• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.10-17
• /
• 2009

야간경관에는 수많은 광원(光源)에 의해 다양한 휘도(Luminance)로 나타난다. 휘도를 측정하는데 있어 측정 범위가 한정되어 있다. 기존의 휘도계를 이용한 측정방식은 하나의 점을 통한 점(Point)측정방식이기 때문이다. 야간경관의 휘도를 쉽고 편리하게 정보를 얻고자 휘도 측정에 있어 DSLR 카메라를 이용하게 되었다. 현재 광학의 기술로 인해 디지털 카메라의 활용가치가 매우 크며 쉽게 이미지데이터를 얻을 수 있다. 이러한 디지털 이미지로부터 야간경관의 휘도 분석과 DSLR 카메라의 면(Scene) 측정방식을 통한 휘도 측정 기법에 대해 제안하고자 한다.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.30-37
• /
• 2011

Binocular-pair images obtained from two cameras can be used to calculate the three-dimensional (3D) world coordinate of a feature point. However, to apply this method, measurement accuracy of binocular vision depends on some structure factors. This paper presents an experimental study of measurement distance, baseline distance, and baseline direction. Their effects on camera reconstruction accuracy are investigated. The testing set for the binocular model consists of a series of feature points in stereo-pair images and corresponding 3D world coordinates. This paper discusses a method to increase the baseline distance of two cameras for enhancing the accuracy of a binocular vision system. Moreover, there is an inflexion point of the value and distribution of measurement errors when the baseline distance is increased. The accuracy benefit from increasing the baseline distance is not obvious, since the baseline distance exceeds 1000 mm in this experiment. Furthermore, it is observed that the direction errors deduced from the set-up are lower when the main measurement direction is similar to the baseline direction.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.692-698
• /
• 2022

With the expansion of domestic hydrogen fuelling station infrastructure, it is necessary to secure reliability among hydrogen traders, and for this, technology to accurately measure hydrogen is important. In this study, 4 types of hydrogen trading volume calculation models (model 1-4) were presented to improve the accuracy of the hydrogen trading volume. In order to obtain the reference value of model 4, and experiment was conducted using a flow rate measurement equipment, and the error rate of the calculated value for each model was compared and analyzed. As a result, model 1 had the lowest metering accuracy, model 2 had the second highest metering accuracy and model 3 had the highest metering accuracy until a certain point. But after the point, model 2 had the highest metering accuracy and model 3 had the second metering accuracy.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.69-79
• /
• 1989

Cutting tool life monitoring is a critical element needed for designing unmanned machining systems. This paper describes a tool wear measurement system using computer vision which repeatedly measures flank and crater wear of a single point cutting tool. This direct tool wear measurement method is based on an interactive procedure utilizing a image processor and multi-vision sensors. A measurement software calcultes 7 parameters to characterize flank and crater wear. Performance test revealed that the computer vision technique provides precise, absolute tool-wear quantification and reduces human maesurement errors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1018-1021
• /
• 2009

Define a designated eye position (DEP) for the 3D displays is a critical issue. It shows the system performance without content issue. We use luminance meter to capture these optical characteristic and discuss between one point measurement, two points measurement and three points measurement situation.

• 한국조경학회지
• /
• 제22권4호
• /
• pp.75-80
• /
• 1995

It is important to estimate the possibility of recovery in physiologically damaged woody plant. It is suggested that C.E.R(cambial electrical resistance) might be a useful method to predict the permanent wilting point. D/A and A/D converter can be used to measure the C.E.R and it took only 10-20 msec for a measurement and the values were stable during this study. A computer could be used for the continual measurement of C.E.R. There were very big daily changes of C.E.R. was changed according to the changes of indoor temperature, but the phase was slightly different. It is reasoned that daily changes in C.E.R. is induced by the changes of water potential and cambial thickness. It was difficult to detect the changes of C.E.R. caused by changes in soil moisture under high soil water potential. Under low soil water potential, the changes in soil moisture under high soil water potential. Under low soil water potential, the changes of C.E.R. can be detected. After wilting, C.E.R. is increased very rapidly. When C.E.R. is not decreased by watering, it will be permanent wilting point. But it takes several days to confirm the permanent wilting point. To predict the possibility of recovery from wilting, the values of C.E.R. have no meaning. But the changes of C.E.R. are significant. Therefore we can predict the permant wilting point in woody plant by monitoring the change of C.E.R. by the computer.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.416-423
• /
• 2012

액체추진제 공급시스템의 액체포집장치는 추진기관으로 기포가 유입되는 것을 방지하는데 사용한다. 액체포집장치는 차단막의 미세 구멍의 모세관 효과를 이용하여 추진기관에 순수 액체만을 공급한다. 기포점은 액체포집장치의 설계에서 가장 중요한 설계변수이다. 본 논문에서는 문헌조사를 통해 액체포집장치의 성능에 영향을 미치는 변수들을 식별하고 기포점 측정 시험 장치를 구성하였다.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.1-7
• /
• 2011

In the performance test for wind turbines of medium and large, The reference met-mast should be installed for measurement reference wind speed as IEC 61400-12-1 standards and design of booms for mounted an anemometer must be considered exactly. Boom-mounted cup anemometer are influenced by flow distortion of the mast and the boom. Therefore design of booms must be important so that flow distortion due to booms should be kept below 0.5%. But, in some cases at size of met-mast structure, the distance of boom from mast is longer then measurement of wind speed is impossible because of oscillation of boom-mounted anemometer. In this paper, We measured a wind speed at several point from mast and boom and we analyzed the error of wind speed at each point of measurement. Also, we will suggest a correction method using the data curve fitting about errors of wind speed between each point of mounted anemometer.

• 한국측량학회지
• /
• 제22권2호
• /
• pp.179-186
• /
• 2004

본 연구는 산업 사진측량을 이용하여 자동차의 외형을 정밀 측정하고, 사고 등의 원인으로 변형이 발생하였을 때 변형량을 측정하는 방법에 관한 것이다. 자동차의 외형을 정밀 측정하기 위하여 점군데이터를 취득할 수 있는 프로젝션 타겟을 사용함으로써 보다 곡면에 대한 정밀한 측정이 가능하도록 하였으며, 대상물 촬영 및 좌표해석을 통하여 타겟의 3차원 좌표를 취득하였다. 취득된 점군데이터는 불규칙 삼각망으로 표면을 형성하여 3차원 모델링을 하였다. 또한, 변형 발생부위를 정밀 측정함으로써 교통사고 분석 등에 효율적이고 정밀한 데이터를 제공할 수 있을 것이다.

• 한국지능시스템학회논문지
• /
• 제26권4호
• /
• pp.321-326
• /
• 2016

본 논문에서는 휴대용 휘도측정시스템의 측정위치기반 휘도보정알고리즘을 제안한다. 측정거리와 측정각도에 따라 휘도 값은 변화하며, 측정거리와 측정각도를 고려한 알고리즘을 적용하여 기존에 개발된 영상기반 휘도측정시스템의 오차를 개선한다. 카메라 영상기반의 휘도 정보를 정확하게 획득하는 면측정방법을 제안하기 위해서 점휘도계로 측정대상물과의 측정각도에 따른 휘도 값의 변화를 측정한다. 측정거리, 측정각도와 휘도 값 간의 연관성을 수식으로 나타내었고, 측정위치를 고려한 알고리즘을 제안한다. 실험용 간판을 대상으로 점휘도계와 제안한 휘도측정시스템을 비교 평가 실험하고 제안한 휘도측정시스템의 성능을 검증하였다.