• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.650-655
• /
• 2001

Wind speeds can vary rapidly and wind turbines cannot easily follow these variations because of their inertia and aerodynamic characteristics. For maximum energy extraction. the turbine blades should operate at their optimum tip speed ratio, but with rapid changes in wind speed. this is usually not possible. To improve the energy extraction from turbulent wind, it is necessary to establish an effective measure of the high frequency component of the wind. and then to use this measure to optimise the operation of the turbine controller for maximum energy extraction. This paper presents an approach for combining readings from three anemometers into a composite wind speed measurement. and using this signal to control the operation of a permanent magnet generator to achieve maximum energy extraction. The method combines simulation and experimental investigations into a heuristic algorithm. and demonstrates its effectiveness with field trials.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.513-520
• /
• 1998

The evaluation of uncertainty in environmental elemental analysis can be difficult because of the wide variety of analytical sample and objectives. for the specification of measured, elemetal analysis need certain method and high pretreatment technique. The sample of Pb, Cd in paddy soil and sewage sludge were analyzed by same ICP-AES, but each using four different pretreatment technique ; 0.1N HCl extraction, AB-DTPA extraction and two Mixture Acid Digestion. The four technique gave comparable results for the analysis of lead and cadmium. Concentrations determined by Mixture Acid Digestion were more higher than those by 0.1NHCI extraction and AB-DTPA extraction.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.859-861
• /
• 2003

In order to present a space in details, it is indispensable to acquire 3D shape and texture simultaneously from the same platform. 3D shape is acquired by Laser Scanner as point cloud data, and texture is acquired by CCD sensor. Positioning data is acquired by IMU (Inertial Measurement Unit). All the sensors and equipments are assembled on a hand-trolley. In this research, a method of integrating the 3D shape and texture for automated construction of Digital Surface Model is developed. This Digital Surface Model is applied for efficient feature extraction. More detailed extraction is possible , because 3D Digital Surface Model has both 3D shape and texture information.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.1
• /
• pp.47-54
• /
• 2016

Background : A new extraction method-heated ultrasonic extraction was qualitatively and quantitatively analyzed for the extraction of major ginsenosides from ginseng extract; this new high-performance liquid chromatography (HPLC) method was compared with the official extraction method of Korean industrial standards and standard for health functional food. Methods and Results : Ginsenoside compounds were analyzed for 35 minutes by the new HPLC analysis method using a Halo$^{(R)}$ RP-Amide column. The new HPLC analysis method was validated by the measurement of intra-day and inter-day precision, accuracy, limit of detection (LOD), and limit of quantification (LOQ) of each ginsenoside. The correlation coefficients (r2) for the calibration curves of the ginsenoside compounds were over 0.9997 in terms of linearity. The heated ultrasonic extraction method using ultrasonication for 30 minutes at $50^{\circ}C$ yielded higher amount of ginsenosides than the extraction method of the Korean industrial standards owing to the enhancement of extraction efficiency. Conclusions : Compared to the other extraction methods, the heated ultrasonic extraction method yielded a higher amount of ginsenoside Rb1 than Rg1 index compounds for the quality evaluation of ginseng roots.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.163-167
• /
• 2003

As digital photogrammetry can acquire much three-dimensional data quickly and exactly in equal accuracy, and it has advantage that can use this in modelling, it's practical use possibility is increased in various field by collection method of data for GIS. In this study, it was intended to create 3D image that has coordinate system, and use in acquisition of position information for object. And, it was applied to discontinuities extraction and measurement of rock slope for practical use of three-dimensional image and examination of measurement accuracy. Through this, it is inspected the possibility of three-dimensional image creation and the acquisition of space information.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.809-812
• /
• 2005

In this work, a new method for extracting substrate parameters of RF MOSFETs based on 3-port measurement is presented using device simulation. A T-type substrate resistance network is used. 3-port Y-parameter analyses were performed on the equivalent circuit of RF MOSFETs. All the components in the RF MOSFETs when the device is turned off were extracted directly from the 3-port device simulation data. The small-signal output admittance $Y_{22}$ can be well modeled up to 40 GHz. From the 3-port simulation and modeling results, it was verified that the proposed equivalent circuit and parameter extraction method was more accurate than the single substrate resistance model.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.57-61
• /
• 2006

A study has been made on the quantification and evaluation of fabric pilling using two-dimensional and three-dimensional hybrid imaging methods. Two-dimensional imaging method was good for some samples while three-dimensional measurement method for others, according to the properties of their base fabric. Various image processing techniques as well as three-dimensional data processing algorithms were applied for the extraction of pills from measured data and a series of shape parameters have been defined for the objective evaluation of fabric pilling. An evaluation criterion that is compatible with the conventional evaluation method has been proposed by applying the new evaluation method to the current photographic standards.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.34-45
• /
• 2015

The illegal copy of Windows software is one of the problems, because Windows is the most popular operating system in the country. The illegal copy can be infringe a software copyright, and software birthmark is one of solutions which is protecting software copyright. Software birthmark is a technique to distinguish software piracy using feature information from software. The type of software birthmark can be differentiated between static birthmark and dynamic birthmark through an extraction method. Static birthmark and dynamic birthmark have strengths and weaknesses. In this paper, we propose similarity measurement technique using dynamic birthmark based on API, and we explain extraction process of dynamic birthmark. In addition, we have verified that the proposed similarity measurement technique meet resilience and credibility through experiment. Furthermore, we saw that proposed measurement technique better than existing measurement technique.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.546-555
• /
• 2009

There is increasingly interested in the measurement of antenna's characteristics for one's manufacture according to one's various application. Due to this, the antenna measurement system need be made with more and more great precision. On measuring of the antenna's characteristic, the conventional system handled by human generates the error due to controlling the position of the system by user. Therefore there need be introduced the automatic measurement system of antenna's characteristic. In this paper, we propose antenna extraction algorithm for the Antenna automatic measurement system of antenna's characteristic. The proposed algorithm gets the antenna image from antenna measurement system, extracts an antenna object from the image, and extracts the parameters for antenna's slant and antenna's location. The extracted parameters is used to correct location and distortions of the antenna and automatic measurement. The proposed algorithm is applied to the patch antenna. The results show that antenna's object is efficiently extracted and the angle for correcting the error is calculated well.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1855-1860
• /
• 2009

This paper caused a distribution utility to generation of analysis fault several cases on the ground of substation in a energy meter three phase current, voltage data measurement to fault type and characteristics. Mother wavelet transformation of suitable to method algorithm from the distribution utility to generation of fault in image impedance etc several parameter for utility characteristics effective to probatory fault point extraction.