• Earthquakes and Structures
• /
• v.19 no.5
• /
• pp.347-359
• /
• 2020

The Mega-Sub Controlled Structure System (MSCSS), an innovative vibration passive control system for building structures, is improved by adding lead rubber bearings (LRBs) on top of the substructure. For the new system, a genetic algorithm is used to optimize the dynamic parameters and distributions of dampers and LRBs. The program uses various seismic performance indicators as optimization objectives, and corresponding results are compared. It is found that the optimization procedure for maximizing the energy dissipation ratio yields the best solutions, and optimized models have consistent seismic performances under different earthquakes. Seismic performances of optimized MSCSS models with and without LRBs, as well as the traditional Mega-Sub Structure model, are evaluated and compared under El Centro wave, Taft wave and 20 other artificial waves. In both elastic and plastic analysis, the model with LRBs shows significantly smaller story drift and horizontal acceleration than those of the other two models, and fewer plastic hinges are developed during severe earthquakes. Energy analysis also shows that LRBs installed in proper locations increase the deformation and energy dissipation of dampers, thereby significantly reduce the kinetic, potential, and hysteretic energy in the structure. However, LRBs do not have to be mounted on all the additional columns. It is also demonstrated that LRBs at unfavorable locations can decrease the energy dissipation for dampers. After LRBs are installed, the optimal damping coefficient and the optimal damping exponent of dampers are reduced to produce the best damping effect.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.841-846
• /
• 2009

Recently, the construction industry is getting more complex and sophisticated having the characteristics of a mega project. Mega project pursues a value that can't be gained with an approach of seeing a project as just a simple sum of different parts but a mutual combination. However, the current manuals can't fulfill the needs for supporting, therefore, need a tool to support the decision making and an IETM is expected to take this role. Despite the a lot of expected advantages of IETM, it is still difficult to apply because of the frequent changes of information of detailed process and its complexity. In this research, as part of developing an IETM, we aim to propose a system frame which is based on the analysis of processes of a project. It is basic part of IETM to give information to users and IETM consists of normal mode that offers general information about the urban regeneration project and user-specified mode that gives classified and reorganized information to user. For supporting these functions, IETM should be stored in a form that can classify the information about urban regeneration project and be tagged with meaningful tags. Moreover IETM developers have to consider the interoperability of IETM because it ultimately should be coordinated with overall Project Management System like an iPMIS. We used XML for solution of interoperability because it stores information as just text-file that doesn't need a special form.

• Korean Journal of Remote Sensing
• /
• v.21 no.5
• /
• pp.433-443
• /
• 2005

This paper show that, without installation of expensive VR (Virtual Reality) program, the sharing information is possible through posting three-dimensional road structures on the web, and avoiding the conventional top-down decision making method, fast bottom-up communication is possible base on the Virtual GIS (Geographic Information System). In this paper, using Viewpoint Scene Builder, internet-based software, the transformation was conducted to give pertinent type for web posting. In order to use the completed route at the scene builder, the output with ASCII Export is required, and ASE (ASCII Scene Export) contains the property information including the coordinate and frame of mesh vertex. Through in advance recognition of the problems regarding route design and petition due to environmental rights infringement, the time and cost due to design alteration can be reduced. It's difficult to provide VR based on the internet because file that embodied with internet GIS was complicated and its capacity comes to scores of mega-bites. But, this study provides VR with internet according to a basis by simplification of files.

• International Journal of High-Rise Buildings
• /
• v.1 no.3
• /
• pp.221-228
• /
• 2012

Shanghai Tower is a super high-rise building of 632 m height with 'mega frame-core- outrigger truss' structure system. Due to the complexity and irregularity of structure, shaking table test was carried out to investigate its seismic performance. A 1/40 scaled test model was designed, built and tested on shaking table under earthquake of small, moderate and large levels. The experimental results showed that the structure can meet the requirements of Chinese codes and reach scheduled performance objectives. Elastic and plastic time-history analysis on the structure were carried out and the results were compared to experimental results. Based on the research results some suggestions were proposed to contribute favorable effect on the seismic capacity of the structure.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.19-31
• /
• 2005

Purpose : To supply the information of EPID system and to analyze the possibility of substitution EPID for film dosimetry. Materials & Methods : With amorphous silicon(aSi) type EPID and liquid filled lonization chamber(LC) type EPID, the reproducibility according to focus detector distance(FDD) change and gantry rotation was analyzed, and also the possible range of image acquisition was analyzed with Alderson Rando phantom. The resolution and the contrast of aSi type EPID image were analyzed through Las Vegas phantom and water phantom. DMLC image was analyzed with X-Omat V film and EPID to see wether it could be applied to the qualify assurance(QA) of IMRT. Results : The reproducibility of FDD position was within 1mm, but the reproducibility of gantry rotation was ${\pm}2,\;{\pm}3mm$ respectively. The resolution and the contrast of EPID image were affected by dose rate, image acquisition time, image acquisition method and frame number. According to the possible range of image acquisition of EPID, it is verified that the EPID is easier to use than film. There is no difference between X-Omat V film and EPID images for the QA of IMRT. Conclusion : Through various evaluation, we could obtain lots of useful information about the EPID. Because the EPID has digital data, also we found that the EPID is more useful than film dosimerty for the periodical Qualify Assurance of IMRT. Especially when it is difficult to do point dose measurement with diode or ionization chamber, the EPID could be very useful substitute. And we found that the diode and ionization chamber are difficult to evaluate the sliding window images of IMRT, but the EPID was more useful to do it.

• Journal of Science of Art and Design
• /
• v.12
• /
• pp.65-96
• /
• 2007

Today, the modern art is extremely diverse. It is denying its own boundary through chaos, extreme, abjection. In fact the diversity of the modern art can be best described as questioning and challenging to the essence of the reality, rather than the artistic pursuit of the beauties. The pursuit of the reality has been a long lasting discourse since the ancient. Through the history, the reality (referent) and representation (image) has been complementing and disposing each other in a relationship of a meaningful construction until the modern times. The limit of modernistic self-reference and the emergence of the figure leads to the emergence of Post-modernism in a trend of experimenting new visual arts. The return to the figure is clearly distinguished from existing representation's system and it brought new meanings to approaches and interpretations of the reality. In the case of Pop arts of 1960's and the following the modern sculptures, which is covered by this thesis, I put an emphasis on the diversification of those via changed strategies on the reality. In a situation where the reality is dictated by signified, the modern arts can no longer stay on a classic concept of representation, rather it pursuits new system and diverse strategies. I provide three types of strategic characters of the reality and the diversification of reality: the transition of the reality. These three types can be used as a frame work, which is supporting new aspects of the modern arts in reflecting on existing system. Therefore, the reason of categorizing is to distinguish modernistic arts and post modernistic arts, and to propose new post-modernistic discourses. Adapting J.F, Lyotard's view, absence is used to trace down the diversification of the reality thorough the sublime on the deconstruction of the mega discourses and the relationship of representation. Based on H. Faster's theory of the appropriation, the appropriation is used to exemplify the strategies of visual arts are in variations and being delayed. Lastly, in the transition, J. Baudrilliard's simulacre is used in terms of the concept of post modernistic representation. Based on the core of his theories, the deconstruction of existing concepts and simulation as the post modernistic representation, and the world of hyperreality based on simulacre are explained. These allows us to deny that representation is the expression of reality through mimesis. My aim is to work on the definition of the arts and representation in the modern era, and go further from there in order to clarify meaning and extension of the modern sculptures. Now two artists are reviewed based on their own art works: George Seagal; Jeff Koons. They are selected among numerous artists from the Post Modern era. Epic contents and emphasis on daily life of Seagal's works show good examples to artists from Pop Arts and following time period and may have served as a start point for Postmodernism. Indeed, he tried to show a newly defined relationship between art works and daily life experience. On the other hand, J.Koons used the strategies of fabrication and appropriation, which shows characteristics of the postmodernism. Through his four individual exhibitions, he shows the diversification of the reality based on art works as fetishistic merchandises, and newly defined concept of Ready-made since M Duchamp. Lastly, the diversification of the reality is analyzed again in context of my art works. I focused on the return to the figure among a variety of trends of late 20 th century modern sculpture. It showed the post modernistic point of view on the reality. Post modernistic diversified strategies are adopted as a method of distinguishing each art works via the diversification of the reality. This is the result of contemporary social and cultural situations.