• ETRI Journal
• /
• v.34 no.1
• /
• pp.114-117
• /
• 2012

A small-sized ($15mm{\times}30mm$) planar monopole MIMO antenna that offers high-isolation performance is presented in this letter. The antenna is miniaturized using inductive coupling within a meander-line radiator and capacitive coupling between a radiator and an isolator. High isolation is achieved by a T-shaped stub attached to the ground plane between two radiators, which also contributes to the small size using a folded structure and the capacitive coupling with radiators. The proposed antenna operates for the WLAN band within 2.4 GHz to 2.483 GHz. The measured isolation (S21) is about -30 dB, and the envelope correlation coefficient is less than 0.1.

• Journal of Korean Vacuum Science & Technology
• /
• v.7 no.2
• /
• pp.39-44
• /
• 2003

Recent ULSI and multilevel structure trends in microelectronic devices minimize the line width down to a quarter micron and below, which results in the high current densities in thin film interconnections. Under high current densities, an EM(electromigration) induced failure becomes one of the critical problems in a microelectronic device. This study is to improve thin film interconnection materials by investigating the EM characteristics in PSG(phosphosilicate glass)/SiO$_2$ passivated Al-l%Si thin film interconnections. Straight line patterns, wide and narrow link type patterns, and meander type patterns, etc. were fabricated by a standard photholithography process. The main results are as follows. The current crowding effects result in the decrease of the lifetime in thin film interconnections. The electric field effects accelerate the decrease of lifetime in the double-layered thin film interconnections. The lifetime of interconnections also depends upon the current conditions of P.D.C.(pulsed direct current) frequencies applied at the same duty factor.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.363-368
• /
• 2008

This paper presents a miniaturization design technique of radio frequency identification (RFID) tag antenna operated in 910 MHz band. Miniaturization structure design for a tag antenna is performed by structure application of the folded dipole and meander line. In order to realize the maximum power transmission, imaginary part of a chip impedance and a tag antenna impedance is matched by complex conjugate number. The optimized tag antenna size is $50\;nm\;{\times}\;40\;nm\;{\times}\;1.6\;nm$ and its size is reduced about 62 % comparison with antenna size of reference [4]. The measured results of fabricated tag antenna are confirmed the reasonable agreement with prediction. The read range of the tag antenna with chip observed about 5 m.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.288-294
• /
• 2004

In this paper, a ceramic antenna and diplexer are designed for dual-band handset ap plications. Basically, the antenna is designed by using the meander line configuration. The diplexer presented in this paper is composed of both low- and high-pass filters. We have designed the low- and high-pass filters with attenuation poles to improve the attenuation performances of the diplexer. The attenuation poles are located at each rejection frequency region so as to improve the shrinkage characteristic of the diplexer. In order to accomplish the volume effectiveness, the antenna and the diplexer have been designed and fabricated in a multi-layer structure. The diplexer designed with a multi-layer structure has inductors and capacitors, which are implemented by LTCC (Low Temperature Co-fired Ceramics) process technique. Design of the multi-layer antenna and diplexer has been achieved by employing the full 3-D EM simulation. The designed antenna and diplexer offer excellent return loss and broadband performances with highly isolated rejection performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.121-126
• /
• 2022

This study is about an antenna implemented in the form of a monopole having a hexagonal symmetric pattern by simplifying the modified Hilbert curve fractal monopole structure. The modified Hilbert curve fractal monopole structure was simplified and miniaturized, and the radiator was implemented in a hexagonal symmetrical pattern to improve performance. The dielectric constant of substrate is 4.7, and the total line length with a meander-shaped symmetrical structure is 59 mm. The size of the antenna is 10 mm × 10 mm × 0.8 mm, and the line width is 0.4 mm. The size of the antenna measuring jig is 64 mm × 21 mm × 1 mm. The resonant frequency is 1.57 GHz, and the frequency range is 1.51 to 1.615 GHz. The frequency bandwidth is 105 MHz. As for the antenna gain, the measurement gain of the YZ-plane was 2.32 dBi, and that of the XZ-plane was -1.03 dBi. As a result, we confirmed that antenna miniaturization is possible using a hexagonal symmetric pattern fractal structure. In addition, we confirmed that the antenna performance can be easily improved by changing the structure of the radiator.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.232-237
• /
• 2024

In this paper, a broadband double dipole quasi-Yagi antenna using a 4×2 meander line array structure for maintaining 8 dBi gain was studied. The 4×2 meanderline array structure consists of a unit cell in the shape of a meanderline conductor, and it was placed above the second dipole antenna of the double dipole quasi-Yagi antenna. A double dipole quasi-Yagi antenna with generally used multiple strip directors was designed on an FR4 substrate with the same size, and the input reflection coefficient and gain characteristics were compared. Comparison results showed that the impedance frequency bandwidth increased by 6.3% compared to when using the multiple strip directors, the frequency bandwidth with a gain of 8 dBi or more increased by 10.1%, and average gain also slightly increased. The frequency band of the fabricated antenna for a voltage standing wave ratio less than 2 was 1.548-2.846 GHz(59.1%), and gain was measured to be more than 8 dBi in the 1.6-2.8 GHz band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.298-304
• /
• 2007

In this paper, the antenna which has a multiband operation (GSM850, EGSM, DCS1800, USPCS, W-CDMA) is proposed. This antenna was designed by the commercial software HFSS 3-D EM simulator, and it is organized by using a meander branch structure which has a via and lines on FR-4$(\varepsilon_r=4.4)$ substrate. Especially, it has a gap feeding structure which makes good operation at overall bandwidth. The designed antenna is manufactured by PCB processing, and measured by using a network analyzer and a test chamber. The manufactured antenna with the dimension of 8 mm width, 20 mm height and 3.2 mm thickness is able to applied as an internal antenna for multiband mobile phones.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.885-894
• /
• 2015

In this paper, it can be applied to a walkie-talkie, the RFID / USN 920 MHz band(917~923.5 MHz) and WiFi 2.4GHz band(2.4~2.483 5GHz) return loss is 10 dB over the band, on-board dual band with omni-directional radiation characteristics is proposed. The basic structure designed antenna is used meander monopole antenna. It was used as double stubs and tabs for antenna designs that meet the criteria proposed. The double stub and the tab affects the reactance of the antenna to form a common-mode and differential-mode in the stub to improve the antenna characteristics and return loss in the bandwidth, gain and radiation characteristics. The system size of walkie-talkie is $52{\times}77mm^2$, the size of the antenna is limited to $52{\times}15mm^2$, the thickness of FR4 dielectric substrate is 0.8 mm, FR4 dielectric constant 4.4 is used. For experimental results, the return loss is measured more than 10 dB, the maximum gain is measured 1.95 dB, the maximum bandwidth is measured 360 MHz, the radiation characteristic is measured omni-directional. By a walkie-talkie terminal design applying the results of the paper, the handset's price competitiveness and production efficiency can be improved.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.303-313
• /
• 2014

The spatial distribution characteristic of fish community were investigated at the 10 habitat types in the Nonsan stream from August, 2008 to June, 2009. The collected species during the surveyed period were 26 species belong to 6 families. Korean endemic species were Sarcocheilichthys nigripinnis morii, Squalidus japonicus coreanus, Hemiculter eigenmanni, Pseudobagrus koreanus, and Odontobutis interrupta which showed 19.2% ratio of total species. Dominant species was Zacco platypus, and subdominant species was Tridentiger brevispinis. Dominant species according to habitat types were Micropterus salmoides(substrate type pool and rock type pool), Lepomis macrochirus(channel connected pool and channel unconnected pool/abandoned type pool), T. brevispinis(channel unconnected pool/overflow type and run) and Z. platypus(riffle, meander type pool, side channel, and dam type pool). As a results of community analysis in side channel, diversity index showed relatively high values, indicating that habitat types in the Nonsan stream have relatively stable community structure. Bray-curtis cluster analysis indicated that the meander type pool and riffle showed the most similar values(80.8%). Moreover, cluster and principal component analysis were classified as 2 groups(lotic and lentic habitats).

• Journal of Korean Society on Water Environment
• /
• v.24 no.2
• /
• pp.206-213
• /
• 2008

Fish fauna and community structure were investigated at 2003, 2004 and 2006 in Lake Paldang and its inflows. In this survey, we collected 54 species belong to 14 families. Family Cyprinidae take 51.9% (28 species), Cobitidae and Gobiidae occupied 7.4% (each 4 species), respectively. E. erythropterus (11.8%) was dominant species and L. macrochirus (10.2%), designated as an ecosystem-invasive alien fish species by Ministry of Environment, M. yaluensis (9.1%), Z. platypus (7.7%) and R. brunneus (6.7%) were dominated in turn. H. molitrix, C. lutheri, P. altivelis, S. microdorsalis, L. costata. S. gracilis majimae, A. rivularis, P. koreanus. S. scherzeri and O. platycephala were rare species (less than 0.1% in relative abundance). In-lake area, 36 species of fishes belonging to 11 families were collected, and 48 species of 13 families were from inflows. The number of Korean endemic species were 19 species (35.2%), and 4 kinds of exotic species (7.4%), that is, C. cuvieri, H. molitrix, L. macrochirus and M. salmoides were found at this survey area. It was revealed by the analysis of fish community that diversity and richness indices were prominent at tributaries, and dominance index was high at the main body of Lake Paldang. Fish fauna showed rapid decline after dam construction which make the mid-Han river systems to lentic ecosystem, so many of meander-riffle fishes were disappeared dramatically. But after 1990s when installation of small scale wastewater treatment plants started in watershed, the water quality of small tributaries was improved. And also, expansion of the natural macrophytic vegetation of littoral zone should contribute to the development of diverse fish fauna in Lake Paldang.