• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.1027-1044
• /
• 2017

Membrane penetration is the most important factor influencing the measurement of volume change for triaxial consolidated-drained shear test for coarse-grained soil. The effective pressure p, average particle size $d_{50}$, thickness $t_m$ and elastic modulus $E_m$ of membrane, contact area between membrane and soil $A_m$ as well as the initial void ratio e are the major factors influencing membrane penetration. According to the membrane deformation model given by Kramer and Sivaneswaran, an analytical solution of the membrane penetration considering the initial void ratio is deduced using the energy conservation law. The basic equations from theory of plates and shells and the elastic mechanics are employed during the derivation. To verify the presented solution, isotropic consolidation tests of a coarse-grained soil are performed by using the method of embedding different diameter of iron rods in the triaxial samples, and volume changes due to membrane penetration are obtained. The predictions from presented solution and previous analytical solutions are compared with the test results. It is found that the prediction from presented analytical solution agrees well with the test results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.141-148
• /
• 2009

The purpose of this paper is to propose a standard test methods of resistance to root penetration for waterproofing and rootproofing membrane using green roof system. Green roof system is considered to be an important subject in construction industry for green growth project. At the same time, we have to consider the counterplan for protection the damage of waterproofing layer and concrete substrate from the penetration of plant root. But many kinds of materials for protection from root penetration are using in construction field. But the performance of those materials is not clear, and there is not test methods for the evaluation of performance. So in this paper, based on the research results of 4 institutes during four years and foreign cases, we made a standard test methods of resistance to root penetration for waterproofing and rootproofing membrane using green roof system. This test method deals with about environmental condition of laboratory, experimental facilities, kinds of plant, specimen of test, management methods, evaluation duration and documents, etc.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.858-864
• /
• 2018

Graphene oxide (GO) laminate is a new promising material for water purification system, which has extraordinary permeability only for water molecule. It consists of numerous nano-channels, in which water molecules could be nano-confined, resulting in slip of the molecules for very fast transportation speed. In this study, water penetration rate via different thickness of GO membrane according to driven pressures are measured experimentally, so that speed of water molecules and permeability are evaluated. Generally, water penetration rate via a membrane with macroscopic-sized channel increases linearly with pressure difference between up and bottom side of the membrane, but that via GO membrane approaches asymptotic value (i.e. saturation) as like a log function. Moreover, the permeability of GO membrane was observed in inverse proportion to its thickness. Based on the experimental observations, a correlation for volume flux via GO membrane was suggested with respect to its thickness and external pressure difference.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.48-52
• /
• 2004

Diffusion/penetration rates of finishing agents are not a major criterion in the design of low molecular weight finishing agents. However, in the case of polymeric finishing agents, high molecular weights result in large hydrodynamic volumes and diffusion/penetration of the finishing agent into the substrate may become a critical factor in the design of textile finishing agents. Thus the effect of the molecular weight of a model compound, polyethylene glycol, on its diffusion through a cellulose membrane or cotton fabric is studied. Diffusion experiments of polyethylene glycol of molecular weight 400, 1000, 2000, 4600, 8000, and 10000 through cellulose membrane or fabric was carried out in a glass U-tube diffusion apparatus and the half penetration times and the penetration coefficients were determined. Both the half penetration times and the penetration coefficients exhibited a significant change between molecular weight 2000 and 2500 as the molecular weight of polyethylene glycol increased, suggesting that there is a critical molecular weight above which diffusion/penetration becomes difficult. Based on this study on a model compound, it is suggested that polymeric textile finishing agents can be expected to exhibit similar behavior.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.139-151
• /
• 2013

Understanding interactions between nanoparticles and lipid bilayer membranes is of great importance due to the potential applications in bio-nanotechnology such as drug deliveries, carrying genes, and utilization of integral membrane proteins. To investigate the dynamics of nanoparticle penetration and translocation into membranes, we performed dissipative particle dynamics simulations which use simple and intuitive coarse-grained models yet effectively describe hydrodynamic interactions in cell environment. We discuss the influence of the shape of nanoparticles as well as the properties of membranes including large membrane-embedded proteins that are found to significantly affect orientation of nanoparticles within membranes and, in turn, the minimum force required to translocate nanoparticles.

• Korean Journal of Metals and Materials
• /
• v.46 no.5
• /
• pp.296-303
• /
• 2008

Hydrogen permeation through dense palladium-based membranes has attracted the attention of many scientists largely due to their unmatched potential as hydrogen-selective membranes for membrane reactor applications. Although it is well known that the permeation mechanism of hydrogen through Pd involves various processes such as dissociative adsorption, transitions to and from the bulk Pd, diffusion within Pd, and recombinative desorption, it is still unclear which process mainly limits hydrogen permeation at a given temperature and hydrogen partial pressure. In this study, we report an all-electron density-functional theory study of hydrogen permeation through Pd membrane (using VASP code). Especially, we focus on the variation of the energy barrier of the penetration process from the surface to the bulk with hydrogen coverage, which means the large reduction of the fracture stress in the brittle crack propagation considering Griffith's criterion. It is also found that the penetration energy barrier from the surface to the bulk largely decreases so that it almost vanishes at the coverage 1.25, which means that the penetration process cannot be the rate determining process.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.103-116
• /
• 1996

This study was performed to observe the bacterial adhesion and penetration to e-PTFE membrane following guided tissue regeneration(GTR) procedure and to evaluate the association of the membrane exposure and bacterial contamination with the clinical outcome. For the study, ten infrabony defects in 9 patient were treated by mucoperiosteal flap operation including placement of the e-PTFE membrane. The treated teeth were monitored weekly for the membrane exposure, gingival recession and gingival inflammation. The membranes were retrieved after 4 to 6 weeks, examined by SEM for bacterial contamination and adherent connective tisue elements, and observed under LM for the bacterial penetration into membrane. Three months postsurgery, the defect sites were clinically reexamined for the changes in attachment level and probing depth. Comparison of the ultrastuctural findings and clinical outcome revealed that extent of membrane exposure and bacterial contamination of the membrane was inversely associated with clinical attachment gain. From this finding, the extent of membrane exposure and the bacterial contamination on the apical portion of the e-PTFE membrane at the time of removal seemed to be a critical determinant on the clinical outcome of GTR and the membrane exposure needs to be controlled for optimal results.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.19-43
• /
• 1997

The barrier membranes for GTR procedure could be affected bY bacterial contamination after exposure to oral environment. This study was done to evaluate whether the tetracycline impregnated barrier membranes could inhibit bacterial attachment and penetration into membranes. The resorbable membrane(polylactic and polyglycolide copolymer, $Resolute^{(R)}$, W.L Gore and Associates, Inc..USA) and the non-resorbable membrane(e-PTFE; Gore-TexTM, W.L. Gore & Associates, Inc.,USA) were cut into 4mm discs and trated with 5% tridodecylmethylammonium chloride solution in ethanol and dried in air. The membranes were immersed in tetracycline(TC) solution (100mg/ml, pH 8.0) and dried. To the maxillary canine-premolar region in six periodontally healthy volunteers, removable acrylic devices were inserted, on which 8 cylindrical chambers were glued with TC impregnated and non-impregnated discs, the membrane discs were examined for bacterial attachment and penetration, and structural changes under SEM and LM. From the 1st day to the 7th day, membranes showed bacterial plaque formation composed of cocci and rods. Thereafter, filamentous bacteria appeared and the plaque thickness increased. The TC impregnated e-PTFE membranes showed less bacterial attachment and delayed in bacterial plaque maturation than non-treated membranes. As for bacterial penetration, the TC impregnated e-PTFE membranes showed superficial invasion and infrequent presence of bacteria in unexposed inner surface at the 4th week. while the non-treated e-PTFE membranes showed deep bacterial invasion at the 2nd week and frequent presence of internal bacteria at the 4th week. The resorbable membranes started to be resorbed at the 2nd week and were perforated at the 4th week, regardless of TC treatment. In conclusion, bacterial plaque formation and penetration was efficiently delayed in TC impregnated e-PTFE membranes, whereas resorbable membranes were similar in bacterial invasion due to membrane degradation and perforation, regardless of TC treatment.

• YAKHAK HOEJI
• /
• v.38 no.4
• /
• pp.440-450
• /
• 1994

Due to the limited bioavailability of $[D-Ala^6]$LHRH from nonparenteral transmucosal sites of administration, enhancement of mucosal permeability by coadministration of several protease inhibitors and/or penetration enhancers were studied in rabbit mucosa. As a reliable bioassay method for $[D-Ala^6]$LHRH, ovulation-inducing effect were measured after vaginal administration in the rat. The permeation of $[D-Ala^6]$LHRH through the mucosal membrane of rabbit mounted on George-Grass diffusion cells were examined in the presence of polyoxyethylene 9-lauryl ether (POE), ${\beta}$-cyclodextrin$({\beta}-CyD)$ or ethylene diamine tetra acetate disodium salt(EDTA). The vaginal membrane showed higher permeability of $[D-Ala^6]$LHRH than the rectal and nasal membrane. POE and ${\beta}-CyD$ showed a small promoting effect on the membrane permeation of $[D-Ala^6]$LHRH, but EDTA showed significant enhancement. Ovaluation was enhanced by the coadministration of sodium laurate(0.5%), a protease inhibitor but was not enhanced by EDTA, a penetration enhancer. On the other hands, coadministration of sodium tauro 24,25 dihydrofusidate(1%) and EDTA(2%) enhanced the ovulation inducing-effect 2.8 times. These results suggest that the vaginal administration of $[D-Ala^6]$LHRH with STDHF or sodium laurate as a protease inhibitor, and EDTA as a penetration enhancer, may become an elective method for transmucosal delivery of $[D-Ala^6]$ LHRH.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.81.2-81.2
• /
• 2011

The gas diffusion layer (GDL) consists of two main parts, the GDL backing layer, called as a substrate and the micro porous layer (MPL) coated on the GDBL. In this process, carbon particles of MPL penetrates to the GDBL consequently forms MPL penetration part. In this study, the micro porous layer (MPL) penetration thickness is determined as a design parameter of the GDL which affect pore size distribution profile through the GDL inducing different mass transfer characteristics. The pore size distribution and water permeability characteristics of the GDL are investigated and the cell performance is evaluated under fully/low humidification conditions. Transient response and voltage instability are also studied. In addition, to determine the effects of MPL penetration on the degradation, the carbon corrosion stress test is conducted. The GDL that have deep MPL penetration thickness shows better performance in high current density region because of enhanced water management, however, loss of penetrated MPL parts is shown after aging and it induces worse water management characteristics.