerel meal by proteases such as complex enzyme, alcalase, bromelain, pancrease, pepsin, w-chymotrypsin, trypsin and papain, were tested for the antioxidative action against linoleic acid. Among proteases tested, the hydrolysates obtained from the treatment of complex enzyme, bromelain and alcalase showed higher antioxidative effects. Also, the hydrolysates showed the synergistic effects with o-tocopherol and the inhibitory effects for peroxidation of metal ions(Fe3+, Cua+) From the profiles of fractionation of the hydrolysates with Bio-gel P-2 column, the most active fractions, part I(complex enzyme-derived) and part e(bromelain-derived), had below MW 1,400 and the antioxidative effects were closely related to the binding capacity with metal ion(Cua+). Amno acid composition of the part I was abundant in histidine, arginine, phenylalanine and lysine, and the part e was abundant in lysine, glutamic acid and leucine.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.80-85
• /
• 2021

In the fourth industrial revolution, the demand for metal three-dimensional (3D) printing technology is rapidly increasing. Metal 3D printing is an efficient method for manufacturing products because the method reduces material waste compared to subtractive manufacturing. In addition, products with complex shapes, such as turbine blades, can be easily produced using metal 3D printing because the method offers a high degree of freedom. However, due to the long production time of metal 3D printing, mass production is impossible, and post-processing is necessary due to its low precision. Therefore, it is necessary to develop a new hybrid process that can efficiently process metals and to develop a metal 3D-printing-based hybrid processing system technology to secure high processing precision and manufacture complex shapes. In this study, the structural stability of a metal 3D printer based hybrid machining center was analyzed through structural analysis before its development. In addition, we proposed a design modification that can reduce the weight and increase the stiffness of the hybrid machining center by performing shape lightning based on the structural analysis results.

• Bulletin of the Korean Chemical Society
• /
• 제7권5호
• /
• pp.334-337
• /
• 1986

The preparation of the metal-metal bonded complex $Cp_2ZrClFeCp(CO)_2$ has been achieved by the reaction of $Cp_2ZrCl_2$ and strong nucleophile $NaFeCp(CO)_2$. The more soluble metal-metal bonded complexes $Cp_2ZrRFeCp(CO)_2(R=CH_3,\;n-C_8H_{17}$) have also been prepared through the reaction of Cp$_{2}$ZrRCl and NaCpFe(CO)$_{2}$. The complexes were characterized by IR, Raman, $^{1}$H NMR and Mass spectra. The complete absorption (100-3800 cm$^{-1}$) spectra for the three metal-metal bonded molecules are reported and the bands of each vibration were assigned.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.202-204
• /
• 2010

• 약학회지
• /
• 제13권2_3호
• /
• pp.97-100
• /
• 1969

As a part of an effort to find a relationship between metal chelation and its chemotherapeutic activity change for sulfa drugs, Sulfadimethoxine, Sulfamerazine Sulfamethoxy-pyridazine-Cu(II) complex compounds were studied through IR spectra.