• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.117-121
• /
• 2002

In this paper, the proper manufacturing method to the use of Illite with many application was studied. We confirmed merit of manufacturing and forming according as respective temperature. The variety of crystallization and surface was confirmed by X-ray diffraction(XRD) analysis and SEM. Then, we performed the experiments such as a antibiosis, a heavy metal adsorption and a gas deodorizaton to confirm the function of Illite. As a result, the adsorption of gas decreased according as the heat treatment of Illite, but the ability of antibiosis wasn't changed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.354-354
• /
• 2000

In this paper, we would study the applicability of neural networks to the recognition process of Korean stenographic character image, applying the classification function, which is the greatest merit of those of neural networks applied to the various pans so far, to the stenographic character recognition, relatively simple classification work. Korean stenographic recognition algorithms, which recognize the characters by using some methods, have a quantitative problem that despite the simplicity of the structure, a lot of basic characters are impossible to classify into a type. They also have qualitative one that it is not easy to classify characters for the delicacy of the character forms. Even though this is the result of experiment under the limited environment of the basic characters, this shows the possibility that the stenographic characters can be recognized effectively by neural network system. In this system, we got 90.86% recognition rate as an average.

• 한국수산과학회지
• /
• 제52권6호
• /
• pp.702-708
• /
• 2019

The range resolution of echo sounders can be improved by enhancing the transducer bandwidth. We designed a bandpass matching network for expanding the bandwidth of a transducer by scaling in both impedance and frequency after transforming a lowpass network into a bandpass configuration for a third-order Bessel filter. We measured the effect of the Bessel matching network for a 50 kHz sandwich type transducer on the transmitting voltage response (TVR), receiving sensitivity (SRT) and figure of merit (FOM), using a chirp echo sounder system. Both the simulation and experimental results indicated that the transducer with a bandpass matching network was capable of producing a symmetrical acoustic output over a wider bandwidth (8.25 kHz) than was the transducer without a matching network (3.75 kHz). By implementing the Bessel matching network, we achieved a 120% bandwidth enhancement.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 춘계학술대회
• /
• pp.113-127
• /
• 2011

The information technology intensive society rapidly moves from manufacturing industry to information technology industry. This paradigm of Robot is depending on intelligent Robot instead of labor. The conventional Robot worked through environmental variation and shift of job. This Robot is unactively response to men's mandate. And, this Robot have had iterative jobs through manipulation of men. But, this intelligent Robot have new technology through society paradigm shift. The outstanding feature of this Robot is perception function and cognition, mobility and manipulation. The definition of original Robot means forceful and tedious, slavery job. This is from robota, robotnick of the Czech Republic. Karel Capek, a playwriter of the Czech Republic use of this letter at 'Rossum's Universal Robots. The service of U-Health is the fusion of Information Technology and Medical Service. The U-Health provides for doing about household's medical behavior. Conclusionally, the Chungbuk has merit on establishment of national consilience complex such as Medical Robot and U-Health.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1989-1992
• /
• 2009

Maintenance is classified preventive maintenance before performing equipment failure and corrective maintenance after performing equipment failure. In preventive maintenance, we may analyze the failure data to end from beginning of equipment and allocate maintenance method and calculate maintenance cycle quantitatively by the failure data analysis. So, it has a merit to reduce system maintenance cost and to operate effectively but, it require high cost in system introducing and continuous operation to end of system. In corrective maintenance, we may calculate MTTR(mean time to repair) quantitatively based on function failure time. it can be based on establishing maintenance system for operation efficiency. In this paper, we may reflect the MTTR for the onboard equipped in Tilting train to establish maintenance system for Tilting train operation efficiency.

• 한국분말재료학회지
• /
• 제5권1호
• /
• pp.50-56
• /
• 1998

A new process using rapid solidification (melt spinning method) followed by pressing and sintering was investigated to produce the n-type thermoelectric ribbons of 90% $Bi_2Te_3$+10% $Bi_2Se_3$ doped with $CdCl_2$. Quenched ribbons are very brittle and consisted of homogeneous $Bi_2Te_3-Bi_2Se_3$ pseudo-binary solid solutions. Property variations of the materials was investigated as a function of variables, such as dopant $CdCl_2$ quantity and sintering temperature. When the process parameters were optimized, the maximum figure of merit was $2.146{\times}10^{-3}K^{-1}$.

• 대한조선학회지
• /
• 제15권4호
• /
• pp.20-23
• /
• 1978

This paper describes newly developed part generation program on the basis of ACUTE. New program named as ASEP(Automatic Separation Program) has function to separate a contour defined by ACUTE into several parts and store them in the part file. The separation flow is as follows, (1) Basic Contour Generation using ACUTE (2) Separation Line Definition (3) Separation into several parts (4) Storing parts in the part file with their individual name The merit of ASEP is to reduce the number of input cards and to simplify input statements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3187-3188
• /
• 2000

Based on fuzzy control algorithm this paper constructed fuzzy controller for automated vehicles. For passenger's convenience especially comfortability controller need to reduce the frequency of input variable's changing. So we established membership functions for comfortability as well as speed following. It made possible to control comfortability directly. To demonstration the efficiency of fuzzy controller, we carried out simulation with a automobile's transfer function. Also we compared the difference of input variable. By comparing two controller's response, we can confirm the merit of fuzzy controller about comfortability. Fuzzy controller can reduce input changing frequency.

• 대한조선학회지
• /
• 제21권2호
• /
• pp.1-7
• /
• 1984

This paper is concerned with an optimum design study of containerships in preliminary stage by applying economic criteria. The Net Present Value Index (NPVI) and the Required Freight Rate(RFR) are used as measures of merit. Hooke & Jeeves direct search method and External Penalty Function method of Sequential Unconstrained Minimization Techniques(SUMT) are used for solving constrained nonlinear optimization problem. Sensitivity analysis is carried out to investigate the effect on the optimum solution due to change of values in some parameters such as crane capacity, load factor, oil price, ship speed and the ratio between loaded FEU and TEU.

• 설비공학논문집
• /
• 제12권2호
• /
• pp.189-199
• /
• 2000

This paper investigates the thermodynamic performance of latent heat thermal energy storage system using two phase change materials(2-PCM system). The thermodynamic merit of using 2-PCM is clear in terms of exergetic efficiency, which is substantially higher than that of 1-PCM system. Optimum phase change temperature to maximize the exergetic efficiency exists for each case. The heat transfer area ratio of high temperature storage unit, X, becomes another important parameter for 2-PCM system if the phase change temperatures of given materials are different from those of optimum conditions. It is a good approximation for X$_{opt}$ to be 0.5 when optimum phase change temperatures are used. Otherwise X$_{opt}$ is determined differently as a function of given phase change temperatures.res.