• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2004

The failure of cut slopes frequently occurs particularly during the thawing season and the rain season in summer. This study interpreted data collected from site to which a real-monitoring system was applied in order to analyze the causes of ground behaviors and to forecast future slope failure. As for research methods, this study analyzed the size and mechanism of failure by integrating the results of field surveys and measurements. Furthermore, it analyzed data transmitted by the monitoring system installed in the a result, three times of ground displacement occurred as well as a number of partial tension cracks. The cut slope composed of sandstone and siltstone started its initial behavior as a result of torrential downpour and the loss of support of the substructure. For quantitative analysis of the characteristics of ground behavior, this study measured 5 lateral lines. According to the result of the measurement, displacement happened little in the section to which countermeasure had been applied, but displacement of maximum 400mm happened in the section to which countermeasure had not bee applied. The analysis of data on displacement and rainfall suggested a close relationship between ground behavior and rainfall. According to the result of stability interpretation along with the change of ground saturation, stability rate appeared to be less than 1.0 when ground saturation is over 55%. Although the current trend of ground behavior is at a stable stage falling within the range of tolerance, it is considered necessary to continue monitoring and data analysis because ground displacement is highly possible with the change of temperature during the winter.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.127-136
• /
• 2008

Geophysical survey for establishing a wide site for the distribution of water content, wetting front infiltration due to the rainfall, and distribution of groundwater level has been performed by using 8round penetration radar (GPR) method, electrical resistivity method, and so on. On the other hand, a narrow area survey was performed to use a permittivity method such as time domain reflectometry, frequency domain reflectometry, and amplitude domain reflectometry methods for estimating volumetric water content, soil density, and concentration of contaminant in surface and subsurface. The permittivity methods establish more corrective physical parameters than different found survey technologies mentioned above. In this study for establishment of infiltration behaviors for wetting front in the unsaturated soil caused by an artificial rainfall, soil physical parameters for volumetric water content, pore water pressure, and pore air pressure were measured by FDR measurement device and pore water pressure meter which are installed in the unsaturated weathered granite soil with different depths. Consequently, the authors were proposed to a new establishment method for analyzing the variations of volumetric water content and wetting front infiltration from the responses of infiltrating pore water in the unsaturated soil.

• The Journal of Engineering Geology
• /
• v.27 no.2
• /
• pp.119-124
• /
• 2017

The waviness of Large Discontinuity rock is the one of important elements that judges the stability of rock slope. When the waviness of large discontinuity is measured in the field, there are many limitations Therefore this research was carried out to measure waviness of large rock discontinuities using 3D laser scanner to supplement this problem. This research established one 3D model that actual X, Y and Z coordinates through the integrated data gained from one that calculates waviness of base lock using CAD program was compared and analyzed to that of disc-clinometer. As its results, the high reliability of results could be recognized as it belongs to mechanical tolerance $1{\sim}2^{\circ}$ and the results belong to the measured values of Mean DIP and Mean are all within $1^{\circ}$. So, the investigation method of waviness of large discontinuity rock face using 3D laser scanner was verified as more prompt, effective and reliable method than conventional direct site measuring method.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.442-450
• /
• 2014

Concern has grown over a presence of micropollutants in natural water since sulfonamide antibiotic substances such as sulfamethazine, sulfamethoxazole, sulfathiazole have been frequently detected in Nakdong River, Korea. The current work investigates the degradation of the three sulfonamide substances by using quantum chemistry calculations of density functional theory (DFT) and experimental measurement techniques of Fourier transform infrared spectroscopy (FT-IR) and ultraviolet-visible spectrophotometer (UV-VIS). DFT calculations demonstrate that the lowest energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbitals (LUMO) lies in sulfanilamide functional group of sulfonamide, implying that the sulfanilamide functional group would be the most active site for ozone oxidation. Also, UV-VIS spectra and FT-IR analysis reveal that 260 nm band originated from sulfanilamide group was absent after ozone oxidation, indicating that a functional group of amine (N-H) was removed from sulfanilamide. Both theoretical and experimental observations agree well with each other, demonstrating the DFT calculation tool can be an alternative tool for the prediction of chemical reactions in purification treatment processes.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.514-519
• /
• 2004

Soil samples collected from around the BOMARC Missile Site were measured for their activity concentrations and isotopic ratios of Pu and Am isotopes with particle sizes. The activity concentrations of Pu and Am in the BOMARC soil were remarkably higher than the fallout levels, and the activities decreased nearly exponentially with an increasing particle size of the soil due to a decreasing surface area. The activity ratios of Pu-238 / Pu-239, 240, Pu-241 / Pu-239, 240 and Am-241 / Pu-239, 240 observed in the BOMARC soil were much lower than those attributed to the nuclear reprocess plants and the Chernobyl fallout. Also, the atomic ratio of Pu-240 / Pu-239 in the BOMARC soil was remarkably lower than the fallout value influenced by the nuclear weapons testing and the Chernobyl accident. The atomic ratio of Pu-240 / Pu-239 was so close to the value of the weapons grade Pu released from the crash of a B52 plane in the Thule of the Greenland, such that the Pu isotopes detected in the BOMARC soil could have originated from the weapons grade plutonium.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.1-16
• /
• 2000

It is difficult to treat the endodontic apical perforation successfully. In this study, we hypothesized that the application of PDGF-BB and IGF-I into periapical perforation site may accelerate periapical healing and lead to bone deposition. And the specificity of osteonectin in periapical healing was investigated. The experiments were performed on the upper and lower 51 premolar teeth of 4 beagle dogs. The pulp chamber of each tooth was opened and the dental plaque was inserted into the canal for developing the periapical lesion for 5 weeks. Then, the roots were artificially perforated at the apex with the number 4 profile of .06 taper. In each step, standard periapical radiographs were taken to compare the size of lesion each other. The radiographs were scanned and analyzed by image analysis system. The mean and standard deviation of periradicular radiolucency ratios were calculated in each group. ANOVA was used for comparison. 51 premolars were grouped into 3 groups; control group, calcium hydroxide-treated group and calcium hydroxide plus growth factors-treated group. In the control group, the apical perforations were not sealed and obturated with gutta-percha and ZOE sealer by lateral condensation technique. In the experimental groups, the apical perforation were sealed with calcium hydroxide and with/without $4{\mu}g$ of PDGF-BB & IGF-I in cellulose gel and obturated by lateral condensation technique. Fluorescent bone markers were used to measure new bone formation. Following 2, 4, 12 weeks after experiment the dogs were sacrificed and histologic sections were prepared. Each tooth block including periapical lesion was sectioned mesiodistally. One half of the sections were decalcified with 6% nitric acid and processed by standard paraffin embedding technique. The sections were stained by hematoxylin and eosin, and immunostained for osteonectin. Histomorphometrical measurement of neoformed bone was performed using a light microscope. And the other half of the sections were prepared by undecalcified preparation, and confocal laser scanning microscopic investigations were done.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.339-349
• /
• 2007

For various types of the Pungchon limestone, diverse mineral characters of the limestone including their size and morphology are investigated by using of ELS and SEM to examine the possibility of application as fillers to paper industry. Also, the measurement of zeta potential and the evaluation of coagulation properties in calcite suspension was made for fine powders of the limestone to examine the applicability and efficiency in wet-papermaking process. Fine powder of the Pungchon lime-stone, largely controlled by original mineral characters of ore in mineralogical aspects, exhibits some-what different trend in particle morphology according to ore types, and thereby, the size distribution, zeta potential and coagulation properties also become different. The examined whiteness, brightness, opacity and sheet strength in hand sheet also show remarkable differences according to ore types. These are seemed to be basically due to the results of combined effects of whiteness, site distribution, refractive index, and morphology of the limestone powder on the properties of hand sheet. Considering the investigated results, all types of the Pungchon limestone appear to be sufficiently applicable to paper industry. Especially, the mega-crystalline calcite type is evaluated to be overall suitable for the purpose of paper industry due to the higher values in whiteness and brightness. In addition the fine powder of micro-crystalline calcite type is assessed particularly to have a good quality in sheet strength by virtue of irregular particle shape.

• Korean Journal of Ecology and Environment
• /
• v.42 no.1
• /
• pp.124-133
• /
• 2009

Effects of substrates on the relative immigration activities (RIAs) of epilithic diatoms were examined in Sum River, a tributary of South Han River, Korea. Two hundreds of tile substrates coated with 5% agar were deposited at seven study stations (30 tiles per site) for one month from March 7 to April 7, 2008. Water sampling, physico-chemical factor measurement, and diatom analysis were performed in the field and laboratory. Over the study, major epilithic diatom species were Nitzschia amphibia, Navicula subminuscula, Cymbella minuta in both the natural and artificial substrates. Two dominant species, Nitzschia amphibia and Cymbella minuta often found at seven stations. Among all observed taxa, Nav. subminuscula and Caloneis silicula showed the highest RIA, with the value over 15 throughout the study. Regarding the algal morphology, the biraphe type species showed higher RIA than any other morph, while they comprised over 55% of total biomass, indicating a density effect. Additionally, a significant relationship between RIA and 20-day deposited substrate (p<0.05) showed in two diatom species, Nitzschia fonticola, Gomphonema quadripunctatum, which showed relatively high RIAs. These results indicate that the relative immigration activities of epilithic diatom species can be influenced by algal density in the water and substrate, nutrients, and deposited time at least 20 days.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup1
• /
• pp.120-123
• /
• 2001

Objectives : The present study was performed to analyze results of hydroxyurea treatment for unresectable and recurrent meningiomas as adjuvant chemotherapeutic agent. Material and Methods : Among 87 cases of meningioma patients who treated surgically between Jauary 1988 and December 1997 in our department, unresectable and recurrent cases were 4 cases. Histologically, 3 cases were meningothelial type, 1 case was angiomatous type. Tumor orgin was cerebellopontine angle(CPA) in 3 cases, cavernous sinus in 1 case. Three of 4 cases received radiation treatment. All patients received a daily dosage of 20mg/kg/day of hydroxyurea. Hematological monitorning was performed monthly and tumor measurement was assessed by MR imaging before treatment and every 6 months. Mean follow-up period was 34 months. Rerults : All cases showed no enlargement of tumor mass without any shrinkage. Trigeminal neuralgia in 1 case was improved and external herniation of brain on craniectomy site in 1 case was shrunken. None of the patients had any serious side effects. White blood cell count fell below $3000/{\mu}l$ in 1 case, but recovered 2 weeks later with cessation of medication. Conclusion : Hydroxyurea stopped cell growth by triggering the apoptotic cascade. Our preliminary data indicate that hydroxyurea provides adjuvant medical treatment in patients of unresectable and recurrent meningiomas

• Journal of the Korean Geophysical Society
• /
• v.5 no.1
• /
• pp.9-18
• /
• 2002

We performed a long-term monitoring of self-potential(SP) using the Cu-CuSO₄non-polarizable electrode and copper-clad electrodes(CCE) in a test site in order to analyze the effects of surrounding environmental noises such as temperature, rainfall and soil moisture content on the electrodes. Analysis of the temperature dependence of the non-polarizable electrodes showed that is temperature coefficient was about +0.5 mV/°Fwhen its end was exposed to atmosphere while it was less than +0.5 mV/℃ when submerged into the subsurface, which reflects that there exists an 8 to 11 hour lag between temperatures at the depth of 15 cm and atmosphere. CCE was independent of atmospheric temperature in subsurface but showed temperature coefficient of 1.0 mV/℃ when exposed to atmosphere. Drifts of 1 to 2 mV recorded with the non-polarizable electrode directly related to the soil moisture content when it was buried in subsurface. Drift with CCE also showed similar trend to the soil moisture content, and 5 mV drift was recorded according to 5% of daily variation. The soil moisture content had strong effects on the measurement with CCE in rainfall since the flow potential is generated on the surface of the electrode.