• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.409-418
• /
• 2018

In this study, experiments were carried out after fabricating and installing a physical model considering the size of the prototype. In the model test, the number of struts placed on the wall and the applied acceleration were selected as test variables. Two different types of waves, long-period and short-period, were applied with magnitudes of 0.05g, 0.1g, 0.2g, and 0.3g. Measured are displacements at specified points. As a result of the analysis, displacement exceeding the allowable displacement of the wall occurred at an acceleration greater than 0.05g to 0.1g depending on the seismic waves applied. Therefore guidelines have to be established through further studies for aseismic design of earth retaining walls.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.293-300
• /
• 1999

A mathematical model for the analysis of roll gap phenomena in strip temper rolling process is described. The mechanical peculiarities of temper rolling process, such as high friction value and non-circular contact arc, low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation (preliminary displacement or sticking) zone etc., are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The restricted deformation zone near the neutral point is also considered. The concept and the calculation method of limiting preliminary displacement are used to determine the length of the central restricted deformation zone. The comparison of the model results with the measured mill data is also made.

• 콘크리트학회논문집
• /
• 제18권3호
• /
• pp.347-354
• /
• 2006

본 논문에서는 웨이블릿 변환이론을 동적 응답변환 알고리즘에 적용하였다. 응답변환 알고리즘에서는 변환응답의 정의에 따라 변위자료를 평가할 수 있는 기법이 제시되었으며, 측정된 가속도신호의 적분에 의한 속도와 변위응답의 추정에서 속도와 변위성분의 초기조건에 대한 정보가 불필요하도록 유도되었다. 웨이블릿 변환은 순수한 스펙트럼 해석뿐만 아니라 시간영역에서의 분해신호를 추출하는데 있어 시간-주파수 공간에서의 실제 신호형상을 제공하는 장점을 갖고 있다. 웨이블릿 분해신호를 사용한 응답변환에서는 추정된 변위곡선에서 정적성분을 추출하거나 동적 변위성분의 모우드별 분리를 가능하게 한다. 제시된 응답변환 알고리즘의 타당성을 평가하기 위해 이동하중이 재하된 실 교량의 현장시험자료를 적용하였다. 교량의 동적 재하시험에서 추정응답의 신뢰도가 확보될 경우에 제시된 방법에 의한 보다 정확한 충격계수의 평가가 가능할 것으로 사료되며, 직접적인 변위의 측정이 곤란한 대형구조물에 대한 동특성의 평가에서도 유용하게 적용될 수 있을 것으로 판단된다.

• 한국터널지하공간학회 논문집
• /
• 제18권5호
• /
• pp.487-497
• /
• 2016

터널을 굴착하면 굴진면 주변지반은 응력이 해방되고, 해방된 응력이 주변지반으로 재분배 되어 터널주변지반의 응력상태와 터널지보공에 작용하는 하중이 변한다. 굴진면에 변위가 발생하면 굴진면 전방지반이 이완되고 굴진면에 작용하는 토압은 감소하며, 변위가 일정한 크기 이상 커지면 굴진면 전방지반이 파괴상태에 이른다. 이때에 터널의 종방향으로 하중전이가 발생하며, 토피고나 굴진면의 변위정도에 따라 그 경향이 다르다. 굴진면 파괴에 따른 터널 종방향 하중전이에 대해서는 연구된 사례가 있으나, 굴진면 변위와 종방향 하중전이를 결부시켜서 연구한 사례는 거의 없는 실정이다. 따라서 본 연구에서는 토사터널에서 모형실험을 수행하여 굴진면이 과다변위로 인해 파괴됨에 따른 종방향 하중전이의 특성을 파악하였다. 즉, 정지토압 상태에서 시작하여 굴진면의 변위가 진행됨에 따른 터널 종방향 하중전이를 모형실험을 수행하여 측정하였다. 연구 결과, 종방향 하중전이는 굴진면 변위 초기에 대부분이 발생하고 굴진면 변위가 한계변위에 근접할수록 완만한 기울기로 한계치에 수렴하였다. 즉, 종방향 하중전이는 굴진면 전방지반이 아직 탄성상태일 때 급격히 증가하였고, 지반이 한계상태에 근접하면 완만하게 증가하는 경향을 나타내었다. 굴진면에서 변위에 의한 토압감소와 터널 종방향 하중전이는 같은 추세로 발생하는 것을 알 수 있었다.

• 한국전산구조공학회논문집
• /
• 제36권1호
• /
• pp.1-7
• /
• 2023

본 논문에서는 구조물의 부분 변위값으로 전체 구조물의 변위 형상을 예측할 수 있는 인공지능 학습기법을 개발하였으며, 개발된 기술의 성능을 실험을 통해 평가하였다. 3차원 공간에서 변위 형상 및 노드 위치 좌표의 특성을 학습에 반영할 수 있는 Image-to-Image 변위 형상 학습과 위치 특징을 결합한 변위 상관 학습 방법을 제시하였다. 개발된 인공지능 학습방법의 성능을 평가하기 위해 목업 구조 실험을 진행하였고, 3D 스캔으로 측정한 변위값과 인공지능으로 예측한 결과를 비교하였다. 비교 결과 인공지능 예측 결과는 3D 스캔 측정 결과에 비해 5.6~5.9%의 오차율을 보여 적정 성능을 보였다.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.479-486
• /
• 2002

In this study, the progressive inelastic deformation, so called, thermal ratchet phenomenon which can occur in high temperature structures of liquid metal reactor was simulated with thermal ratchet structural test facility and 316L stainless steel test cylinder. The thermal ratchet deformation at the reactor baffle cylinder of the liquid metal reactor can occur due to the moving temperature distribution along the axial direction as the sodium free surface moves up and down under the cyclic heat-up and cool-down transients. The ratchet deformation was measured with the laser displacement sensor and LVDTs after cooling the structural specimen which is heated up to 55$0^{\circ}C$ with steep temperature gradients along the axial direction. The temperature distribution of the test cylinder along the axial direction was measured with 28 channels of thermocouples and was used for the ratchet analysis. The thermal ratchet deformation was analyzed with the constitutive equation of nonlinear combined hardening model which was implemented as ABAQUS user subroutine and the analysis results were compared with those of the test. Thermal ratchet load was applied 9 times and the residual displacement after 9 cycles of thermal load was measured to be 1.79mm. The ratcheting deformation shapes obtained by the analysis with the combined hardening model were in reasonable agreement with those of the structural tests.

• 한국철도학회논문집
• /
• 제12권4호
• /
• pp.506-511
• /
• 2009

본 연구에서는 대차에서 계측한 가속도 데이터를 사용하여 궤도틀림을 식별하기 위한 알고리즘을 제안하였다. 등가 SISO 모델에 의한 정상궤도틀림 상태에서의 대차진동과 궤도틀림과의 주파수영역 전달함수를 정의하고, 이를 역으로 이용하여 대차에서 계측한 가속도 데이터로 궤도틀림을 예측하였다. 예측된 값과 기준값과의 잔차의 분산 비로정의되는 틀림지수를 사용하여 궤도틀림의 이상을 분석하였다. 궤도틀림을 시간에 따라 변하는 변위 경계조건으로 고려하여 3차원 수치예제를 수행하였으며, 제안된 알고리즘의 타당성을 검증하였다.

• PNF and Movement
• /
• 제16권1호
• /
• pp.67-73
• /
• 2018

Purpose: Smartphones, which are widely used worldwide to detect acceleration and position, have been used in the area of rehabilitation medicine in recent clinical research studies and tests. The aim of the present study was to determine the feasibility of using a smartphone application based on center of movement (COM) displacement to measure gait parameters in stroke patients in the clinical field of rehabilitation medicine. Methods: The study consisted of 30 stroke patients. The COM was measured using a smartphone application, Gait Analysis Pro, during a 6-m walk. Each patient performed three 6-m walking trials, and the smartphone application measured gait duration, gait speed, step length, cadence, and vertical and lateral displacement of the COM. The Kolmogorov-Smirnov test was conducted to determine the normality in gait parameters, and a repeated one-way analysis of variance (ANOVA) was performed to determine the consistency among the three trials. A p value of 0.05 was considered statistically significant in all the tests. Results: In all the measured parameters, the smartphone application showed a normal distribution, as shown by the results of the Kolmogorov-Smirnov test. There were no significant differences among the three repetitive walking trials. Conclusion: These results suggest that the smartphone application can be used for evaluating gait in stroke patients, as well as in healthy adults. However, prior to using the smartphone application in the clinical field, further research involving three-dimensional gait analysis is needed to enhance the confidence level of the findings.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1404-1414
• /
• 2008

In the mechanistic-empirical trackbed design of railways, the resilient modulus is the key input parameter. This study focused on the resilient modulus prediction model, which is the functions of mean effective principal stress and axial strain, for three types of railroad trackbed materials such as crushed stone, weathered soil, and crushed-rock soil mixture. The model is composed with the maximum Young's modulus and nonlinear values for higher strain in parallel with dynamic shear modulus. The maximum values is modeled by model parameters, $A_E$ and the power of mean effective principal stress, $n_E$. The nonlinear portion is represented by modified hyperbolic model, with the model parameters of reference strain, ${\varepsilon}_r$ and curvature coefficient, a. To assess the performance of the prediction models proposed herein, the elastic response of a test trackbed near PyeongTaek, Korea was evaluated using a 3-D nonlinear elastic computer program (GEOTRACK) and compared with measured elastic vertical displacement during the passages of freight and passenger trains. The material types of sub-ballasts are crushed stone and weathered granite soil, respectively. The calculated vertical displacements within the sub-ballasts are within the order of 0.6mm, and agree well with measured values with the reasonable margin. The prediction models are thus concluded to work properly in the preliminary investigation.

• Smart Structures and Systems
• /
• 제25권1호
• /
• pp.81-96
• /
• 2020

Wind measurements were made on the Canton Tower at a height of 461 m above ground during the Typhoon Vincente, the wind-induced accelerations and displacements of the tower were recorded as well. Comparisons of measured wind parameters at upper level of atmospheric boundary layer with those adopted in wind tunnel testing were presented. The measured turbulence intensity can be smaller than the design value, indicating that the wind tunnel testing may underestimate the crosswind structural responses for certain lock-in velocity range of vortex shedding. Analyses of peak factors and power spectral density for acceleration response shows that the crosswind responses are a combination of gust-induced buffeting and vortex-induced vibrations in the certain range of wind directions. The identified modal frequencies and mode shapes from acceleration data are found to be in good agreement with existing experimental results and the prediction from the finite element model. The damping ratios increase with amplitude of vibration or equivalently wind velocity which may be attributed to aerodynamic damping. In addition, the natural frequencies determined from the measured displacement are very close to those determined from the acceleration data for the first two modes. Finally, the relation between displacement responses and wind speed/direction was investigated.