A total of 582 gilts and barrows were analyzed to investigate the regressive relationships to slaughter weight (SW) of variables related to production efficiency and pork quality. Average initial weights and SW were 88.6 and 122.5 kg, respectively, for gilts and 88.7 and 121.4 kg, respectively, for barrows. Average daily gain and gain:feed ratio were not affected by SW. Backfat thickness, which was significantly greater (p<0.01) in barrows (23.3 mm) than in gilts (20.7 mm), increased with increasing SW (0.21 mm/kg; p<0.001). When the 4-notch carcass yield and quality grades were quantified according to an arbitrary 1 point-per-1 notch scale, the former, but not the latter, regressed on SW (-0.64/10 kg; p<0.01). The percent yield of the belly per total lean (overall mean=20.7%) increased with increasing SW (0.37%/10 kg; p<0.001), whereas in other cuts, the SW effect was negligible. The redness of the loin also increased with increasing SW (p<0.05), but other physicochemical characteristics were minimally influenced by SW. In sensory evaluation, effects of SW for fresh and cooked loin, ham, and belly were mostly considered insignificant in terms of quality, albeit statistically significant in several cases. However, positive regressions on SW (p<0.01) of the marbling and acceptability scores of fresh loin as well as the fat:lean ratio of fresh belly were noteworthy. Collectively, SW of approximately 125 kg was maximal for both sexes under the current carcass yield grading, in which 94 kg is the upper weight limit for grade A carcass. However, if the carcass weight limit of the grading was to be removed or broadened, the SW for gilts (but not that for barrows because of their excessive fat content at above 125-kg SW) could be increased to 135 kg or greater without compromising carcass quality.
To investigate the practical assessing method of pork quality, 302 carcasses were selected randomly to represent commercial conditions and were probed at 24 hr postmortem (PM) by Danish Meat Quality Marbling (MQM), Hennessy Grading Probe (HGP), Sensoptic Resistance Probe (SRP) and NWK pH-K21 meter (NpH). Also, filter paper wetness (FPW), lightness (L*), ultimate pH (pHu), subjective color (SC), firmness/wetness (SF) and marbling scores (SM) were recorded. Each carcass was categorized as either PSE (pale, soft and exudative), RSE (Reddish-pink, soft and exudative), RFN (reddish-pink, firm and non-exudative) or DFD (dark, firm and dry). When discriminant analysis was used to sort carcasses into four quality groups the highest proportion of correct classes was 65% by HGP, 60% by MQM, 52% by NpH and 32% by SRP. When independent variables were combined to sort carcasses into groups the success was only 67%. When RSE and RFN groups were merged so that there were only three groups (PSE, RSE+RFN, DFD) differentiating by color MQM was able to sort the same set of data into the new set of three groups with 80% accuracy. The proportions of correct classifications for HGP, NpH and SRP were 75%, 61% and 35% respectively. There was a decline in predication accuracy when only two groups, exudative (PSE and RES) and non exudative (RFN and DFD) were sorted. However, when two groups designated PSE and non-PSE (RSE, RFN and DFD) were sorted then the proportion of correct classification by MQM, HGP, SRP and NpH were 87%, 81%, 71% and 66% respectively. Combinations of variables only increased the prediction accuracy by 1 or 2% over prediction by MQM alone. When the data was sorted into three marbling groups based on SM this was not well predicted by any of the probe measurements. The best prediction accuracy was 72% by a combination of MQM and NpH.
Feedlot and in vitro ruminal experiments were conducted to assess the effects of saponin-containing surfactant applied during tempering of barley grain on cattle growth performance and on ruminal fermentation. In the feedlot experiment, treatments with three barley grain/barley silage based diets were prepared using barley grain at 7.7% moisture (dry, D), after tempering to 18% moisture (M), or after tempering with a saponin-based surfactant included at 60 ml/t (MS). Each treatment was rolled at settings determined previously to yield optimally processed barley. A total of 180 newly weaned British${\times}$Charolais steers were fed three diets in 18 pens for a 63-d backgrounding period and 91-d finishing period to determine feed intake, growth rate and feed efficiency. Cattle were slaughtered at the end of the experiment to measure the carcass characteristics. Tempering reduced (p<0.001) volume weight and processing index, but processing characteristics were similar between MS and M. Tempering increased (p<0.05) growth during backgrounding only, compared with D, but did not affect feed intake in either phase. During backgrounding, feed efficiency was improved with tempering, but during finishing and overall this response was only observed with the surfactant. Tempering did not affect carcass weight, fat content or meat yield. Surfactant doubled the proportion of carcasses grading AAA. In the in vitro experiment, barley (500 mg; ground to <1.0 mm or steam-rolled) was incubated in buffered ruminal fluid (40 ml) without or with surfactant up to 20 ${\mu}l/g$ DM substrate for 24 h. Surfactant increased (p<0.05) apparent DM disappearance and starch digestibility but reduced productions of gas and the volatile fatty acid and acetate:propionate ratio, irrespective of barley particle size. Compared with feeding diets prepared with non-tempered barley, tempering with surfactant increased the feed efficiency of feedlot steers. This may have arisen from alteration in processing characteristics of barley grain by surfactant rather than its direct effect on rumen microbial fermentation.
This study was conducted to make certain that the intramuscular fat score at 13th rib could represent the fat content of whole loin from Hanwoo in Korea beef grading system. A total 42 loins from 23 carcasses of grade $1^{{+}{+}}$, 16 carcasses of grade $1^+$, and 3 carcasses of grade 1 of Hanwoo were used for this study. The crude fat content and intramuscular fat score at the $1^{st}$, $6^{th}$, and $13^{th}$ rib, and the last lumbar position of loin were measured. The crude fat content was the highest at the $6^{th}$ rib of loin from the carcasses of grade $1^{{+}{+}}$ and $1^+$ (p<0.05). There were no significant difference of the intramuscular fat scores measured by image analysis and beef marbling score (BMS) between the 6th and $13^{th}$ rib of loin from the carcasses of $1^{{+}{+}}$ and $1^+$ and that were significantly higher than intramuscular fat scores at the $1^{st}$ rib and the last lumbar position of the loin. From the results, we conclude that the intramuscular fat score at the $13^{th}$ rib can represent the fat content of loin when meat graders decide the grade of Hanwoo carcass.
Park, B.Y.;Cho, S.H.;Kim, J.H.;Lee, W.S.;Kim, Y.K.;Ahn, C.N.;Kim, J.M.;Yoon, S.G.
Journal of Animal Science and Technology
/
v.45
no.1
/
pp.151-156
/
2003
This study was conducted to provide the information for the carcass grading properties of imported beef cattles fed in Korea. The cattles from 4 different breed such as Hereford, Angus, Murray Grey, Hereford${\times}$Angus were imported and slaughtered at 700kg(24 month). The Yield and Quality grading characteristics for 10 cattles from each breed were evaluated. Carcass weight of Murray Grey was lower than the other breed(p<0.05). The thickness of backfat was the lowest for Hereford(13.7mm) and followed by Hereford${\times}$Angus(17.30mm), Angus(18.20mm) and Murray Grey(18.90mm). Hereford had the highest Yield index(64.63%) and Murray Grey had the lowest Yield index(62.43)(p<0.05). The frequency percentages of marbling degree for Angus having the 1++ over degrees were 50% which was the highest among the breed. In the frequencies of final carcass grades, Hereford produced 30% of B grade and 70% of C grade in Yield grade and the 3 grade produced in Quality grade. All carcasses of Angus were graded as the grade C in Yield grade and 20% carcasses of Angus had the 2 grade and 80% carcasses had the 3 grade in Quality grade. Murray Grey produced 10% of grade B and 90% of grade C in Yield grade and produced 10% of the 2 grade and 90% of the 3 grade in Quality grade. The Hereford${\times}$Angus produced 100% of grade C in Yield grade and 100% of the 3 grade in Quality grade.
This experiment was conducted to investigate the changes of pork meat quality characteristics exposed to ozone gas for 5, 10, and 15 min and then vacuum packaged during storage for 0, 5, 10, 15, and 20 day at $4^{\circ}C$. The ozone gas exposed groups of pork loin cuts (OZM) had slightly higher pH value compared to the control at day 0 and 5 (p<0.01). The 15 min exposure of ozone gas groups showed significantly (p<0.01) higher TBARS value than that of control at the day 15 and 20. However, there was no significant difference in all groups at day 0,5, and 10. The CIE $L^*$ and $b^*$ values of OZM showed no significant difference between control and ozone gas treated groups during storage. The loin cut color of ozone gas exposure for 15 min had significantly lower CIE $a^*$ values than the other groups at day 0,5, and 15 (p<0.01). The aerobic plate count and coliform bacteria count of pork loin cuts exposed ozone gas significantly (p<0.01) was reduced at day 0 by about $0.45-1.04\;log_{10}CFU/g$ and $0.26-0.30\;log_{10}CFU/g$, respectively. As ozone gas exposure time extended, the aerobic plate count and coliform bacteria count of OZM were increased at day 0, 5, and 10 (p<0.01). However, there were no significant differences observed among groups at day 20 in the counts of aerobic and coliform bacteria. In conclusion, the meat cuts exposed to ozone gas for 5 and 10 min before packing may be a reasonable packing method regarding the effects of ozone level on meat oxidation, color change and microbial reduction.
The objective of this study was to investigate the relationship between color grade in Korea Institute for Animal Products Quality Evaluation (KAPE) and instrumental color values ($L^*$, $a^*$, $b^*$, ${\Delta}C$ and H) in porcine longissimus dorsi muscle. A total of 538 pigs were selected to classify and to measure the instrumental color values from commercial public slaughter house. All of the instrumental color traits were decreased with increase of color grade (p<0.05). The color grade 1 group had the highest $L^*$ value (65.23) and the color grade 6 group had the lowest $L^*$ value (45.29) among the color grade groups (p<0.05). The color grade had the negative correlation with all the instrumental color traits (p<0.001) and the correlation coefficient between color grade and $L^*$ value was -0.83. In conclusion, instrumental color traits is highly related to color grade, and especially $L^*$ value is an important indicator for both porcine carcass grading and color grading systems in KAPE.
Journal of the Korea Academia-Industrial cooperation Society
/
v.22
no.3
/
pp.446-452
/
2021
As a higher standard for food consumption is required, the consumption of chicken meat that can satisfy the subdivided food preferences is increasing. In March 2003, the quality criteria for chicken carcasses notified by the Livestock Quality Assessment Service suggested quality grades according to fecal contamination and the size and weight of blood and bruises. On the other hand, it is too difficult for human inspection to qualify mass products, which is key to maintaining consistency for grading thousands of chicken carcasses. This paper proposed the computer vision algorithm as a non-destructive inspection, which can identify chicken carcass parts according to the detailed standards. To inspect the chicken carcasses conveyed at high speed, the image calibration was involved in providing robustness to the side effect of external lighting interference. The separation between chicken and background was achieved by a series of image processing, such as binarization based on Expectation Maximization, Erosion, and Labeling. In terms of shape analysis of chicken carcasses, the features are presented to reveal geometric information. After applying the algorithm to 78 chicken carcass samples, the algorithm was effective in segmenting chicken carcass against a background and analyzing its geometric features.
Kim, Dong Jun;Kim, Da Hye;Kang, Se Joo;Kwon, Ki Mun;Lee, Jae Cheong;Lee, Kyung-Woo
Korean Journal of Poultry Science
/
v.45
no.1
/
pp.63-71
/
2018
This study was conducted to evaluate the effect of age of laying hens on egg internal and external qualities. A total of 8,300 eggs were randomly collected from 15 grading & packaging (GP) centers, and 50 eggs per farm during April to May in 2015. Age of laying hens ranged from 18 to 65 weeks of age and they were classified into 5 age groups (18~25, 26~35, 36~45, 46~55, and 56~65 weeks). Egg weight increased, but the Haugh unit decreased as the age of laying hens increased. Yolk color was higher in eggs laid from 25~35 weeks of laying hens compared with that of 18~25-weeks-old chickens. The incidence of dirty eggs was highest (P<0.05) in 18~25 week group and remained constant after 26 weeks. Among eggshell defects, speckled and pimpled eggs increased as the age of laying hens increased. The incidence of calcium deposits and misshapen eggs was highest during 18~25 weeks of age and remained constant after 26 weeks. The percentage of total eggshell cracks increased as the age of laying hens increased. Among eggshell cracks, star- and hair-like cracks were frequently noted. The percentage of meat spot was higher than that of blood spot and their incidence was highest among the 56~65 week group. Age of laying hens significantly increased egg weight, incidence of pimpled or speckled eggs, star- or hair-like cracks, and meat spot. On the other hand, a significant negative interaction between age of laying hens and the Haugh unit was noted. In conclusion, our study revealed that the age of laying hens affected internal and external egg qualities.
This current survey was conducted to examine consumer attitudes toward factors determining beef purchasing and improving distribution systems. The frequency of beef purchasing was shown to reflect social and economic status, where inhabitants in large cities, such as Seoul, with higher salaries showed a higher frequency. In addition, consumers that were in their forties bought beef more frequently than consumers that were in their twenties. Consumers in Seoul and the megalopolis with a monthly income of higher than 200 million won preferred to purchase meat from department stores and discount markets. In contrast, people in small cities with lower incomes tended to buy meat from butcher shops and brand shops. In a question regarding unsatisfaction factors of retail beef, individuals that were in their thirties with a high income had concerns associated with packaging problems. For people under thirty with low income, the consistency of quality and price were the prime concerns. In regards to the beef grading system, consumer response varied between inhabitants, monthly income and age group, where consumers from small cities that were in their twenties and forties with a low income had a negative viewpoint. For the differential beef distribution system, housewives between the ages of 30 and 40 from a small city with an income higher than 200 million won had a positive response; however, a large number of consumers were not familiar with this system. The most demanding beef cuts were in the following order: loin, flank and rib. In addition, the most important factors determining purchasing beef were as follows: price, breed and portion.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.