• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.922-924
• /
• 2000

We worried about the technology difference between our company and the advanced companies at present motor market. Thus we started independently to develop the technology of motor coil insulation system and to accumulate insulation technology data. When we export the electric machines to oversee market. we are asked to set up the insulation system to show our product excellence. We first evaluate the insulation system of our motors to realize higher reliability of high voltage insulation system. Therefore we are possible to do the insulation diagnosis in real site and have accumulated the data related in insulation diagnosis. Thus we have improved the our insulation system. And also these data were used to new product development as very useful data. also will be used the insulation deterioration diagnosis to estimate the remained life time which is very important data for the maintenance management. As the result. we are able to get the our product reliability.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.62-66
• /
• 2023

With the advancement in technology and rapid increase in the demand for microelectromechanical systems (MEMS) based inertial measurement units (IMUs), high-volume production and test system remain a major challenge for the MEMS industry. To compete with the challenging market of Industry 4.0, here we developed an automatic test system to evaluate the performance of the ovenized IMU sensors as well as analyze the data. The automatic test system was developed by interfacing a commercial MEMS IMU (BMI 088) using LabVIEW. The BMI 088 was tested experimentally for long-term bias stability, ON/OFF bias repeatability, and root mean square (rms) noise. Furthermore, the data was analyzed through the developed test system. The results show that the automatic test system has improved the test time and reduced human effort. The developed automatic test system is a significant approach to MEMS research and development (R&D) to increase and improve the mass production of IMUs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.110-112
• /
• 2012

Education and training of technical staff for the new generation technological equipment has a vital importance for developing countries in order to maintain sustainable development and keep up with new generation technologies. Mechatronics the synergistic combination of mechanical, electronic and software engineering from an engineering perspective to serve the purposes of controlling advanced hybrid systems is a product of new generation technology which can be given as a sample to this phenomenon. Recent marine engines are combination of heavy industry with high technology. Nowadays, ships are built in full automation and equipped with computer controlled mechatronics systems. However, finding qualified officer and engineers who can operate, maintain, control and repair when it is required such full automatic systems with knowledge of a new generation system became a serious issue. Due to importance of this fact STCW Manila amendment has new training and certification requirements for electro-technical officers. In this paper, Mechatronics applications on ship are introduced, importance of it highlighted and a new syllabus is proposed for the training of marine engineers to be nurtured with mechatronics knowledge as it is required.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2345-2347
• /
• 2000

ABS(Antilock Brake System) prevents the wheels from "locking" and improve "handling" during braking. Currently, safety and environmental issues are a major concern in the automotive industry. ABS has become the vital brake system. ABS is composed of sensors for wheel speed, a pressure modulator for controlling the brake pressures in the wheel brake cylinders, and an electronic control unit(ECU) which evaluates the signals from the wheel speed sensors and converts these to commands to control the pressure of modulator. In this paper, ECU developed for commercial vehicles is described. Detection of wheel slip, control algorithms of ABS, and diagnosis method of ECU are presented.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.139-144
• /
• 2012

In the automobile industry, the various efforts to lower their industrial cost and enhance fuel efficiency have been made through process improvement or weight saving of automobile parts. Gear is one of significant parts of transmission, which is made by cast iron or alloy steel. It is expensive due to complex processing, inferior materials and large machining allowance. In this study, alternative gear cars oil which is based on fluid applications materials is produced by reducing surface induction hardening and carburizing hardened in production. And then, wear characteristic and mechanical properties such as hardness of the sintered alloy which is used as a substitute for small machining allowance is investigated.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1097-1102
• /
• 2022

With the continuous development of the current industry, the current global environment is in a very serious situation, with resource supply and demand dependent on imports and huge costs for waste disposal due to the depletion of resources and mass generation of industrial waste. Its limitations have already been revealed in many fields, and the importance of re-manufacturing is drawing attention as a countermeasure to these problems. Re-manufacturing aims to recover products that are in the aging and disposal stages, recover to performance close to new products, and re-commercialize them. Among them, most of the machine tools are made of materials such as steel and cast iron with large structures, and raw materials are widely used when producing new products. In addition, since a lot of carbon is generated due to production, it is an object that can obtain a great re-manufacturing effect. Planner millers belonging to large machine tools are one of the machine tool equipment that can greatly reduce resources and energy through re-manufacturing because the structure is very large and the casting is several to tens of tons. Through this machine tool, performance tests and results are derived on the development of re-manufacturing source technology and domestic servo motor and CNC control device.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.98-105
• /
• 2017

In the display industry, the residual vibration of the transfer robot can increase the process time and cause the breakage of the glass substrate, which is critical to productivity of display manufacturing. In this paper, the natural frequencies of transfer robot are analyzed by finite element method. On the basis of the analyzed data, we investigated the response characteristics of input shaping control with or without the glass presence on the hand of the transfer robot using MATLAB program, and compared with the current response characteristics of input shaping control applied to the industry. Based on this, we suggest an optimal residual vibration control method for the practical application in display industry.

• Design & Manufacturing
• /
• v.9 no.1
• /
• pp.9-13
• /
• 2015

The HEV/EV Traction Motor Core manufacturing technology is a core component of Traction Motor Core is a key technology for the manufacture of eco-friendly automotive industry is essential for the competitiveness of the country must obtain the technology. This study was performed to develop a Rotor Core of the HEV/EV Traction Motor using the first time in Korea multi-gate BMC injection molding technique. Executed by the experiment of this study are as follows. Study 1: Developed a multi-gate BMC injection mold for the magnet fixed to the Rotor Core. Study 2: Developed a production implementation and manufacturing technology of the Rotor Core. In this study, the develop products and manufacturing technologies implemented by the BMC injection mold development for Magnet fixed to the Rotor Core and the results are discussed.

• Aerospace Industry
• /
• v.40
• /
• pp.12-15
• /
• 1996

• Journal of the Korean Society of Costume
• /
• v.61 no.9
• /
• pp.97-113
• /
• 2011

To develop the work clothes for the employees in the mechatronics industry in South Korea, a questionnaire survey on many aspects of the work clothes such as type, color, detailed design and function preference of the subject employees has been carried out in the study. The results throughout the survey highlighted certain functions such as extensibility, thermal and air permeability of importance for the work clothing performance. To improve the discomfort caused by some work motions (i.e. squatting down, ascending/descending the stairs, raising arms), more allowances were given to the measurements (i.e. body rise + 2cm and crotch depth + 1cm for squatting down pose; thigh circumference + 1cm and knee circumference + 1cm for ascending/ descending the stairs pose; chest circumference + 5~6cm and jumper length to the level of hip circumference line for raising arms pose) for work clothes patternmaking. The evaluation of the two types of spring/summer and winter work clothes' clothing comfort and wearer mobility suggested certain points to improve the clothing performance (e.g. ventilation slits on the back pleats, arm pits and collar band of the spring/summer suit using net material and lining for the winter suit using quilted thermal materials) and wearer mobility (e.g. pants hem buckles for the easy work motion), which also enabled to fulfill the workers' work clothes design preference.