• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.24-29
• /
• 2020

In South Korea, agricultural mechanization has been carried out in paddy field, but not in the upland field during recent decades. Among crops such as root vegetables, leafy vegetables from upland field, corn is used as forage for livestock as well as food for men. The corn harvester needs to be developed to replace men's labor in rural area to follow the recent needs in the farm industry. The corn harvester is comprised of three parts such as cutting part, feeding part and pick-up part. The feeding part is so long for cut corns to be delivered from the cutting part to the pick-up part. Structurally, the load from the long moment arm is likely to be big. Thus, the setup to measure the stress on the duct of the feeding part was configured with the data acquisition system. The strain gages were attached on several points that seem to be loaded a lot comparatively. The stress was measured and the measured stresses were divided by the yield stress to get the safety factor. And then, we made sure the safety factors were above 1 on the all points. In conclusion, the feeding part of the corn harvester which convey the cut corn from the cutting part from the pick-up part can be regarded to be made safe structurally.

• 한국축산시설환경학회지
• /
• 제4권2호
• /
• pp.97-104
• /
• 1998

In order to advise how to solve the problems and suggest on the mechanization of beef farm, the facilities and equipment for feeding and supplying water to the animals and transporting manure, and farm machineries of sixty-seven beef cattle farms in western Chungnam Province were surveyed. The results are as follows; 1. The proportions of number of heads per farm for above 70, 50∼70, 30∼50, 10∼30 and below 10 heads were 26, 18, 29, 13 and 13, respectively. The farms with the annual income more than 30 million won are consisted of 67.6% of the farms surveyed which showed to be higher than national average. 2. Only 19% of farms had automatic feeding system. Water was supplied by water cup(45%), opening and shutting water tab(27.6%) and bucket. 3. Cattle manure was transported by manpower (46%) by loader (34%) and by gravitational flow (14%). Most of manure(97%) was composted after treatment of drying or piling up outside. 4. More instruction and education were required because of the insufficient routine checking and fixing for farming machines, and unsystematic education for learning skills. 5. 65% of farms felt unsatisfied about after service(A/S) for their machinery. The main reason why the farmers were not satisfied was that it took too much time to be repaired. 6. When the farms purchased facilities, equipment and machinery, they did not analyze economic value of them and keep a diary. To make effective use of machines, the most available model for purchasing and managing of machines must be developed and applied to various scales of management.

• 대한한의학회지
• /
• 제15권2호
• /
• pp.306-320
• /
• 1994

An account book of medical treatment is a form of collection materials for diagnostic standardization, and it is a basis of standardization, standardization of medical records is a preconsideration of each standardization. But an account book of medical treatment is only a kind of form for recording medical treatment, therefore standardization of medical treatment eventually holds the key to the standardization of recording charts. However until now we have gradually reformed medical records in accordance with individual characters of medical treatment, and didn't have even standard sheme of medical records, also medical terms for medical records had an inconsistency of redescription and reiterative representation for an identical terms in all parts of the East learning, medical terms for medical records didn't unity. To make better this realities, standardization study used orginated system in the process of existing study, it can get ready the basis of discussion between O.M.D and O.M.D. it can make analysis of diagnostic course and can clearly understand usable information by diagnostic course. for that reason we hope that the basis of standardization is accomplished. And in advance of study for this standardization we have to analysis the course of medical treatment with demonstration of roof, first of all we have to study term definition by diagnostic course and prepare basis by diagnostic course. because this study have limits of indivisual study, it needs to long and synthetic investigation in Association levels. Although we cann't completely alternate with methods of measurement which relyed on individual mastery, if we exclude erroes of individual measurement through mechanization and verify results of diagnosis through keynotes, we can realize standardization of medical treatment with demonstration of proof and in this process we can use medical records as a tool collecting exact data, also we can realize standardization of drawing up medical records.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.287-294
• /
• 2000

Calculation of the flexural rigidity value (EI) is indispensable for prescription of deflection characteristics of crop stalks in harvesting□Conventionally□EI has been determined by either average EI of the whole stalk or average EI of each stems divided into node through the calculation method of cantilever with homogeneous section□However□deflection characteristics of crop stalks caused by mechanical operation such as combine harvester were not exactly presumed by these conventional EI through the experiment by authors. Further, actual EI of a stalk changes in company with a change of moisture contents as time passes during the experiment. Finally, efficient calculation method for determining EI is needed in order to improve these problems. In this study, mechanical model based on actual structure of the crop stalk with variety sectional area was proposed. This mechanical model is calculated by the theory of cantilever with continuous stages. Therefore, improvement of both calculating accuracy on EI and efficiency of measuring system was tried. At first, this calculation method was applied to piano wire of which EI was recognized in advance. As a result, EI calculated from this new method coincided approximately with piano wire's EI. Next, applying to crop stalks as same as piano wire, relationship between loads acting on crop stalks and deflection values calculated by EI using this new calculation method was exactly presumed in comparison with conventional method. Further, measuring time of deflection test was greatly reduced. Finally, new calculation method of EI will be available for estimating mechanical characteristics of so many kinds of crop stalks in harvesting operation. Further, in this study, new deflection test using image-processing apparatus by computer will be introduced.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.967-976
• /
• 1996

Straw and other fibrous by-products are inevitably produced during cereal production and have traditionally been used for many purposes including feeding animals . The potential of these by -products as a feed resource for ruminants is being increasingly appreciated (FAO , 1977). In the future, the amount of cereals fed to farm animals will have to be reduced and livestock will have to rely more on by-products such as straw. The method of animal production can be classified by the major portion of feed. One is animal forage and the other is grains. In Korea , livestock farmers normally depend more than 70% upon grains for the feed stuff. The livestock production system causes the unbalance of nutrition, and results in low productivity of animal farming. In many livestock farms in Korea the rice straw is using as a major forage and the amount of rice straw fed takes 46% of total amount of required forages. Especially the rice straw is mainly using during spring, fall and winte season. However, there are still lots of problems to solved such as harvesting cost, transportation between rice farm ad livestock farm, and quality loss during drying and storage . Therefore the mechanization of straw harvesting is urgently needed to use the renewable agricultural by-products and to overcome the shortage of animal forage. The objective of this research is to develope a straw harvester with new concept which can solve the problems of the quality loss and the labor cost during drying in a field, collecting , and storage. The developed straw harvester is self-propelled machine rebuilt by rice combine and equipped with the pick-up device, the macerater and the mat-forming device.

• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.81-88
• /
• 2005

Manual transplanting Chinese cabbage needs 184 hours per ha in Korea. Mechanization of Chinese cabbage transplanting operation has been highly required because it needs highly intensive labor during peak season. This study was conducted to developed walking-type Chinese cabbage transplanter. In order to find out design factor of the transplanter, a kinematic analysis software, RecurDyn, was used. The prototype was tested in the circular soil bin and its operating motion was captured and analyzed using high speed camera system. Prototype was one row type which utilized original parts of engine, transmission and etc. from walking-type rice transplanter in order to save the manufacturing cost. Success ratio of pick-up device of hole-pin type and latch type were $96.0\%$ and $99.2\%$, respectively. which was highly affected by feeding accuracy of feeding device of seedling. Transplanting device of the prototype produced a elliptic loci which were coincident with those produced by the computer simulation. Prototype proved good performance in transplanting with mulching and without mulching operation, either. Working performance of prototype was 22 hours per ha and operation cost of the prototype was 961,757 won per ha. So, it would reduce $88\%$ of the labor and $29\%$ of operation cost.

• 한국작물학회지
• /
• 제29권3호
• /
• pp.261-266
• /
• 1984

보리 수확의 기계화를 위한 작업기술체계를 확립하고자 대맥 강보리를 공시품종으로 1982∼'83 2개년에 걸쳐 기종 및 수확시기에 따른 작업능률, 종실손실정도 및 곡물품위 등을 대상으로 일련의 시험을 수행한 바 그 결과를 요약하면 다음과 같다. 1. 출수 30일후 종실의 수분함량은 54.3％ 줄기는 59.5％로 이들은 일수가 경과함에 따라 직선적인 감소를 보였는데 특히 출수후 35∼40일 사이에서 일당 감소율이 각각 3.1％, 3.9％로 가장 컸다. 2. 관행(인력)에 비해 수확 및 탈곡작업시간은 평균 콤바인 93％, 바인다 81％, 초예기 44％를 절감시킬 수 있었고, 소요경비도 콤바인 44.5％, 바인다 36.5％, 초예기 20.0％를 각각 절약할 수 있었다. 3. 수량에 대한 10a당 평균 손실률은 인력이 5.8％로 가장 적었고 다음이 바인다로 7.0％, 콤바인 9.1％, 초예기가 13.8％로 가장 많았으며 수확시기별로는 출수후 일수가 더함에 따라 다소 증가하는 경향이었다. 4. 수확시기에 있어서 출수후 30일을 제외하고는 종실이 지녀야 할 일반적인 품위에 대한 차이가 미미한 점으로 볼 때 기계를 이용한 수확작업은 출수후 35일이 경과한 시기로서 작업능률 즉 소요시간, 경비 및 손실량 등의 관련요인들을 가장 유리하게 발현시킬 수 있었다.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.434-438
• /
• 2012

Purpose: This study was performed in order to improve problems and to seek the efficient operating plan by surveying and analyzing the actual status of operating the agricultural machinery rental business supported by the government. Method: The data was collected through two times of survey targeting lease business operators and the leasing business reports published for the past 3 years ('08~'10) 120 cities and counties. Results: As a result of surveying 120 cities and counties nationwide of operating the agricultural machinery rental business, 96% of agricultural machinery rental businesses were indicated to be operated in the form of short-term rent for about 1~3 days centering on small-sized agricultural machinery and attachment for upland crop. As for the unit number of possessing rental agricultural machinery and the purchase cost, it was indicated to be greatly reduced the agricultural machinery for rice farming and to be expanded into upland crop whose mechanization is insufficient. The annual rental days ('10) are 9.5 days/unit, thereby being a little insufficient. Rental fee for 1 day is 0.2~0.8% of the initial purchase cost of agricultural machine, thereby being greatly lower compared to 2.0% (annually 10-day rent) of the proper rents, resulting in being demanded improvement. Conclusions: To be continuously driven the rental business of agricultural machinery with having the ability to propagate, it is judged to be likely to necessarily collect optimum rental fee in consideration of rental days as well as increasing the use days per unit by buying the agricultural machinery, which is secured the rental demand, and by possessing the reasonable unit number.

• 농업과학연구
• /
• 제25권2호
• /
• pp.293-309
• /
• 1998

This study is aimed at identifying the decision making criteria as B/C ratio, IRR and NPV based on the expected benefits and costs of the land utilization and promotion projects which have implemented to improve agricultural structure under WTO system. To carry out the objectives of the study, Sinseok project area located at Dangjin district, Chungnam province was selected. Sinseok project area has 306.2 ha of paddy area with 172 farm households. The project area will be operated by the 33 specialized farm households after completion of the project which will have 20 years of economic life. After completion of the project, farm size will be increased from 1.8ha to 9.3ha. Land intensity of the project area will be increased by 10%. Increase of land productivity and cost saving due to the labor saving technology as farm mechanization will be expected. According to the survey results, the annual amount of production cost savings per farm was estimated 3.884million won and increased total farm income was expected about 43.8million won per year. The total expexted project benefits was expected 174million won per year. The project costs to promote land utilization and structural change consisted of handling charges, and direct payment for land movility. The decision making criteria representing economic feasibility of the project such as B/C ratio, NPV and IRR were estimated 2.49, 483million won and 30% respectively when the cut-off rate was taken into account 10%. In conclusion, the land utilization and promotion project proppeled by the Korean Government under the agricultural land law is considered economically feasible from the view points of expected project benefits and costs. Accordingly the project have to be implemented more strongly under the G't financial support considering WTO and UR negociation which were aimed at achieving the free trade and improvement of international competitiveness of farm products.

• 한국농공학회지
• /
• 제23권2호
• /
• pp.61-69
• /
• 1981

The paddies in the hillsides in Gonggeun-myeon, Hoingseong-gun, Kangweon-do keep a steep slope and run in and out. A land consolidation in such an area, therefore, will require high ratio of land loss and a large amount of earth moving if it follows the existing design criteria to separate drainage and irrigation ditches in a scheme. Due to the consequent decrease in construction cost, the project has not been envisaged. in order to secure the introduction of small-medium size farm machineries into the paddies, farm plots were planned to be straight and drainage with taking care of topography. Findings from the comparison of methodologies are as follows. 1. In places with a solpe of more than 1/30, a reduction in earth moving can be expected with parallel plots to the contours. 2, For the sake of effective using of farm machineries, it is thought that a plot should be running straight parallel to the contours and the ratio of length and width of a plot be more than six. 3. In places with a slop of more than 1/10, a reduction in earth moving and a effective introduction of farm-machineries can he expected with straight parllel plots to the contours. But it is undesirable to introduce a scheme in this places because of the difficulties in acreage computation and farmers' hesitation. 4. The system with a canal for both irrigation and drainage is highly effective to decrease the ratio of land loss as well as construction cost. 5. Parallel plots to the contours and a canal for both irrigation and drainage are highly effective in the decrease in construct cost. 6. To avoid the subdivision of a cooperation in farming is desirable of a plots, has more than two owners.