• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.4
• /
• pp.115-120
• /
• 2011

Recently flash memory is widely used in various mobile devices as storage medium. Nonvolatile memory can be divided into two categories: NAND- and NOR-type flash memory. NOR flash memory is mainly used to store instruction codes for operation; while NAND for data storage. However, NAND does show more economical benefits, that is, it is approximately 30~40% cheaper than NOR flash. Therefore it can be useful to improve NAND flash performance by replacing NOR flash with NAND flash combining with various buffer systems.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.787-790
• /
• 2012

The objective of this research is to design a high-performance NAND flash memory system containing a buffer system. The proposed instruction buffer in the NAND flash memory consists of two parts, that is, a fully associative temporal buffer for temporal locality and a fully associative spatial buffer for spatial locality. A spatial buffer with a large fetching size turns out to be effective for serial instructions, and a temporal buffer with a small fetching size is devised for branch instructions. Simulation shows that the average memory access time of the proposed system is better than that of other buffer systems with four times more space. The average miss ratio is improved by about 70% compared with that of other buffer systems.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2010.05a
• /
• pp.13-17
• /
• 2010

Consciousness is really regarded as too ambiguous a concept to be understood and accepted as a mental construct without the inclusion of memory and attention in any conceptualization. However we need one criterion to count satisfactorily as an explanation of consciousness in information processing. An operational working definition of consciousness could be made in comparison of memory and attention: Consciousness would be a subjective awareness of momentary experience and also have the characteristics of an operating system performing control and consolidation information processing. This could be called a cognitive consciousness. It is possible that some distinctions between consciousness, memory and attention can be made conceptually and functionally from the perspectives of information processing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.46-49
• /
• 1994

In this paper we investigate the characteristics of switching and memory traps in sealed MONOS nonvolatile memory devices with different nitride thicknesses. We have demonttrated flatband voltage shift of 1V with 5V programming voltage. By fitting the experimental observations with theoretical calculations, trap density and capture cross section of memory trap at the nitride-blocking oxide interface are estimated to be 1.0${\times}$10$\^$13/ cm$\^$-2/ and 8.0${\times}$10$\^$14/ cm$\^$-2/

• Journal of the Korea Society for Simulation
• /
• v.12 no.4
• /
• pp.95-102
• /
• 2003

Stream servers are for supplying multimedia stream data to users through the internet such as movies and music without discontinuation. A typical stream server is designed roughly by considering the characteristics of stream services and by employing processors, memory, PCI bus, Ethernet, TOE and disks. This study focuses on deciding the priority for using resources such as PCI bus, buffer memory and TOE buffer, which have limited capacities in a typical stream server. When the priorities for using limited resources are not given properly, the stream servers may not even function as originally designed. The simulation study shows that the top priority for using PCI bus for normal streaming services should be given to the operation that sends data from buffer memory to TOE buffer. Giving priority for using PCI bus to other operation such as sending data from disks to memory results in a deadlock phenomenon.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.904-906
• /
• 2009

Organic field-effect transistor (OFET) memory is an emerging device for its potential to realize light-weight, low cost flexible charge storage media. Here we report on a solution-processed poly[9,9-dioctylfluorenyl-2,7-diyl]-co-(bithiophene)] (F8T2) nano floating-gate memory (NFGM) with top-gate/bottom-contact device configuration. A reversible shift in the threshold voltage ($V_{Th}$) and the reliable memory characteristics were achieved by incorporation of thin Au nanoparticles (NPs) as charge storage sites for negative electrons at the interface between polystyrene and cross-linked poly(4-vinylphenol).

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.28-33
• /
• 2014

Recently, the actuator worked by the driving recovery-force of the thermo elastic martensitic transformation of shape memory alloys(SMA) has been studied. This paper presents a study on the fatigue life of shape memory alloy (SMA) actuators undergoing thermally induced martensitic phase transformation under various stress levels. shape memory recoverable stress and strain of Ti-44.5at.%Ni-8at.%Cu alloys were by means of constant temperature tensile tests. Differential scanning calorimetry (DSC) was employed in order to investigate the transformation characteristics of the alloy before the tests. the results were summarized as follows. The martensite inducing stress incerased with the increasing of the Cu-contents. The fatigue life decreased with the increasing of the test load and the Cu-content. The data acquired will be very useful during the design process of an SMA NiTiCu element as a functional part of an actuator.

• Transactions of the Society of Information Storage Systems
• /
• v.11 no.2
• /
• pp.36-40
• /
• 2015

The demand for flexible devices including solar cells, memories and batteries has increased rapidly over the past decades. In most flexible devices, polymer-based materials are used to enable the mechanical deformations such as bending or folding. Shape Memory Polymers (SMPs) is a high molecular compound polymer with flexibility and shape recovery characteristics. In this work, flexible shape memory device was fabricated by simply coating the conducting material, carbon nano-tube (CNT), on a shape memory polymer. Furthermore, durability of the device under various type of mechanical deformations was assessed. It is believed that the result of this work will aid in realization of a stretchable and wearable electronic device for practical applications.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.67-74
• /
• 2003

Stream servers are for supplying multimedia stream data to users through the internet such as movies and musics without discontinuation. A typical stream server is designed roughly by considering the characteristics of stream services and by employing processors, memory, PCI bus, Ethernet, TOE and disks. This study focuses on deciding the priority for using resources such as PCI bus, buffer memory and TOE buffer, which have limited capacities in a typical stream server. The simulation study shows that the top priority for using PCI bus for normal streaming services should be given to the operation that sends data from buffer memory to TOE buffer Giving priority for using PCI bus to other operation such as sending data from disks to memory results in deadlock Phenomenon.

• Earthquakes and Structures
• /
• v.23 no.2
• /
• pp.207-219
• /
• 2022

Seismic response control has always been a grave concern with the damage and collapse of many buildings during the past earthquakes. While there are several existing techniques like base isolation, viscous damper, moment-resisting beam-column connections, tuned mass damper, etc., many of these are succumbing to either of large displacement, near-fault, and long-period earthquakes. Keeping this viewpoint, extensive research on the application of smart materials for seismic response control of buildings was attempted during the last decade. Shape Memory Alloy (SMA) with its unique properties of superelasticity and shape memory effect is one of the smart materials used for seismic control of buildings. In this paper, an exhaustive review has been compiled on the seismic control applications of SMA in buildings. Unique properties of SMA are discussed in detail and different phases of SMA along with crystal characteristics are illustrated. Consequently, various seismic control applications of SMA are discussed in terms of performance and compared with prevalent base isolators, bracings, beam-column connections, and tuned mass damper systems.