• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1615-1622
• /
• 2016

This research aims to develop a voyage performance monitoring system based on international standards. The developed system is equipped with an electronic navigational chart(ENC) that provides onshore and offshore information, as well as supports standardized interfaces with navigational equipment, such as a gyro compass, a differential global positioning system(DGPS), and an automatic identification system(AIS), to monitor the navigation route in real time. In addition, the proposed system adopts a car navigation system to provide a graphical user interface, an intuitive menu-driven configuration, and an easy guide for safer sea navigation. The system, interfaced with the gyro compass and DGPS, was verified without any data loss, and passed a test conducted under extreme conditions by the Korea Laboratory Accreditation Scheme(KOLAS). Finally, the system contributes to preventing collision of vessels and minimizing casualties by maximizing the convenience of mariners which a conventional system does not provide.

• Journal of Biomedical Engineering Research
• /
• v.13 no.2
• /
• pp.133-140
• /
• 1992

Bioelectrical Impedance method for measuring human body composition is based upon the principle that the electrical conductivity of the fat-free mass (FFM) is far greater than that of the (at. Deter- mination o( impedance was nlade in 30 healthy and obese men aged $40.9{\pm}14.7$yr (mean${\pm}$SD) and 25 healthy and obese women aged $44.0{\pm}10.2$ yr. A commercial impedance body fat analyzer was used with a four electrode arrangement that introduced a painless constant current(ImA at 50 kHz) into the body. Linear relationships were found between impudence values and FFM(r=-0.786) and between weight and FFM(r=0.837). Signigicant increases in the correlation coefficients were ob served when the predicator Hta/z was regressed against FFM(r=0.912) where Ht Is height and Z Is impedance. A linear regression equation, FFM=0.586(Htf/z) +0.317(Weight) -1.674(r=0.977), was found. The correlation coefficient of % body fat between the impedance and infrared methods was 0.898. These data Indicate that the bioelectrical impedance technique is a reliable and valld approach for the estimation of human body composition. This method Is safe, noninvasivr, prouides rapld measure menu, requires little operator skill and subject cooperation, and Os portable. Finally measurement of percent body fat was made possible using both the regression equation and a developed impedance measuring device which measures impedance between wrist and ankle.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.431-439
• /
• 2000

In this study, a GIS-application model to determine the optimal route of eco-friendly forest roads and to evaluate the environmental and engineering features of the route was developed. The model consists of five modules for managing spatial and attribute data, determining the optimal route for forest road projection, evaluating environmental and engineering efficiency of forest roads, analyzing characteristics of mountain terrains and report-writing. Using the pull-down menu system, these modules were integrated to be user-friendly for forest field practitioners. Visual Basic 6.0 and Avenue were used as the programming tool and the commercial GIS softwares, ArcView 3.1, Spatial Analyst and 3-D Analyst were used as the basic engine of the model for GIS analysis. In this paper, discussed are the principles for forest road projection and evaluation and structures and application features of the model.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.51-59
• /
• 2009

These days mobile phone which were used mainly by grown-up persons are now widely used among children as well due to new social demands. Despite this trend, existing mobile phones are still being designed and produced according to the taste of people in their 20s and 30s, even the elderly, not satisfying physical, emotional and cognitive characteristics raised by children. This study aimed to extract the design factors of mobile phones for children by reflecting functional factors requested by children and parents in QFD's customer demands. First, functional and design factors requested in mobile phones for children were extracted from existing products and documentary records and some functional factors were selected through a process of integration and omission. The survey research was conducted on children and parents, based on the selected functional factors. Based on the survey research, functional factors were analyzed using AHP, and key functional factors considered by children and parents in mobile phones for children were investigated. Finally, in order to reflect the results in QFD, the correlation between functional factors and design factors was constructed as HOQ through experts' evaluation. The results showed that both children and parents recognized the basic functions such as telephoning, text messaging and phone directory as high priority functional factors, even though the relative importance was different between children and parents. Therefore, it is likely to satisfy the desires of both children and parents by designing mobile phones for children in consideration of design factors such as menu depth, button independence and button arrangement. It is expected that this study will promote experiments on design factors and propose basic data for and guidelines to mobile phone design for children.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.2
• /
• pp.159-165
• /
• 2013

Objective: The aim of this study was to predict human performance time in finding objects on multi-display monitors using ACT-R cognitive architecture. Background: Display monitors are one of the representative interfaces for interaction between people and the system. Nowadays, the use of multi-display monitors is increasing so that it is necessary to research about the interaction between users and the system on multi-display monitors. Method: A cognitive model using ACT-R cognitive architecture was developed for the model-based evaluation on multi-display monitors. To develop the cognitive model, first, an experiment was performed to extract the latency about the where system of ACT-R. Then, a menu selection experiment was performed to develop a human performance model to find objects on multi-display monitors. The validation of the cognitive model was also carried out between the developed ACT-R model and empirical data. Results: As a result, no significant difference on performance time was found between the model and empirical data. Conclusion: The ACT-R cognitive architecture could be extended to model human behavior in the search of objects on multi-display monitors.. Application: This model can help predicting performance time for the model-based usability evaluation in the area of multi-display work environments.

• Spatial Information Research
• /
• v.15 no.4
• /
• pp.363-370
• /
• 2007

This study has been carried for the development of the basic algorithm of helicopter navigation system based on TRN (Terrain Referenced Navigation) with information input from the GPS. The helicopter determines flight path due to Origination-Destination analysis on the Cartesian coordinate system of 3-D DTM. This system shows 3-D mesh map and the O-D flight path profile for the pilot's acknowledgement of the terrain, at first. The system builds TCF (terrain clearance floor) far the buffer zone upon the surface of ground relief to avid the ground collision. If the helicopter enters to the buffer zone during navigation, the real-time warning message which commands to raise the body pops up using Matlab menu. While departing or landing, control of the height of the body is possible. At present, the information (x, y, z coordinates) from the GPS is assumed to be input into the system every 92.8 m of horizontal distance while navigating along flight path. DTM of 3" interval has been adopted from that which was provided by ChumSungDae Co., Ltd..

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.101-108
• /
• 2017

In existing public parcel locker, if there is not an empty storage box, it is not used. In existing private parcel locker, because it is a lock-based locker, there is strong weak point in security. To prevent these drawbacks, the proposed private parcel locker has a menu-driven remote control application which is operated on smartphone. The lock release and the security number change by the security number which is stored in the Electrically erasable read-only memory, are possible. As a result, the proposed method has better advantages than the existing methods in terms of unnecessariness of empty storage box check and security by the security number accumulation function and the automatic SMS transmission representing parcel locker operation result.

• Journal of Biomedical Engineering Research
• /
• v.11 no.2
• /
• pp.305-314
• /
• 1990

In this paper we have implemented and tested TPN which is system to supply sufficent nutrition to nutritionally deficient patient by means of ES (expert system) a kind of A.1 (artificial intelligence) . This system affords to evaluation of nutritional state of patient which is essential to physi- cian. who performs TPN, decision of performing TPN and management of patient-data & calculation of information needing to making TPN fluid. The features were as follolv 1. we input data, take ideal weight of patient and 24hr's creatlnln In urine according to chart in system compare TSF (triceps skin fold), MAC (mid-arm circumference), AMC (arm muscle circumference) to 5th, 15th, 50th percentile and evaluate the nutritional state of patient. 2. Calculation of protein & nonprotein calorie needing to treament of patient can be made exactly by stress factor, activity factor and body temperature. 3. patient's personal recording needing to management of patient date name of chief doc- tor, name of department of admission, chart number, history can by taken very easily. 4. The way of system operating is pull-down Menu one, It can be processing very efficiently. 5. Date processing in system, we can manage memory volume of computer verlr efficiently using of dynamic allocation variables. 6. We can make it very easy to edit & revise the input data, processed data is saved to diskette in 2 files (TDF, THF) , these are semipermanent preservation.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.167-174
• /
• 1993

Recently, stereotactic radiosurgery plan is required with the information of 3-D image and dose distribution. A project has been doing if developing LINAC based stereotactic radiosurgery since April 1991. The purpose of this research is to develop 3-D radiosurgery planning system using personal computer. The procedure of this research is based on two steps. The first step is to develop 3-D localization system, which input the image information of the patient, coordinate transformation, the position and shape of target, and patient contour into computer system using CT image and stereotactic frame. The second step is to develop 3-D dose planning system, which compute dose distribution on image plane, display on high resolution monitor both isodose distribution and patient image simultaneously and develop menu-driven planning system. This prototype of radiosurgery planning system was applied recently for several clinical cases. It was shown that our planning system is fast, accurate and efficient while making it possible to handle various kinds of image modalities such as angiography, CT and MRI. It makes it possible to develop general 3-D planning system using beam's eye view or CT simulation in radiation therapy in future.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.333-340
• /
• 1994

Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16 MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with two complete blood count analyzers (Sysmex WE-8000 and Coulter STKS) for unidirectional data transmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology.