• Journal of Korea Water Resources Association
• /
• v.49 no.9
• /
• pp.741-748
• /
• 2016

Laboratory scale model was constructed for open-cut riverbed infiltration experiment and four kinds of media were selected, medium sand, sand, volcanic rock, and gravel, for the experiment. Hydraulic conductivity for each medium and flow rate from the collecting pipe with functional screen were estimated from the experiment. Modified hydraulic conductivity scenarios considering turbid water (30~50 NTU) were applied in Visual MODFLOW modeling to analyze the effects of turbid water on the flow rate. Twenty-two scenarios were generated considering prticles in turbid water and applied to each medium cases in MODFLOW modeling. The minimum error was occurred when the gravel medium had 20% less hydraulic conductivities for the third layer-depth from the top and clay particles in turbid water might play a role in adsorption process to the surface of volcanic rock (2~5 mm). For medium sand case the error was also quite small when the mediumhas 5% less hydraulic conductivities for the second layer-depth from the top.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.5
• /
• pp.773-780
• /
• 2008

The principal objective of this study was to assess the effects of maesil extract on yellow layer cake made with medium and cake flour. After making yellow layer cakes with maesil extract, water activity, hardness, Max G, springiness and crumb color were evaluated. During storage, the Aw of the yellow layer cakes prepared with maesil extract did not retain its consistency. The hardness, Max. G. and springiness of the yellow layer cakes prepared with maesil extract were all lower than that of the controls. With regard to the color of the yellow layer cakes, the L values were reduced, but the a and b values were increased with the addition of maesil extract. The micrographs of the yellow layer cakes prepared with maesil extract evidenced slightly higher porosity than was observed in the controls. This meant that the cake batter prepared with maesil extract could be used to create yellow layer cake with good volume and good quality.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.1
• /
• pp.61-67
• /
• 2015

The concept of horizontal shear connection utilization on wood-concrete beams intends to be an alternative connection detail for composite wood-concrete decks. The volume of sawn-wood is over three times more expensive than concrete, in Brazil. In order to be competitive in the Brazilian market we need a composite deck with the least amount of wood and a simple and inexpensive connection detail. This research project uses medium to high density tropical hardwoods managed from the Brazilian Amazon region and construction steel rods. The beams studied are composed of a bottom layer of staggered wood boards and a top layer of concrete. The wood members are laterally nailed together to form a wide beam, and horizontal rebar connectors are installed before the concrete layer is applied on top. Two sets of wood-concrete layered beams with horizontal rebar connectors (6 and 8) were tested in third-point loading flexural bending. The initial results reveal medium composite efficiency for the beams tested. An improvement on the previously conceived connection detail (set with six connectors) for the composite wood-concrete structural floor system was achieved by the set with eight connectors. The new layout of the horizontal rebar connectors added higher composite efficiency for the beams tested. Further analysis with advanced rigorous numerical Finite Element Modeling is suggested to optimize the connection parameters. Composite wood-concrete decks can attend a large demand for pedestrian bridges, as well as residential and commercial slabs in the Brazilian Amazon.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.757-763
• /
• 2000

It is fundamental to control individual condition of every seedling. Automatic individual control is used by data control and analysis at on-line. As a result the best condition system was build without all waste. This system uses one of new technology irrigation system. This irrigation system supply accurate quantity of nutrient solution in the shortest time. The system named the upward injection irrigation system. First of all it is necessary to be considered whether the soil is proper or improper for upward injection irrigation system. It is important that root absorb nutrient solution as fast as possible. The ability of spreading, storing water, contamination of environment and cost were considered when choose the medium. The soil of organic culture is developed recently. The soil consists of paper pulp and vermiculite. The new soil is more suitable than ordinary medium for growing plant because this medium is made of paper pulp. The ability of store and spread of water is it's feature. We can make paper tray of this paper pulp's raw material. It is possible that pulp tray replaced plastic tray. The original plug tray of growing seedling system can make which consist of pulp medium and pulp tray. In this study, it was examined whether the plug seedling of paper pulp medium grow with upward injection irrigation system in this seedling plant system. At the same time, examine ability of store and spread of water and how to grow plant on the paper pulp medium.

• Structural Engineering and Mechanics
• /
• v.58 no.3
• /
• pp.423-442
• /
• 2016

This study considers a functionally graded (FG) elastic layer resting on homogeneous elastic substrate under axisymmetric static loading. The shear modulus of the FG layer is assumed to vary in an exponential form through the thickness. In solution, the FG layer is approximated into a multilayered medium consisting of thin homogeneous sublayers. Stiffness matrices for a typical homogeneous isotropic elastic layer and a half-space are first obtained by solving the axisymmetric elasticity equations with the aid of Hankel's transform. Global stiffness matrix is, then, assembled by considering the continuity conditions at the interfaces. Numerical results for the displacements and the stresses are obtained and compared with those of the classical elasticity and the finite element solutions. According to the results of the study, the approach employed here is accurate and efficient for elasto-static problems of FGMs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.828-834
• /
• 2010

In this paper, an adaptive cross-layer resource allocation algorithm for the downlink multi-user OFDM system is proposed. The proposed algorithm does not only concern the wireless characteristics of physical (PHY) layer, but also pays attention to the user's quality of service (QoS) requirement, fairness, and packet queue state information of medium access control (MAC) layer. The algorithm is composed of two parts: one is to decide the priority of the user, and the other is to assign the radio resource according to its priority. Simulation results show that the proposed algorithm has both steady QoS and low computation complexity, even though the mobile users have different receiving signal to noise ratio (SNR).

• ETRI Journal
• /
• v.36 no.4
• /
• pp.564-571
• /
• 2014

Sphere decoding (SD) for multiple-input and multiple-output systems is a well-recognized approach for achieving near-maximum likelihood performance with reduced complexity. SD is a tree search process, whereby a large number of nodes can be searched in an effort to find an estimation of a transmitted symbol vector. In this paper, a simple and generalized approach called layer pruning is proposed to achieve complexity reduction in SD. Pruning a layer from a search process reduces the total number of nodes in a sphere search. The symbols corresponding to the pruned layer are obtained by adopting a QRM-MLD receiver. Simulation results show that the proposed method reduces the number of nodes to be searched for decoding the transmitted symbols by maintaining negligible performance loss. The proposed technique reduces the complexity by 35% to 42% in the low and medium signal-to-noise ratio regime. To demonstrate the potential of our method, we compare the results with another well-known method - namely, probabilistic tree pruning SD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.220.1-220.1
• /
• 2009

• Journal of Plant Biology
• /
• v.13 no.3
• /
• pp.17-19
• /
• 1970

Histological observation of micropore-originated haploid rice callus was reported previously. Present study was attempted to clarify the growth or development of the calli when they were transferred to differentiation media prepared exclusively for differentiation of plantlets. When the callus was transferred to differentiation medium, the cells and tissues became radially elongated. Meristematic tissues were present but few in number, and their structures were quite different from those grown in the propagaton medium. Differentiation of tracheid, chloroplast, and epidermis-like cell layer, and formation of gap in the callus tissue were more conspicuous in differentiation media. Approximately ten days after transfer of callus to differentiation medium, plantlet was formed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.17-24
• /
• 2013

The localization accuracy in wireless sensor networks using ranging-based localization algorithms is greatly influenced by the ranging accuracy. Software implementation of HAL(Hardware Abstraction Layer) and MAC(Medium Access Layer) should seamlessly deliver the raw performance of ranging-based localization provided by hardware capability fully to the applications without degrading the raw performance. This paper presents the design and implementation of the software stack for IEEE 802.15.4a which supports normal ranging mode of the Nanotron's NA5TR1 RF chip. The experiment results shows that average ranging error rate with our implementation is 24.5% for the normal mode of the SDS-TWR ranging scheme.