• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권8호
• /
• pp.2030-2052
• /
• 2023

Analysis of a bipartite (two-mode) network is a significant research area to understand the formation of social communities, economic systems, drug side effect topology, etc. in complex information systems. Most of the previous works talk about a projection-based model or latent feature model, which predicts the link based on singular similarity. The projection-based models suffer from the loss of structural information in the projected network and the latent feature is hardly present. This work proposes a novel method for link prediction in the bipartite network based on an ensemble of composite similarities, overcoming the issues of model-based and latent feature models. The proposed method analyzes the structure, neighborhood nodes as well as latent attributes between the nodes to predict the link in the network. To illustrate the proposed method, experiments are performed with five real-world data sets and compared with various state-of-art link prediction methods and it is inferred that this method outperforms with ~3% to ~9% higher using area under the precision-recall curve (AUC-PR) measure. This work holds great significance in the study of biological networks, e-commerce networks, complex web-based systems, networks of drug binding, enzyme protein, and other related networks in understanding the formation of such complex networks. Further, this study helps in link prediction and its usability for different purposes ranging from building intelligent systems to providing services in big data and web-based systems.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.649-654
• /
• 2003

The simplest method for measuring output currents of the three phase inverters is to measure them with three current sensors such as hall sensors. This method requires at least two current sensors, and these types of sensors are somewhat expensive. More economical method is measuring DC link current with a simple shunt resistor, then, reconstructing output current using the DC link current value and the switching status. However, in low speed region, the measurement becomes difficult and even impossible due to the requirement of minimum switching duration for A/D conversion. These problems can be overcome by limitation of switching duration. Limitation of switching, however, causes voltage and current distortion. Owing to compensation, distortion can be effectively suppressed. However these increase acoustic noise due to increment of current ripple. In this paper, a current measurement method is proposed, which can reduce minimum switching duration resulting in reduction of acoustic noise. The validity of proposed method is confirmed through experiment.

• 대한임베디드공학회논문지
• /
• 제15권5호
• /
• pp.251-259
• /
• 2020

Ad hoc On-demand Distance Vector (AODV) protocol and its variants employ two important timers, hello and hold timer to keep track of topology changes. Moreover, hold timer is computed by multiplying constant value to hello timer. But, this configuration leads to inaccurate settings of hold timer. To solve this problem, in this paper, we propose a new dynamic adjustment of hello and hold timer scheme by removing dependency between them. A new metric to measure mobility is applied into hello timer, while expected link lifetime does holder timer. Simulation results show a significant reduction in the number of messages, a fact suggesting that it is possible to maintain and in some cases improve the performance of AODV with a minimum amount of messages released into the network.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.399-402
• /
• 2002

In this paper, the novel method is proposed to measure the capacitance of the dc link capacitor Advantage of the method is not to separate capacitor from 3-phase AC/DC/AC converters. In the proposed method, a specific low frequency current is injected to oscillate the voltage of dc capacitor at no load condition. The capacitance of dc capacitor is calculated with the effective values of this ripple voltage and current. The validity of the proposed method is confirmed by PSIM simulation.

• 제어로봇시스템학회논문지
• /
• 제18권8호
• /
• pp.774-779
• /
• 2012

We design and implement a RTT (Round Trip Time) based TCP (Transmission Control Protocol) for USN (Ubiquitous Sensor Network). We adopt a basic update algorithm for window size from FAST TCP that uses the queuing delay at link as the congestion measure. The designed TCP estimates the queuing delay at link from the measured RTT in the network layer, and updates the window size based on the estimated queuing delay. The designed TCP allows to utilize the full capacity of USN links and avoids the waste of the given link capacity that is common without the flow control in the transport layer. The experiment results show that the window size of the sender converges within a small range of variations without any packet loss, and verify the stability and performance of the designed TCP.

• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.739-746
• /
• 2006

Transit GPS Probe를 이용하여 통행 시간을 산출함에 있어서 Bus Probe는 Taxi에 비해 상대적으로 조밀한 주기당 통행 시간 정보를 생성하였으나, 링크별 근소한 신뢰수준의 차이에도 불구하고 Bus Probe는 Taxi에 비해 평균적으로 낮은 신뢰 수준을 나타냈다. 따라서, 두 수집원의 운행특성을 고려한, 연속적이고 신뢰성 있는 링크통행시간 정보를 생성할 필요성이 있는 바, Bus Probe와 Taxi Probe의 통행시간 비율을 주기당 변수로 생성하여 실시간 (Real-Time) 데이터와 과거(Historical)자료로 보정하는 휴리스틱한 알고리즘을 개발하였다. 본 알고리즘에서 Real-Time 데이터는 4주기, Historical 데이터는 혼잡도별 평균값이 입력변수로 설정되었으며, 각 설정값은 통계적 기법을 기반으로 도출되었다. 알고리즘의 평가는 서울시내 주요 3개축 구간의 20개 링크를 대상으로 6시간의 실측자료와 동일주기 Transit GPS 데이터의 신뢰도를 사용하였다. 알고리즘 적용 결과 대상링크의 전체평균 신뢰도(71.45%)가 향상되었고, 수집원간 단순 합성한 기존 방법에 비해 모든 링크에서 우수한 것으로 나타났다.

• 제어로봇시스템학회논문지
• /
• 제13권6호
• /
• pp.603-608
• /
• 2007

In the conventional AOA(angle-of-arrival) positioning utilizing reverse-link wireless channel, each sensor should be equipped with an array antenna to measure the incident angle of signal transmitting from a tag. To perform the complicated signal processing for angle measurements, sensor size and its power consumption will be large. In some applications like mobile robot location, there exists no strict restriction in tag size or in power consumption. Rather, it is desirable that the sensor would be as small as possible. This paper presents a new AOA positioning method utilizing forward-link channel. Under the assumption that the mobile robot is operating on the flat surface, the measurement model for FLAOA(tiJrward-link AOA) is derived first. Two kinds of position estimation algorithms using FLAOA measurements are proposed; Gauss-Newton method and closed-fonn solution method. With the proposed methods, we can ohtain the attitude of robot as well as its position. Positioning performance of proposed methods is compared by computer simulation. Simulation results show that the closed-form solution method using FLAOA measurements is suitable for indoor robot positioning.

• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.271-278
• /
• 2009

A new modulation scheme called multicoded-pulse position modulation (MC-PPM) is proposed for an ultrawideband (UWB) impulse radio communication system. The multicoded signal is generated by using several orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multicoded signal is converted to pulse position which results in not only an improved data rate, but also a processing gain in reception, delivering the power-efficient benefit of PPM and guaranteeing the low pulse energy for UWB systems. We notice that the modulation of multi-level values of the multicoded signal to pulse position is more efficient in terms of achievable data rate than the modulation of transmitting data based on other PPM schemes within given bandwidth and pulse energy. Therefore, as a performance measure, we focus on the achievable data rate (link capacity) of the proposed scheme and analyze it theoretically. Through simulation, we compare the link capacity of the MC-PPM scheme and other PPM schemes, such as M -ary PPM and multiple PPM. With the fixed bandwidth and same pulse energy condition, the UWB system based on the proposed MC-PPM scheme shows good link capacity and an increased data rate as L increases, which is contrary to other PPM schemes.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.84-93
• /
• 2009

This paper focuses on message complexity performance analysis of mobile ad hoc network (MANET) address autoconfiguration protocols (AAPs) in reference to link errors generated by mobile wireless nodes. An enhancement was made using a proposed retransmission limit, S, to be computed for error recovery (based on the link error probability), to measure message complexity of AAPs in reference to the link error probability, $P_e$. The control procedures for the retransmission limit have been included for each of the AAPs. Retransmission limit control is critical for efficient energy consumption of MANET nodes operating on limited portable energy. O-notation has been applied to analyze the upper bound of the number of messages generated by a MANET group of nodes. The AAPs investigated in this paper are strong duplicate address detection (DAD), weak DAD with proactive routing protocol (WDP), weak DAD with on-demand routing protocol (WDO), and MANETConf. Each AAP reacts different to link errors, as each AAP has different operational procedures. The required number of broadcasting, unicasting, relaying, and received messages of the nodes participating in a single-node joining procedure is investigated to asymptotically calculate the message complexity of each AAP. Computer simulation was conducted and the results have been analyzed to verify the theoretical message complexity bounds derived. The message complexity of WDP was lowest, closely followed byWDO, based on the simulation results and analysis of the message complexity under nominal situations. The message complexity of MANETConf was higher than WDO, and strong DAD resulted to be most complex among the four AAPs.

• 전자공학회논문지CI
• /
• 제48권4호
• /
• pp.35-42
• /
• 2011

대규모 무선센서네트워크 시스템을 안정적으로 운영하기 위해서는 네트워크를 구성하는 각 링크의 링크 품질(link quality)을 기반으로 네트워크를 구성하는 것이 필요하다. 두 노드 사이의 링크 품질은 해당 링크를 포함하는 모든 경로의 품질에 영향을 준다. 따라서 데이터 전송을 위한 경로 수립 과정에서 링크의 품질을 정확히 파악하는 것이 매우 중요하다. 본 연구에서는 대규모 무선센서네트워크를 구성하고, 운영에 들어가기까지 필요한 시간 및 에너지 소비를 최소화하기 위하여 통신 칩에서 제공하는 LQI(Link Quality Indication)와 RSSI(Received Signal Strength Indication)를 동시에 활용하여 각 링크의 링크 품질을 평가할 수 있는 HLQM(Hybrid Link Quality Metric)을 제안한다. HLQM을 사용하여 링크 품질을 평가하면, 다수의 패킷 전송과정을 거친 후 얻어진 결과를 링크 품질 평가에 다시 이용하는 기존의 방법들이 가지는 네트워크를 구성하고 운영에 들어가기까지 많은 set-up time과 비용이 소요되는 문제점과 LQI 또는 RSSI를 각 각 사용하는 방법들이 가지는 문제점도 개선되어 보다 효율적으로 링크 품질을 평가할 수 있게 된다. 제안된 방법의 타당성과 효율성을 검정하기 위하여 실제 다수의 메시지 전송에서 얻어진 PDR과 비교하는 실험을 수행하였다. 실험의 결과에서 HLQM을 사용하면 다른 메트릭을 사용하여 얻어진 결과에 비해 정확도, 재현율 및 일치율이 상대적으로 우수하다는 것을 확인하였다.