• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.75-84
• /
• 2018

According to IHS, the overall display market is expected to grow at an average annual rate of 6% from $ 104 billion in 2016, to $ 138 billion in 2021. Among them, the OLED display panel will grow from $ 15 billion to $ 41 billion over the same period, forecasting a high annual growth rate of 22%. However, the refraction index, light leakage, bubble generation, adhesion deterioration, peeling phenomenon, moisture resistance, light transmittance, low turbidity. OCA (optically clear adhesive), which solves problems such as improving the resistance of the conductive film, is largely dependent on imported products. In addition, in 2016, the world market is worth KRW4.3 trillion, and the adhesive market has a large market effect. In this study, we tried to analyze the technical competitiveness of patent and thesis by classifying OCA (optically clear adhesive, optical adhesive) for display panel by curing method. As a result of the study, the amount of patents and papers in Korea was found to be superior to other competitors, but the quality level was low. In particular, it was found that the achievements of the papers in the hot melt field are lacking and the government should expand its support.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.137-150
• /
• 2023

This paper investigated the applicability of polyester yarn coating using ther- moplastic polyester elastomer (TPEE) to replace polyvinyl chloride (PVC) coated yarn for blinds fabric. For this purpose, suitable TPEE for yarn coating was selected by measuring thermal and rheological properties and the yarn coating process conditions were investigated by changing variables such as extrusion temperature, die and nipple dimensions, take-up speed, and core yarn denier. TPEE coated yarns with a diameter of 0.3 and 0.4 mm were prepared, respectively. Tensile properties and cross-section uniformity revealed by a scanning electron microscopy (SEM) of the TPEE coated yarn were analyzed. Among several candidates, TPEE having a melt index of 35 and melting temperature of 153℃ was the most suitable for replacing PVC, and the opti- mum coating conditions for the TPEE coating yarn were a head temperature of 170℃ and core yarn denier of 420 denier. The selected TPEE coated yarns have enough ten- sile strength and uniformity to replace present PVC coated yarns, certified by SEM photograph.

• 한국결정성장학회지
• /
• 제5권4호
• /
• pp.318-331
• /
• 1995

Hologen lamp를 열원으로 한 적외선 집중가열 방식의 Floating zone법을 이용하여 조화융해조성(48.6 mol% $Li_2O : 51.4 mol% LiNbO_3$)의 $LiNbO_3$ 단결정과 여기에 5 mol%의 MgO를 첨가한 $LiNbO_3$:5mod%MgO 단결정을 c-축으로 성장시켰다. 고품질의 광학용 $LiNbO_3$ 결정을 성장시키기 위해 원료봉의 최적 소결조건 및 성장 분위이게 따른 원료봉/융액 계면에 대한 고찰을 하였고, 이를 바탕으로 하여 ga s flow rate, pulling rate, 원료봉과 종자정의 회전속도 등에 대한 최적의 결정성장 조건을 확립하였다. 성장된 결정에 대해서 chemical etching을 통한 etch pattern과 ICP(Inductively Coupled Plasma) 분석을 통한 조성 변동 및 불순물 Fe 함량을 조사하였고, 5 mol% MgO의 첨가에 따른 투과율과 굴절율의 변화를 관찰하였다. 또한 $LiNbO_3$의 비선형 광학특성에 대해서는 측정한 굴절율 값을 data로 하여 비선형 광학 굴절율 $n_2$를 계산하여 다른 광학물질과 비교하였고, 이와 관련하여 비선형 광학특성에 대한 전반적인 고찰을 하였다.

• 한국식품과학회지
• /
• 제29권5호
• /
• pp.947-954
• /
• 1997

옥수수가루에 건조유제품을 첨가하여 탄산가스의 주입에 의해 반죽의 온도 $100^{\circ}C$ 이하에서 팽화시킨 몇 가지 제품의 물리적 성질과 기계적 에너지 투입량을 분석하였다. 첨가된 유제품은 전지분유, 유청단백질 농축물, 탈지분유, 카제인 나트륨이며, 첨가량은 옥수수가루의 무게비로 10%와 20%를 각각 첨가시켰다. 압출성형기 바렐로 주입되는 가스압력을 0.7 MPa과 1.4 MPa로 조절하여 옥수수가루를 팽화시켰다. 시스템변수인 비기계적 에너지 투입량은 지방의 함량이 높은 전지분유의 첨가량이 증가할수록 감소하였다. 또한 카제인 나트륨의 첨가에 의한 비기계적 에너지의 투입량의 감소도 적었다. 압출성형물의 밀도는 주입압력 0.7 MPa까지는 점차적으로 감소하다가 그 이상의 압력에서는 증가하였다. 가스주입압력 0.7 MPa에서 유제품의 함량이 0, 10, 20%로 증가할수록 밀도는 증가하는 경향을 보였으며, 카제인 나트륨을 첨가했을 때 밀도가 증가하는 정도가 가장 낮았다. 가스주입압력이 0.7 MPa까지 팽화율은 증가하다가 그 이상의 주입압력에서는 감소했지만, 비길이는 계속 증가하는 경향을 나타내었다. 수분흡착지수는 유제품의 첨가에 의해 감소하는 경향을 나타내었고, 반면에 수분용해지수는 증가하는 경향을 보였다. 본 압출성형시스템을 이용한 유제품을 첨가한 옥수수가루 압출성형물 제조시 최적 가스주입압력은 0.7 MPa이였으며, 전지분유의 첨가는 제한인자가 되었으나, 카제인 나트륨의 첨가에 의하여 유제품의 첨가량을 높일 수 있었다.

• Elastomers and Composites
• /
• 제43권4호
• /
• pp.241-252
• /
• 2008

올레인산으로 유기변성된 ZnAl-LDH(SO-ZnAl LDH)를 합성하여 브롬화 에폭시 수지(BER) 및 산화안티몬을 포함하는 난연 ABS 컴파운드에 첨가하였다. 난연 ABS 컴파운드는 동일방향으로 회전하는 이축압출기를 통해 제조되었고 난연성 및 기계적 성질을 측정하기 위한 시편으로 사출성형 되었다. ABS 나노복합재료의 XRD 패턴에서는 피크가 나타나지 않았다. SOZnAl LDH를 포함하는 난연 ABS 나노복합재료는 TGA 시험 결과 향상된 내열성을 보였다. 그러나, 난연 ABS 나노복합재료들은 UL 94 수직시험(1.6 mm 두께)시 등급을 얻지 못했다. BER를 1.5 wt% 이상 더 첨가한 경우들에서만 UL 94 V0 등급을 얻을 수 있었다. SO-ZnAl LDH의 첨가량에 비례하여 난연 ABS 나노복합재료의 노치드 아이조드 충격강도, 인장탄성률 및 신율은 증가하였으나 유동지수는 감소하였다.

• 자원환경지질
• /
• 제33권2호
• /
• pp.147-163
• /
• 2000

The Buseok pluton in the Yeongju Batholith is a comagmatic plutonic rocks which haveconcentrically compositional zoning. The lithofacies of the Buseok pluton comprise hornblende biotite tonalite in the southern part of the pluton, porphyritic and equigranular biotite granodiorite in the northern part and biotite granite in the north-central part. The compositional variations change gradually with continuity both within and between the lithofacies. The concentrically zoned pattern is relatively mafic rocks composed of high-temperature mineral assemblages in margin of the southern part, passing inward and northward gradually to more felsic rock in core of the north-central part. Changes in the textures and microstructures, as well as in the mineral content, take place between rock types of the plutons. Darker colored, generally coarse-grained, well foliated tonalite pass inward to light colored, coarse-grained, poorly foliated granodiorite, and finally give way to lighter colored, medium-grained, nearly nonfoliated granite. The foliation are best developed in the marginal part of the tonalite. Here, the regional myolitic foliation in the tonalite is steep northward and parallels to its southeastern contact with the country rock, but the magmatic foliation from disc-shaped mafic microgranitoid enclaves is subvertical and parallels the contacts with the country rock. As the tonalite approaches biotite granite in composition, the foliation is indistinct. Modal and chemical data for the pluton show quantitative compositional variation from the margin of the southern part to the core of the north-central part. Quartz and K-feldspar increase toward the core of the pluton, whereas hornblende, biotite and color index decrease. /Abundances of $SiO_2$and $K_2O$$_2$O increase toward the core according to the variation in quartz and K-feldspar, whereas those of MnO, CaO, $TiO_2$, $Fe_2O_3$, MgO and $P_2O_5$ decrease corresponding to the variation in mafic and accessaries. The compositional zonation resulted from fractional crystallization involving downward settling of earlier crystals, accompanied by upward movement of melt and volatiles, and followed by accessary marginal accretion of crystalline material in the magma to the marginal part. Although a little crustal contamination by the wall rock is recognized from the isotope data, the contamination is not only dominated over but also appropriate for forming the compositional variation in the pluton.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.467-471
• /
• 2010

Composites of ceramic powders and an elastomer-based matrix were prepared by mixing $CaCO_3$ powders with polyethylene and polypropylene elastomers, and their mechanical and sound insulation properties were measured. $CaCO_3$ powders with 0.7 ${\mu}m$ and 35 ${\mu}m$ particle size were added to elastomers up to 80 wt%. Scanning electron microscopy photographs showed uniform distribution of the $CaCO_3$ powders in the matrix. While density and surface hardness increased, melt index, tensile strength and elongation of the composites decreased as the amount of added $CaCO_3$ powders increased. As more $CaCO_3$ powders were added sound transmission loss of the composites increased owing to the increase of density. Addition of 0.7 ${\mu}m$ sized $CaCO_3$ powders resulted in a slightly higher transmission loss than the addition of 35 ${\mu}m$ sized powders because of the increased interface area between the elastomer matrix and the $CaCO_3$ powders. Composites with a polyethylene matrix showed higher transmission loss than those with a polypropylene matrix because the tensile strength and hardness of the polyethylene-based composites were low and their elongation was high.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.361-369
• /
• 2018

A manufacturing method has been devised to prepare novel heterogeneous cation exchange membranes by mixing ethylene vinyl acetate (EVA) copolymers with a commercial cation exchange resin. Optimum material characteristics, mixture ratios and manufacturing conditions have been worked out for achieving favorable membrane performance. Ion exchange capacity, electrical resistance, water uptake, swelling ratio and tensile strength properties were measured. SEM analysis was used to monitor morphology. Effects of vinyl acetate (VA) content, melt index (MI) and ion exchange resin content on properties of heterogeneous cation exchange membranes have been discussed. An application test was carried out by mounting a selected membrane in a membrane capacitive deionization (MCDI) system to investigate its desalination capability. 0.92 meq/g of ion exchange capacity, $8.7{\Omega}.cm^2$ of electrical resistance, $40kgf/cm^2$ of tensile strength, 19% of swelling ratio, 42% of water uptake, and 56.4% salt removal rate were achieved at best. VA content plays a leading role on the extent of physical properties and performance; however, MI is important for having uniform distribution of resin grains and achieving better ionic conductivity. Overall, manufacturing cost has been suppressed to 5-10% of that of homogeneous ion exchange membranes.

• Journal of the korean society of oceanography
• /
• 제37권1호
• /
• pp.27-34
• /
• 2002

We measured the alkenone concentration of bulk sediments from a piston core collected from the Ulleung Basin in the East Sea in order to reconstruct past sea surface temperatures (SST). Sediment ages are well constrained by AMS $^{14}C$ dates of the planktonic foraminifera Globigerina bulloides. Coretop alkenone SST calibration with modern surface temperatures and sediment trap dat (Hong et al., 1996) indicate that the SST estimated from alkenones most likely represent the temperatures of late fall. Downcore variations in the alkenone saturation index indicate that between 19 and 15 kyr BP the surface waters were about $3^{\circ}C$ warmer than today. Between 15 and 11 kyr BP, the temperatures were about $3^{\circ}C$ lower than today. A rapid SST increase of about $3^{\circ}C$ occurred at approximately 10 kyr BP. After considering the factors which might influence the SST reconstruction from the $U^{k'}_{37}$ values, we conclude that the alkenone temperature estimates are reliable. The reason for glacial warming in the East Sea is not clear, although there is a possibility that it could be caused by shift in the season of maximum alkenone production from summer during the last glaciation to late fall during the Holocene. Cooling between 15 and 11 kyr BP may be due to inflow of cold water into the East Sea such as via the Oyashio Current or ice-melt water. Warming at the early Holocene could be due to inflow of the Tsushima Current into the East Sea through the Korea Strait.

• 공업화학
• /
• 제24권1호
• /
• pp.104-111
• /
• 2013

본 연구에서는 생분해성 지방족 폴리에스터 중 비교적 고가인 poly(butylene adipate-co-terephthalate) (PBAT)와 상대적으로 저가의 생분해성 고분자인 polylactic acid (PLA)의 블렌드에 3종류의 개질제를 사용하여 그 효과를 조사하였다. 개질제로는 에폭시계의 커플링제와 diisocyanate계열의 methylenediphenyl 4,4'-diisocyanate (MDI)와 hexamethylene diisocyanate (HDI)를 사용하였다. 여러 가지 조성의 블렌드에 용융흐름지수, 동적 점탄성을 조사하였다. 또한, 인장시험을 통한 기계적 물성 조사와 FE-SEM으로 시편의 파단표면을 관찰하였다. 이를 통해 PLA/PBAT 블렌드의 상용성과 개질제의 효과 및 기계적물성에 미치는 영향을 고찰하였다. 개질제로 HDI를 사용했을 때 PLA/PBAT의 인장물성이 크게 증가하였다.