• 제목/요약/키워드: measurement instrument

검색결과 982건 처리시간 0.028초

근내지방도가 높은 수입 등심육과 한우육의 육질특성 비교 (Meat Quality of Highly Marbled Imported Beef with Reference to Hanwoo Beef)

  • 황인호;박범영;조수현;김진형;이종문
    • Journal of Animal Science and Technology
    • /
    • 제46권4호
    • /
    • pp.659-666
    • /
    • 2004
  • 본 연구는 근내지방도가 높은 냉장 수입육과 한우 1등급 및 3등급육의 육질 비교를 위해 실시하였다. 쇠고기 전문점에서 화우(Wagyu) 4두, 엥거스(Angus) 4두, 한우 1등급 4두와 한우 3등급 3두의 등심육을 구입하여 시료로 이용하였다. 화우, 엥거스, 한우 1등급과 3등급의 근애지방 함량은 각각 22‘ 8, 13 및 4%였고, 숙성기간은 31, 71, 14 및 14일 이였다. 한우 등급간 또는 수입욱간의 육질 차이는 없었다. 수입육은 한우보다 유의적으로(P<0.05) 낮은 전단력을 보였다. 하지만 관능평가의 연도와 다즙성에는 위 내가지 육질사이에 차이점이 관찰되지 않았다. 한편, 한우가 향미에서 유의적으로(P<0.05) 높은 점수를 받아, 요리된 고기의 향이 더 우수한 것으로 평가되었다. 축종, 사양방법, 숙성일 차이 중 어떤 요인이 본 실험결과에 영향을 주었는가에 대한 의문이 남아있다. 하지만 이 결과는 높은 근내지방을 함유한 수입육 보다 한우고기가 더 우수한 관능 특성을 가졌다는 것을 단편적으로 보여주고 있다. 판별력 분석에서 수입육과 한우육을 분별하는 지방산은 C18:0, C18:ln-7, C18:ln-9, C20:3n-6, C20:4n-6 and n-3으로 나타났다. 하지만 수입육과 한우육에서 이 지방산들의 차이는 C18:0에서만 관찰되었다. 선별된 지방산들과 향미의 상호관계를 관찰하기 위해 주요인 분석을 실시한 결과 C18:0(P<0.05)와 C18:ln-7(P<0.1)가 향미와 음의 상관관계를 보였다. 본 연구의 결과는 한우고기가 더 높은 근내지방을 함우한 냉장 수입육보다 더 우수하다는 것을 시사하고, 낮은 양의 C18:0가 이와 관련된 후보 지방산이 될 수 있다는 것을 시사한다. 한우고기 차별화를 위해 본 결과가 축종, 사양방법 또는 도축 후 처리의 어떤 요인들과 관련되어 있는가에 대한 연구가 요구도된다.

LC/TOFMS를 이용한 생체시료의 내인성 대사체 분석법 개발 (Method Development for the Profiling Analysis of Endogenous Metabolites by Accurate-Mass Quadrupole Time-of-Flight(Q-TOF) LC/MS)

  • 이인선;김진호;조수열;심선보;박혜진;이진희;이지현;황인선;김성일;이정희;조수연;최돈웅;조양하
    • 한국식품위생안전성학회지
    • /
    • 제25권4호
    • /
    • pp.388-394
    • /
    • 2010
  • Metabolomics aims at the comprehensive, qualitative and quantitative analysis of wide arrays of endogenous metabolites in biological samples. It has shown particular promise in the area of toxicology and drug development, functional genomics, system biology and clinical diagnosis. In this study, analytical technique of MS instrument with high resolution mass measurement, such as time-of-flight (TOF) was validated for the purpose of investigation of amino acids, sugars and fatty acids. Rat urine and serum samples were extracted by selected each solvent (50% acetonitrile, 100% acetonitrile, acetone, methanol, water, ether) extraction method. We determined the optimized liquid chromatography/time-of-flight mass spectrometry (LC/TOFMS) system and selected appropriated columns, mobile phases, fragment energy and collision energy, which could search 17 metabolites. The spectral data collected from LC/TOFMS were tested by ANOVA. Obtained with the use of LC/TOFMS technique, our results indicated that (1) MS and MS/MS parameters were optimized and most abundant product ion of each metabolite were selected to be monitorized; (2) with design of experiment analysis, methanol yielded the optimal extraction efficiency. Therefore, the results of this study are expected to be useful in the endogenous metabolite fields according to validated SOP for endogenous amino acids, sugars and fatty acids.

건설 현장 악력 작업안전 기준 설정에 관한 실험적 연구 (An Experimental Study on Establishing Criteria of Gripping Work in Construction Site)

  • 손기상;이인홍;최만진;안병준
    • 한국안전학회지
    • /
    • 제10권3호
    • /
    • pp.81-95
    • /
    • 1995
  • Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC+has been used for the study.

  • PDF

독도 MIROS Wave Radar를 이용한 파랑관측 및 품질관리 (Measurement and Quality Control of MIROS Wave Radar Data at Dokdo)

  • 전현정;민용침;정진용;도기덕
    • 한국해안·해양공학회논문집
    • /
    • 제32권2호
    • /
    • pp.135-145
    • /
    • 2020
  • 해양에서의 파랑관측은 부이나 압력계 등을 이용하여 수면변위를 관측하는 직접관측방법과 Radar를 이용하여 관측하는 원격관측방법으로 구분된다. 직접관측방법은 정확도가 높지만, 악기상 시 파손 및 유실 위험이 크며 외해 설치 시 많은 유지 보수비용이 필요하다는 단점을 가지고 있다. 반면 Radar와 같은 원격관측방법은 장비를 육지에 계류하여 유지관리가 용이하지만 직접관측방법과 비교하면 정확도가 다소 낮은 단점이 있다. 본 연구에서는 원격파랑관측자료의 품질을 개선하기 위해 독도에 설치되어 운영 중인 MIROS Wave and Current Radar(MWR) 관측자료의 수집 및 분석을 하였으며, 이를 기상청에서 운영 중인 해양파고부이(CWB)의 관측자료와 비교하였다. 그리고 MWR 관측자료의 품질을 개선하기 위해 1) MIROS사에서 개발한 필터(Reduce Noise Frequency, Phillips Check, Energy Level Check)의 복합적인 사용(최적필터; Optimal Filter), 2) OOI(Ocean Observatories Initiative)에서 개발한 Spike Test 알고리즘(Spike Test) 그리고 3) 유의파고-주기 관계식을 이용한 새로운 필터(H-Ts QC)를 사용하여 신뢰도가 낮은 이상자료(Noise; 시계열 자료 중 급격하게 자료가 발산하여 정상자료가 아닌 것으로 판단되는 자료)의 제거 및 보정을 수행하였다. 결과적으로 3가지의 품질관리기법을 적용한 MWR의 파랑관측자료는 유의파고에 대해서는 일정 부분 신뢰도를 가지지만 유의파주기에서는 여전히 오차가 존재하며 이에 대한 개선이 요구된다. 또한, MWR의 파랑관측자료는 3 m 이상의 고파랑에서는 CWB와 다소 양상이 달라지는 한계가 발생하므로 이를 위한 장기간의 원격파랑관측 자료의 수집과 분석, 그리고 필터 개발 등에 관한 지속적인 연구가 필요하다.

의복의 자아 근접성 척도 검증 - 노년층을 대상으로 - (Validation of the Proximity of Clothing to Self Scale for Older Persons)

  • 이영아
    • 한국의류학회지
    • /
    • 제31권6호
    • /
    • pp.848-858
    • /
    • 2007
  • 의복의 자아 근접성 개념을 기반으로 한 여러 연령층의 설문조사 결과를 바탕으로 하여 2004년에 Sontag과 Lee가 객관적 측정도구, 의복의 자아 근접성 척도(PCS Scale)를 개발하였다. Sontag과 Lee는 24-항목을 포함한 4-요인으로 구성된 PCS 척도를 청소년층을 대상으로 타당화 하였다. 본 연구는 그들 연구의 연계로 초기 6-요인으로 구성되었던 PCS 척도를 노년층에 적용하여 19-항목을 포함한 3-요인으로 구성된 PCS 척도를 타당화 한다. 65세 이상의 노인층이 본 연구의 표본집단으로 설정되었고 임의 표집방법을 이용, 미국 전역 1,700명의 노년 표본이 표본조사회사로부터 구입되었다. 2004년 11월 설문조사가 시작되어 2005년 2월에 총 250개의 이용 가능한 설문자료가 수집되었다(15.6%의 응답 비율). PCS 척도의 타당성을 검증하기 위하여 Sontag과 Lee의 연구에서 사용한 요인분석과 신뢰도분석을 동일하게 3단계 절차로 노인층을 대상으로 실시하였다. AMOS 5.0 을 사용한 3단계 신뢰도 분석 결과 19-항목을 포함한 3-요인으로 구성된 PCS척도의 타당성이 노인층을 대상으로 검증되었다. 노인층의 PCS척도는 다음의 3-요인으로 구성된다: 1) 의복이 자아 구성 과정에 미치는 영향(PCS 요인 1-2-3의 병합), 2) 의복이 평가적이고 정서적인 자존 형성과정에 미치는 영향(PCS 요인 4-5의 병합), 그리고 3) 의복이 신체상과 신체에 쏟는 정신 집중정도에 미치는 영향(PCS 요인 6). Sontag과 Lee가 초기적으로 가설한 6-요인 PCS 척도는 청소년층과 노인층을 대상으로 한 어느 연구에서도 검증되지 않았다. 더 나아가, 이들이 검증한 청소년층의 4-요인 PCS 척도도 노인층을 대상으로 한 연구에서 검증되지 않았다. 이는 노인들의 자아 구성 이젊은 층보다 더 통괄/복합적인 것에서 기인된다고 보인다. 이 글은 PCS 척도의 앞으로의 연구방향과 이용방향을 끝으로 마무리 지어 진다.

산업체 부설연구소의 정보기능에 관한 연구 (A Study on the Information Gathering Function of Research and Development Laboratories Established within Industrial Firms)

  • 조인숙
    • 한국문헌정보학회지
    • /
    • 제16권
    • /
    • pp.281-327
    • /
    • 1989
  • This dissertation is presented in two major parts. The first part presented in Chapter 3 attempts to verify the major hypothesis of the present study that the research and development laboratories(hereafter referred to R&D laboratories), establishd withine industrial firms to develop new technologies needed for their own industrial activities, may have another but very important functions to bring information on the externally generated technologies to attention of their respective management decision makers, eventually resulting in the transfer of technology; and such information functions of the R&D laboratories may be better performed by well-organised laboratories than by poorly-organised ones. The second part presented in Chapters 4, 5, 6 and 7 discusses, after the preceding hypotheses has been verified, some desirable situations of the R&D laboratories in facilitating the flow of information on new technologies developed in the world into their industrial firms, centering on the organisational positions and the major fields of interest of the person in charge of the R&D centers, services of the library and technological information office supporting the R&D laboratories, and frequencies of direct contacts of research and development workers with experts in the world and of participation in various conferences, seminars, workshops, exhibitions, etc. Now that there is no recognised instrument and method available for direct measurement of volume of technological information transfered into a particular industrial firm, the number of technologies introduced into a given firm is employed in the present study as an analogous parametre indicating volume of technological information transfered into the firm during a particular period of time. A logical attempt to justify the use of the indirect paramentre is made in Chapter two. vidences needed to verify the hypotheses of the present study are collected through the various publications of the Korea Industrial Research Institutes and other agencies and institutions related to industrial research activities, and through responses to the questionnaire posted to a sample of the 66 R&D laboratories on 6 May 1987 and returned by 30 August of the same year. Some findings and conclusions made in the study are summarised as follows: (1) More information on externally developed technologies flows into the industrial firm with a R&D laboratory of its own than into the industrial firm without one, and naturally, more chances of transfer of technologies are given to the former than to the latter (see 3. 2) (2) After establishing an R&D laboratory, more technological information flows into the industrial firm than before establishing one (see 3. 3) (3) More technological information flows into the industrial firm with a well-organised R&D laboraory than into the firm with a poorly-organised one (see 3. 4) (4) More technological information flows into the ndustrial firm where the director of its R&D laboratory has status qualified to participate in the highest managerial decision making processes of the firm than into the industrial firm where the director does not have such status (see 4. 2) (5) More technological information flows into the industrial firm where the director of R&D laboratory does not hold other positions within the firm than into the industrial firm where the director holds other positions (see 4.3) (6) There is evidence showing that quantities of technological information transfered into industriali firms vary with the case that the major background of the director of the R&D laboratory is the same as the main field of R&D activities of his or her laboratery, the case that the director's background is partly related to the field of R&D activities of the laboratory, and the case that the director's major background is different from the field of R&D activities of the laboratory (see 4.4) (7) More technological information flows into the industrial firm with the director of its R&D laboratory appointed from among professional research and development workers than into the industrial firm with the director of its R&D laboratory appointed from among general managers (see 4.5) (8) More technological information flows into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which uses a library within the firm but outside the laboratory (see 5. 1) (9) More echnological information flows into the industrial firm with a technological information office of its own than into the industrial firm without such an office (see 5. 2) (10) More technological information flows into the industrial firm with a large research and development staff in its R&D laboratory than into the industrial firm with a small staff in its R&D laboratory (see 5. 2) (11) More technological information flows into the industrial firm with its R&D laboratory whose staff members more frequently contact experts in the conferences, seminars, symposiums, and workshops held in foreign countries and novelties in the world's major exhibitions than into the industrial firm with its R&D laboratory whose staff members less frequently contact such experts and novelties (see 6. 2 ; 6. 3)

  • PDF

지체장애인의 생활체육 참여정도가 긍정심리자본(PPC)에 미치는 영향 (The Effect of Participation Degree in Sports for all of People with Physical Disabilities on Positive Psychological Capital(PPC))

  • 김대경;박진우;김혜민;이현수
    • 한국체육학회지인문사회과학편
    • /
    • 제54권5호
    • /
    • pp.867-876
    • /
    • 2015
  • 본 연구의 목적은 지체장애인의 생활체육 참여정도가 긍정심리자본(PPC)에 미치는 영향을 규명하고자 하였다. 연구의 목적을 달성하기 위하여 B시에 거주하고 있으며 생활체육에 참여하고 있는 지체장애인 212명의 자료를 분석하였다. 측정도구는 전상완 및 양종훈(2009)의 생활체육 참여정도와 Luthans, Youssef, & Avolio(2007)가 개발한 척도를 임태홍(2014)이 재구성한 긍정심리자본(K-PPC)을 수정·보완하여 재구성하였다. 자료처리는 SPSS 18.0 프로그램을 사용하여 탐색적 요인분석, 신뢰도 검증, 차이검증과중다회귀분석을 실시하였다. 첫째, 지체장애인의 인구사회학적 특성 중 성별, 연령, 장애등급에 따른 긍정심리 자본에는 유의한 차이가 있는 것으로 나타났다. 둘째, 지체장애인의 생활체육 참여정도(기간, 빈도, 강도) 하위 변인 중 참여빈도, 참여강도는 자기효능감에 유의한 영향을 미치는 것으로 나타났으며, 반면 참여기간은 유의한 영향을 미치지 않는 것으로 나타났다. 셋째, 참여빈도는 낙관주의에 유의한 영향을 미치는 것으로 나타났으며, 반면 참여기간, 참여강도는 유의한 영향을 미치지 않는 것으로 나타났다. 넷째, 참여빈도, 참여강도는 희망에 유의한 영향을 미치는 것으로 나타났으며, 반면 참여기간에는 유의한 영향을 미치지 않는 것으로 나타났다. 다섯째, 참여빈도는 회복탄력성에 유의한 영향을 미치는 것으로 나타났으며, 반면 참여 기간, 참여강도에 유의한 영향을 미치지 않는 것으로 나타났다. 여섯째, 참여빈도, 참여강도는 긍정심리자본에 유의한 영향을 미치는 것으로 나타났으며, 참여기간에는 유의한 영향을 미치지 않는 것으로 나타났다.

중⋅고등학생용 가정교과 세 행동체계 척도 개발 및 타당화 연구 (A Study on the Development and Validation of Three Systems of Action Scale in Home Economics for Middle and High School Students)

  • 최성연
    • 한국가정과교육학회지
    • /
    • 제35권3호
    • /
    • pp.67-96
    • /
    • 2023
  • 본 연구는 가정교과에서 중·고등학생을 위한 세 행동체계의 실태를 파악할 수 있는 척도를 개발하고 타당화하는 것을 목적으로 하였다. 이를 위해서 세 행동체계와 관련된 국내외 문헌을 고찰하여 예비문항으로 기술적 행동, 의사소통적 행동, 해방적 행동을 측정할 수 있도록 각 행동체계별로 35개 문항, 총 105개 문항을 5점 리커트 척도로 개발하였다. 개발된 예비문항을 가정교육학 전문가에게 내용타당도를 검토받아 수정·보완하는 절차를 두 차례 실행하였다. 개발된 예비문항 70개를 중·고등학생을 대상으로 예비조사를 실시하여 166부를 회수하였다. 척도의 타당성을 검정하기 위해 회수된 설문지를 탐색적 요인 분석한 결과 7요인 38개 문항이 적합한 것으로 나타났다. 탐색적 요인분석 결과를 바탕으로 본 조사 문항을 구성한 후 중·고등학생을 대상으로 본조사를 실시하여 548부를 회수하여 확인적 요인분석을 하였다. 확인적 요인분석을 통해 기초생활능력 5문항, 자기관리능력 4문항, 정보처리능력 4문항, 의사소통·대인관계능력 12문항, 비판적사고력 3문항, 의사결정능력 7문항, 임파워먼트 3문항 총 38문항이 최종 선정되었다. 이 모형의 적합도는 χ2=1846.741(p<.001), CFI=0.865, TLI=0.853, RMSEA=0.058로 나타났고, 각 문항별 표준화 계수는 0.5 이상으로 나타났으므로 가정교과에서 중·고등학생의 세 행동체계의 실태를 측정하는데 적합한 측정 도구로 볼 수 있다. 세 행동체계 척도는 자아정체감 척도의 하위요인인 자기수용성, 미래계획성, 친밀성, 독특성과 사회참여척도와 유의한 상관을 갖는 것으로 나타나 공인타당도를 갖는 것으로 확인되었다.

탄산칼슘을 이용한 이산화탄소 안정동위원소 표준시료 제작에 대한 연구 (Preparation of Pure CO2 Standard Gas from Calcium Carbonate for Stable Isotope Analysis)

  • 박미경;박선영;강동진;리선란;김재연;조춘옥;김주일;김경렬
    • 한국해양학회지:바다
    • /
    • 제18권1호
    • /
    • pp.40-46
    • /
    • 2013
  • 안정동위원소 질량분석기를 이용한 탄소와 산소의 동위원소비 측정은, 이산화탄소 표준기체의 동위원소 비에 대하여 그 상대적인 값을 측정함으로써 이루어진다. 따라서 실험실 표준기체는 ${\delta}^{13}C$${\delta}^{18}O$ 값의 국제 표준물질인 PDB와 V-SMOW에 대해 보정된 이산화탄소이여야 하며, 이는 국제적 자료의 비교와 검증을 위해 필수적이다. 그러나 표준기체는 제작 기간이 길며, 가격이 비싼 단점이 있고, 장기간 사용 시 실린더 내부 압력의 변화로 동위원소의 분별이 생길 우려가 크다. 따라서 본 연구는 실험실 표준기체 관리의 효율성을 높이기 위해 장기간 안정적 보관이 가능한 고체 표준물질로부터 동위원소 분별없이 순수한 이산화탄소 기체를 추출하여, 실험실 표준기체로 사용할 수 있는 방법을 제시하고자 한다. 본 논문은 Coplen et al.(1983)에 의하여 제안된 방법을 기초로 한 다량의 이산화탄소 표준 기체 제작에 초점을 두었다. 이산화탄소는 탄산칼슘과 100% 순수 인산의 반응에 의해 생성되는데, 두 물질의 반응에 필요한 실험 장치 및 실험 과정을 상세히 기술하였으며, 최적의 실험 조건 결정을 위한 다양한 분석 결과를 소개하였다. 이어 생성된 이산화탄소 기체의 추출, 정제와 포집은 자체 제작된 진공관에서 이루어졌으며, 각 단계에 대한 자세한 설명이 주어진다. 이산화탄소의 ${\delta}^{13}C$${\delta}^{18}O$ 측정은 서울대학교 기초과학교육연구 공동기기원에서 운영 중인 안정동위원소 질량분석기(VG Isotech, SIRA Series II)를 이용하여 이루어졌다. 탄산칼슘 고체 표준물질로부터 이산화탄소 기체 추출과 추출된 기체의 정제 포집 등 전체 분석과정의 정밀도 검증을 위해 동일한 Solenhofen-ori $CaCO_3$(< $63{\mu}m$) 고체 시료로 부터 15회에 걸쳐 표준기체를 제작하였고, 매회 100 mg $CaCO_3$을 이용하여 총 15개의 표준기체 제작이 8일에 걸쳐 이루어졌다. 이 표준기체들의 분석 표준편차($1{\sigma}$)는 ${\delta}^{13}C$의 경우 ${\pm}0.01$‰, ${\delta}^{18}O$${\pm}0.05$‰로 매우 높은 정밀도를 보여주었다. 이러한 분석 정밀도는 안정동위원소 질량분석기기 자체와 같은 내부 정밀도에 상응하며, 본 연구에서 제시한 실험실 표준기체 제작방법의 높은 신뢰성과 재현성을 입증하는 결과이다. 따라서 본 연구는 표준기체 보유가 어려워 정밀, 정확한 안정동위원소 분석에 어려움이 많았던 연구 분야에 자체 표준기체 제작 기술을 제공하는데 크게 기여할 것으로 생각된다.

Perceptional Change of a New Product, DMB Phone

  • Kim, Ju-Young;Ko, Deok-Im
    • 마케팅과학연구
    • /
    • 제18권3호
    • /
    • pp.59-88
    • /
    • 2008
  • Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

  • PDF