• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.79-85
• /
• 2010

In video standards such as H.264/AVC, motion estimation (ME) / compensation (MC) is regarded as a vital component in a video coder as it consumes a large amount of computation resources. The full search technique, which is used in general video codecs, gives the highest visual quality but also has the problem of significant computational load. To solve this problem, many fast algorithm has benn proposed. Among them, NPDS show that can maintain its video quality very close to the full search technique while achieving computation reduction by using a halfway-stop technique in the calculation of block distortion measure. In this paper, we proposed algorithm by determining minimum distortion measure with predictive motion vector and using the new search order. As the result, we can check that the proposed algorithm reduces the computational load 95% in average compared to the full search, respectively with the PSNR lost about 0.04dB.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.161-166
• /
• 2011

In this paper, for analysing the major factors giving the effect to the quality of HD level video on the multicasting service, we tried this test experiment on the College school network similar to the real service network environment. We measure the video quality distortion on the multicasting HD level video according to generating and increasing the broadcasting traffic on the situation that apply the QoS technique to the test network and not apply the QoS technique and then find out the threshold value of network factors giving the effect to the video quality distortion on the multicasting HD level video service. This paper can be used for guaranteeing the constant video quality and reducing the video quality distortion on the multicasting HD level video service.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.399-402
• /
• 1996

The electrodynamic loudspeakers should have a wide dynamic range to reproduce various sound levels. When the input signal is small, the radiated sound from the loudspeaker is not so much distorted. However, for large input signal with low frequency component the radiated sound is significantly distorted due to the nonlinearities of the loudspeaker. The suspension, damping, and magnetic flux of loudspeaker are the main sources of the nonlinearity. Such electromechanical parameters related to harmonic distortion have been represented by a polynomial model for diaphragm displacement, while each of the polynomial coefficient is evaluated by using the principle of harmonic balance experimentally. Based on the polynomial model, we designed a compensator for nonlinear harmonic distortion of direct radiator loudspeaker. Than observer is used to estimate the displacement of the loudspeaker diaphragm, which is rather difficult to measure directly in the conventional setting. The usefulness of the designed compensator is demonstrated by numerical simulations. Simulation results show about 30db decrease at the second and third higher harmonic distortions. We carry out an experiment on speaker to verify designed controller and nonlinear observer.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.218-221
• /
• 2000

The electronystagmography(ENG) means to measure and record CRP(Corneal-Retinal Potential) whenever the eyeball is moved by using a skin electrode stuck to the hi-temporal and the difference of CRP. Both the horizontal and vertical movement are known according to the position of the stuck skin electrode. In this paper, the variable time-constances to record the eyeball signal of the conventional EOG(Electro-Oculograph) Amplifier is chosen. The shorter the time-constance is, the worse the distortion of a signal is. But the unbalanced impedance of the electrode stuck on the hi-temporal is reduced. Also, the longer the time-constance is, the less the distortion of it signal is. But it is sensitive to the change of base line according to the unbalanced impedance. In order to solve these problems, an DC-Amplifier, the distortion of the eyeball signal is globally used. By solving unbalanced impedance problem of EOG amplifier, the distortion ratio of EOG amplifier is improved.

• Journal of Biomedical Engineering Research
• /
• v.15 no.1
• /
• pp.57-62
• /
• 1994

The demand of image compression is increasing now for the integration of medical images into the hospital information system. Even though the quantitative distortion can be measured from the difference between original and reconstructed images, it doesn't include the nonlinear characteristics of human visual system. In this study, we have evaluated the nonlinear characteristics of human visual system and applied them to the compression of medical images. The distortion measures which reflect the characteristics of human visual system has been considered. This image compression procedure consists of coding scheme using JND (Just Noticeable Difference) curve, polynomial approximation and BTC (Block Truncation Coding). Results show that this method can be applied to CT images, scanned film images and other kinds of medical images with the compression ratio of 5-10:1 without any noticeable distortion.

• Journal of Sensor Science and Technology
• /
• v.19 no.5
• /
• pp.375-384
• /
• 2010

In this paper, we proposed a new shaft distortion correction system having an adaptive PID controller using displacement sensors, which is adaptively reflecting variations of shaft strength owing to irregular heat treatment during an annealing process and sensitivity to the seasonal temperature changes. Generally, the shafts are annealed by heat treatment in order to enlarge the strength of the shaft, which causes an distortion of a shaft such as irregular bending of the shaft. In order to correct such a distortion of the shaft, a mechanical pressure is properly impacted to the distorted shaft. However, the strength of every shaft is different from each other owing to irregular annealing and seasonal temperature changes. Especially, the strength of a thin shaft such as a car transmission shaft is much more sensitive than that of a thick shaft. Therefore, it is very important for considering the strength of each shaft during correction of the car transmission shaft distortion in order to generate proper mechanical pressure. The conventional PID controller for the shaft distortion correction system does not consider each different strength of each shaft, which causes low productivity. Therefore, we proposed a new PID controller considering variations of shaft strength caused by seasonal temperature changes as well as irregular heat treatment and different cooling time. Three displacement sensors are used to measure a degree of distortion of the shaft at three different location. The proposed PID controller generates adaptively different coefficients according to different strength of each shaft using appropriately obtained pressure times from long-term experiments. Consequently, the proposed shaft distortion correction system increases the productivity about 30 % more than the conventional correction system in the real factory.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.68-72
• /
• 1993

A method to measure the distortions of the loudspeaker at low frequencies without an anechoic chamber is proposed. This method utilizes the fact that the n-th harmonic distortion outside the enclosure is boosted by 40log n dB compared to that inside the enclosure. By compensating for the effect of standing waves occuring inside the enclosure, it is possible to predict the distortions for wide frequency ranges below the first break-up frequency of the diaphragm. The method is applicable to the intermodulation distortion as well.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.2
• /
• pp.59-70
• /
• 1996

Given the flow matrix, plant size (rectangle shape) and department sizes, the algorithm in this paper provides the plant layout with rectilinear distance measure. To construct automated facility design, eigenvector approach is employed. A branch and bound computer code developed by Tillinghast is modified to find the feasible fits of departments without shape distortion (see [1])in the plant rectangle. The computational results compared with CRAFT are shown.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.408-413
• /
• 1995

Nowadays, manufacturing system is trending toward integrated circumstance by helping of CAD/CAM/CAT. To use this system effectively, it is necessary to get exact 3 dimensional surface data of an object. We have been using contact method to measure 3 dimensional object profile. But his method has demerit of leaving scrach or small distortion on the object. To improve this, a non-contact measuring method using optical system is adopted. In this paper, We propose optical ring method. Withthis system, We could measure displacement of the object in the range of 45mm having 150mm having 150 .mu. m resolution with no scratch or distortion.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.4
• /
• pp.286-293
• /
• 2010

There are two major conventional quantization algorithms: resolution-constrained quantization (RCQ) and entropy-constrained quantization (ECQ). Although RCQ works well for fixed transmission-rate, it produces the distortion outliers since the cell sizes are different. Compared with RCQ, ECQ has the constraints on the cell size but it produces the rate outliers. We propose the cell-size constrained vector quantization (CCVQ) that improves the generalized Lloyd algorithm (GLA). The CCVQ algorithm is able to make a soft-decision between RCQ and ECQ by using the flexible penalty measure according to the cell size. Although the proposed method increases the small amount of overall mean-distortion, it can reduce the distortion outliers.