• 대한화학회지
• /
• 제60권5호
• /
• pp.353-361
• /
• 2016

The goal of this study was to examine the current status of science teachers’ stage of concern (SOC) and level of use (LoU) on descriptive assessment and determine the relationship between SoC and LoU. To achieve this, concerns-based adoption model (CBAM) was used, and a survey was conducted on 138 science teachers. The data from this study were analyzed by frequency analysis, percentile analysis based on CBAM, χ² test, and Spearman correlation analysis. SoC and LoU of the science teachers observed in this study are as follows. First, the science teachers’ overall SoC for the descriptive assessment was low and showed a typical pattern of the initial stage when the program was introduced. Second, LoU analysis on descriptive assessment showed that the “mechanical Use” (N=49, 35.5%) or “routine” (N=48, 34.8%) accounted for the majority. Third, the Spearman correlation between SoC and LoU on descriptive assessment was .299(p<.01). This suggests that teachers’ SoC needs to be increased in order to promote higher LoU on descriptive assessment, which requires new alternative measures.

• 공학교육연구
• /
• 제14권6호
• /
• pp.41-47
• /
• 2011

Professional communication skills in writing and speaking with multiple and complex audiences are required to engineers in society of modern technology. In this paper, we proposed the effective assessment system for the Program Outcomes on the communication skill competence(PO7), which is one of the 12 program outcomes stipulated by ABEEK (Accreditation Board for Engineering Education of Korea). To ensure logical connectivity of the assessment system, we carefully selected the performance criteria by defining the core concept of "written communication" and "verbal communication". Based on the selected performance criteria, the whole process of creating assessment tools and rubrics was explained in detail. It can be expected that the assessment for the Program Outcomes on the communication skill competence would be more systematic by using the proposed assessment system.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1139-1146
• /
• 2001

The reactor pressure vessel(RPV) is usually cladded with stainless steel to prevent corrosion and radiation embrittlement, and a number of subclad cracks have been found during an in-service-inspection. These subclad cracks should be assured for a safe operation under normal conditions and faulted conditions such as pressurized thermal shock(PTS). Currently available integrity assessment procedure for an RPV, ASME Code Sec. XI, are built on the basis of linear fracture mechanics (LEFM). In PTS condition, however, thermal stress and mechanical stress give rise to high tensile stress at the cladding and elastic-plastic behavior is expected in this area. Therfore, ASME Code Sec. XI is overly conservative in assessing the structural integrity under PTS condition. In this paper, the fracture parameter (stress intensity factor, K, and RT(sub)NDT) from elastic analysis using ASME Sec. XI and finite element method were validated against 3-D elastic-plastic finite element analyses. The difference between elastic and elastic-plastic analysis became significant with increasing crack depth. Therfore, it is recommended to perform elastic-plastic analysis for the accurate assessment of subclad cracks under TPS which causes plastic deformation at the cladding.

• Advances in concrete construction
• /
• 제16권6호
• /
• pp.303-316
• /
• 2023

Using industrial wastes and construction and demolition (C&D) wastes is potentially advantageous for concrete production in terms of sustainability improvement. In this paper, a sustainable Self-Compacting Concrete (SCC) made with industrial wastes and C&D wastes was proposed by considerably replacing natural counterparts with recycled coarse aggregates (RCAs) and supplementary cementitious materials (SCMs) (i.e., Fly ash (FA), ground granulated blast furnace slag (GGBS) and silica fume (SF)). A total of 12 SCC mixes with various RCAs and different combination SCMs were prepared, which comprise binary, ternary and quaternary mixes. The mechanical properties in terms of compressive strength and static elasticity modulus of recycled aggregates (RA-SCC) mixes were determined and analyzed. Microstructural study was implemented to analyze the reason of improvement on mechanical properties. By means of life cycle assessment (LCA) method, the environmental impacts of RA-SCC with various RCAs and SCMs were quantified, analyzed and compared in the system boundary of "cradle-to-gate". In addition, the comparison of LCA results with respect to mechanical properties was conducted. The results demonstrate that the addition of proposed combination SCMs leads to significant improvement in mechanical properties of quaternary RA-SCC mixes with FA, GGBS and SF. Furthermore, quaternary RA-SCC mixes emit lowest environmental burdens without compromising mechanical properties. Thus, using the combination of FA, GGBS and SF as cement substitution to manufacture RA-SCC significantly improves the sustainability of SCC by minimizing the depletion of cement and non-renewable natural resources.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.787-795
• /
• 2003

Mechanical properties of the materials used for transportations and industrial machinery under high strain rate loading conditions such as seismic loading are required to provide appropriate safety assessment to these mechanical structures. The Split Hopkinson Pressure Bar (SHPB) technique with a special experimental apparatus can be used to obtain the material behavior under high strain rate loading conditions. In this paper, dynamic deformation behaviors of the aluminum alloys such as A12024-T4, A1606 IT-6 and A17075-T6 under both high strain rate compressive and tensile loading conditions are determined using the SHPB technique.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.91-96
• /
• 2010

유압호스는 적용되는 압력에 따라서 저압, 중압, 고압으로 구분되어진다. 승용차의 파워스티어링 시스템은 저압부와 고압부 시스템으로 구분되어질 수 있다. 본 연구의 목적은 차량이 회전할 때 발생되는 충격압력이 고압호스부에 적용될 때 수명을 예측하는 것이다. 내부와 외부 조건을 조절하기 위해서 충격 압력과 작동유의 온도는 충격압력 시스템에서 제어되는 것이 필요하다. 충격압력 시험에서 압력과 작동유 온도만을 조절하여 얻은 결과는 고압호스의 수명을 예측하기 위한 조절형 가속수명시험을 적용하였으며, 또한 유한요소법으로 스웨이징부를 해석하였다.

• 한국항공우주학회지
• /
• 제41권8호
• /
• pp.619-624
• /
• 2013

확률론적 수명예측은 파라미터들의 불확실성에 대하여 확률론적인 요소를 적용한다. 따라서 기존의 결정론적 수명해석 기법에 확률론적 기법을 적용하기 위해서는 파손확률을 이용한 위험도 평가가 필요하다. 본 연구에서는 항공기 구조물의 확률론적 위험도평가를 수행하기 위하여 파손확률 추정 모델링 기법을 연구하였다. 이를 위해 파라미터들의 확률론적 불확실성을 효과적으로 반영할 수 있는 베이지안 기법을 이용하여 파손확률을 모델링하고 실험 데이터를 이용하여 검증하였다. 연구결과 베이지안 기반의 파손확률 추정 모델링은 정량적인 파손확률을 계산하고 확률론적 위험도평가를 효과적으로 수행할 수 있음을 입증하였다.

• Nuclear Engineering and Technology
• /
• 제49권2호
• /
• pp.411-425
• /
• 2017

Using a probabilistic safety assessment, a risk evaluation framework for an aircraft crash into an interim spent fuel storage facility is presented. Damage evaluation of a detailed generic cask model in a simplified building structure under an aircraft impact is discussed through a numerical structural analysis and an analytical fragility assessment. Sequences of the impact scenario are shown in a developed event tree, with uncertainties considered in the impact analysis and failure probabilities calculated. To evaluate the influence of parameters relevant to design safety, risks are estimated for three specification levels of cask and storage facility structures. The proposed assessment procedure includes the determination of the loading parameters, reference impact scenario, structural response analyses of facility walls, cask containment, and fuel assemblies, and a radiological consequence analysis with dose-risk estimation. The risk results for the proposed scenario in this study are expected to be small relative to those of design basis accidents for best-estimated conservative values. The importance of this framework is seen in its flexibility to evaluate the capability of the facility to withstand an aircraft impact and in its ability to anticipate potential realistic risks; the framework also provides insight into epistemic uncertainty in the available data and into the sensitivity of the design parameters for future research.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.269-274
• /
• 2008

For fitness-for-service analyses of underground natural gas pipelines, engineering assessment methods against possible defects need to be developed. The assessment methods for high pressure pipeline of KOGAS, was developed using the full size pipe burst tests and the finite element analysis. It included the defect assessment methods for a single and multi-corrosion, corrosion in girth welding part, corrosion in seam welding part, the mechanical damage defects as dent and gouge, crack and large plastic deformation of API 5L X65 pipe. In addition, we developed method to assess pipeline integrity by internal and external load to buried pipeline. Evaluation results were compared with other methods currently being applied to the gas pipeline. The program of Windows environment is made for easily using assessment methods. It provides a consistent user interface, so non-professional technician can easily and friendly use the FFS program from company intranet. Several evaluation programs is easily installed using one installer. Each program constitutes a common input interface and the output configuration program, and evaluation result store and can be recalled at any time. The FFS program based on independent evaluation method is used to evaluate the integrity and safety of KOGAS pipeline, and greatly contribute to safe and efficient operation of pipeline. This paper presents experimental, analytical and numerical investigations to develop the FFS methods for KOGAS pipeline, used as high pressure natural gas transmission pipeline within KOREA. Also, it includes the description of the integrated program for FFS methods.

• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.680-689
• /
• 2010

The crack-tip stress fields and fracture mechanics assessment parameters for a surface crack, such as the elastic stress intensity factor or the elastic-plastic J-integral, can be affected significantly by the adjacent cracks. Such a crack interaction effect due to multiple cracks can alter the fracture mechanics assessment parameters significantly. There are many factors to be considered, for instance the relative distance between adjacent cracks, the crack shape, and the loading condition, to quantify the crack interaction effect on the fracture mechanics assessment parameters. Thus, the current assessment codes on crack interaction effects (crack combination rules), including ASME Sec. XI, BS7910, British Energy R6 and API 579-1/ASME FFS-1, provide different rules for combining multiple surface cracks into a single surface crack. The present paper investigates crack interaction effects by evaluating the elastic stress intensity factor and the elastic-plastic J-integral of adjacent in-plane surface cracks in a plate through detailed 3-dimensional elastic and elastic-plastic finite element analyses. The effects on the fracture mechanics assessment parameters of the geometric parameters, the relative distance between two cracks, and the crack shape are investigated systematically. As for the loading condition, an axial tension is considered. Based on the finite element results, the acceptability of the crack combination rules provided in the existing guidance was investigated, and the relevant recommendations on a crack interaction for in-plane surface cracks are discussed. The present results can be used to develop more concrete guidance on crack interaction effects for crack shape characterization to evaluate the integrity of defective components.