• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.15-16
• /
• 2006

In-process surface roughness prediction is studied in this research. To implement in-process prediction, spindle displacement is introduced. Machined surface's roughness is assumed to be expressed in terms of spindle displacement. In-process measurement of spindle displacement is conducted using CCDS (cylindrical capacitive displacement sensor). Two prediction models are developed. One is simple linear model between measured surface roughness and values by spindle displacement. The other is multiple regression model including machining parameters like spindle speed, fee rate and radial depth of cut. Relation between machined surface roughness and roughness by spindle displacement are verified.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• 한국재난정보학회 논문집
• /
• 제13권3호
• /
• pp.286-295
• /
• 2017

본 연구는 경사계에 의한 지중수평변위 계측값을 중심으로 수치해석에 적용하기 위한 지반 반력계수를 다양한 이론 및 경험식으로 산출하여 비교하였다. 산정된 지반반력계수의 변화에 따라 벽체 최상단에서는 벽체변위의 최소값과 최대값의 차이가 6.80배로 크게 났으나, 최대 변위점에서는 차이는 거의 없는 1.06배로 나타나 지반반력계수의 증분에 비해 변위의 차이는 작으며 전체적으로 비슷한 값을 나타내었다. 또한 최대변위 발생점에서의 변위를 수치해석한 결과와 계측치로 비교한 결과 변위형상은 비슷하게 나타났다.

• 터널과지하공간
• /
• 제22권3호
• /
• pp.214-220
• /
• 2012

터널 굴착에 의해 발생되는 주변 지반의 변위는 터널의 안정성 평가를 위해 중요한 정보가 된다. 실제 시공중 계측에 의해 획득되어 지는 변위량은 불가피하게 계측전 발생한 변위를 포함하지 못하게 된다. 따라서, 계측이 이루어진 시점을 고려하여 계측전 발생한 변위량을 예측하는 것은 매우 중요하다. 본 연구에서는 초기 계측이 이루어진 시점에 따라 계측전 변위 예측의 정확도를 굴착면과 계측지점의 이격거리만을 고려하여 통계적 기법으로 고찰하였다. 또한, 계측 오차가 변위 예측결과에 미치는 영향을 몬테카를로 시뮬레이션을 통하여 살펴보았다. 연구결과 초기 계측이 이루어진 이격거리가 커질수록 전체 변위 이력곡선의 예측 정확도는 급격히 감소하였으며, 계측오차가 커질수록 예측 정확도가 낮아지는 경향을 확인하였다.

• 대한치과교정학회지
• /
• 제50권2호
• /
• pp.129-135
• /
• 2020

Objective: This study aimed to evaluate the immediate effects of mandibular posterior displacement on the pharyngeal airway space (PAS) by using cephalometric evaluations and to investigate how the surrounding structures are schematically involved. Methods: In this retrospective study, 38 subjects with functional Class III malocclusion and two lateral cephalograms were selected. The first lateral cephalogram was taken with the mandible in the habitual occlusal position, and the second in anterior edge-to-edge bite. Paired t-test was used to analyze changes in the PAS, hyoid bone, tongue, and soft palate, followed by mandibular posterior displacement. Pearson's correlation analysis was used to determine the relationship between the amount of mandibular posterior displacement and other variables. Results: A statistically significant decrease was observed in the PAS following mandibular posterior displacement. Along with mandibular posterior displacement, the tongue decreased in length (p < 0.001) and increased in height (p < 0.05), while the soft palate increased in length, decreased in thickness, and was posteriorly displaced (p < 0.001). The hyoid bone was also posteriorly displaced (p < 0.05). There was no correlation between the amount of mandibular posterior displacement and the measured variables. Conclusions: The PAS showed a statistically significant decrease following mandibular posterior displacement, which was a consequence of retraction of the surrounding structures. However, there were individual variances between the amount of mandibular posterior displacement and the measured variables.

• 지질공학
• /
• 제33권4호
• /
• pp.689-699
• /
• 2023

Assessing ground stability is critical to the construction of underground transportation infrastructure. Surface displacement is a key indicator of ground stability, and can be measured using interferometric synthetic aperture radar (InSAR). This study measured time-series surface displacement using permanent scatterer InSAR applied to Sentinel-1 SAR images acquired from January 2017 to June 2023 for the area around a deep underground expressway under construction to connect Mandeok-dong and Centum City in Busan, South Korea. Regions of seasonal subsidence and uplift were identified, as were regions with severe subsidence after summer 2022. To evaluate stability of the ground in the construction area, the mean displacement velocity, final surface displacement, cumulative surface displacement, and difference between minimum and maximum surface displacement were analyzed. Considering the time-series surface displacement characteristics of the study area, the difference between minimum and maximum surface displacement since June 2022 was found to be the most suitable parameter for evaluating ground stability. The results identified highly unstable ground in the construction area as being to the north of the mid-lower reaches of the Oncheon-cheon River and to the west of the Suyeong River at the point where both rivers meet, with the difference between minimum and maximum surface displacement of 40~60 mm.

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.789-796
• /
• 2013

Vibration measurements using image processing have been studied by many researchers as it can remotely measure vibration displacements at multiple points simultaneously. It is difficult, however, to obtain accurate displacement from the measured image signals because the resolution of image data is dependent on camera performance and normally lower than that of vibration transducer directly measured. This paper suggests the enhanced technique for vibration displacement measurement by applying the expected value of edge probability distribution to the varying pixel points in the image. The method can both increase the resolution limit of camera image and decrease the measurement errors. The working performance of the proposed technique is verified applying to the vibration measurement of a rotating machine.

• 한국농공학회논문집
• /
• 제51권5호
• /
• pp.59-68
• /
• 2009

In this study, it was developed that the software could be used to estimate consolidation settlement by curve fitting method according to Terzaghi's consolidation theory on the condition of gradual incremental loading, and the method of estimating settlement caused by lateral displacement was suggested, in which the settlement was calculated from the difference between the settlement calculated with the developed software using the early part of measured data and the settlement measured for the short duration from the beginning of embankment in the field. The verification of the suggested method of estimating settlement caused by lateral displacement showed good results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.355-360
• /
• 1996

When the operational strains of a structure can not be directly measured in order to predict the life of the structure due to the problem of the attachment, those must be obtained indirectly. Since the displacement and the strain are interrelated, the strain can be predicted from the measured displacement and displacement-strain transformation matrix. The transformation matrix is dependent on the boundary condition, unfortunately, and it is also difficult to know exactly that of the operational system. In this study, for the structure with arbitrary boundary condition under the operation, the approximate method is proposed in order to predict the operational strains using the transformation matrix obtained by using free boundary conditions. And the method is applied to predict the strains of leads of surface mount component under the vibration of the printed circuit board.

• 터널과지하공간
• /
• 제6권4호
• /
• pp.287-297
• /
• 1996

Input data play an important role in numerical analyses. However, it is difficult to obtain appropriate data for many reasons. In order to overcome those difficulties, an automatic MPBX(Multi-Position Borehole Extensometer) monitoring system is developed. This system can be applied to the analyses of measured data which include evaluation of the stabiliyt, efficiency of construction and the validity of numerical analyses. At first, the MPBX among field measurement tools is considered in this study. Also, 3-dimension finite element analyses are carried out to verify the influence of geological conditions and excavation sequence on the MPBX displacement. The effect of geological conditons on the displacement can be estimated qualitatively qualitavely from the measured data by plotting displacement vs. depth.