• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.224-228
• /
• 2002

We investigated the quench properties of superconducting fault current limiters (SFCLs) connected in parallel. It was carried out as an effort to scale up the current capacity of SFCL toys texts. SFCLs were based on $YBa_2$$Cu_3$$O_{7}$ films coated in-situ with a gold layer and fabricated by patterning the films into 2 mm wide and 42 cm long meander lines by photolithography. Two SFCLS were connected in parallel and tested with simulated AC fault currents. Initially the current was divided unequally into branches of parallel connection due to unequal resistance of the branches. However, once quench started in the SFCLs, the current oscillated between the branches and then was distributed nearly equally between the branches. In other words, the elements quenched simultaneously. The oscillation amplitude decreased as the source voltage was increased: the oscillation was the most prominent near the quench current. The observed oscillation and the consequent simultaneous quench was understood in terms of quench start and development in the SFCLs.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1335-1339
• /
• 2004

A hydro-geomorphologic change in a sand bed channel reach and vegetation expansion by changes in the How regime is analyzed in this study. Field and aerial photo surveys, basic hydrological analysis about flow regime change due to two dams, Andong Dam and Imha Dam, on the upstream river and computer modeling are conducted. Two Dams in the study reach have obviously affected downstream channel in many ways including the bed particle coarsening, vegetation expansion on the sandbars and following river channel braiding. The phenomenon of no vegetation on the large point bar in front of Hahwe Village seems due to disturbance of the sandbar surface probably due to the cross flow in the meander reach during the flood. Another reason for no vegetation is that the sandbar on this reach has lower subsurface water lovels, as compared with the others in the up- and downstream of the reach where vegetation expanded, which would hinder vegetation from germinating and growing on the sandbar.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.287-290
• /
• 2003

For microwave device applications, c-axis oriented high temperature superconducting YBa$_2$Cu$_3$O$_{7-{\delta}}$ (HTS-YBCO) epitaxial thin films on the r-cut sapphire substrate(Al$_2$O$_3$) were prepared. In order to reduce the lattice mismatch with a substrate and to enhance the crystallity of HTS thin films, CeO$_2$ buffer layer on the r-cut sapphire substrate was grown by the RF-magnetron sputtering. The YBCO films on the CeO$_2$ buffer layer were deposited using the pulsed-laser deposition (PLD) method. These HTS YBCO /CeO$_2$/Al$_2$O$_3$ multilayer thin films(30 $\times$ 30 mm$^2$) routinely exhibited a critical temperature(T$_{c}$) of 89 K from the R-T measurement. Using HTS YBCO/CeO$_2$ /Al$_2$O$_3$ multilayer thin film. We fabricated and characterized the microwave passive devices (planar type filters) with cryopack-age such as the coupled -line type low-pass filter (LPF) and the open-loop meander type bandpass filter (BPF).filter (BPF).).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.20-23
• /
• 2003

The operational characteristics of flux-lock type high-Tc superconducting fault currentlimiters(HTSC-FCLs) was described and currents equation at each coil was derived from equivalent circuit. $YBa_{2}Cu_{3}O_{7-x}$(YBCO) thin film was used as the current limiting elements of the flux-lock type HTSC-FCL, which were fabricated by etching the YBCO thin film into 2 mm wide and 420 mm long meander line consisting of foureen stripes with different length. The 2nd peak on the current of coil 2 after a fault disappeared by current of the 3rd winding, which was installed in the flux-lock type HTSC-FCL.

• 한국전자파학회논문지
• /
• 제23권4호
• /
• pp.441-448
• /
• 2012

본 논문에서는 소형 USB dongle에 적용을 위한 다중 대역 MIMO 안테나를 제안하였다. 제안된 MIMO 안테나는 변형된 미엔더 라인과 역 L형 스터브로 구성되어 있으며, 접지면을 기준으로 서로 대칭적으로 상 하단에 위치한다. 구현된 안테나는 LTE 13, 17 대역(704-787 MHz), DCS/PCS/WCDMA 대역(1.71-2.17 GHz), LTE 7 대역(2.5-2.7 GHz) 대역에서 VSWR 3:1을 만족하였다. 효율 특성은 전체 주파수 대역에서 평균 35 % 이상의 값을 갖고, 상관 계수는 LTE 13, 17 대역에서 0.45 이하, DCS/PCS/WCDMA 및 LTE 7 대역에서 0.1 이하의 값을 갖는다.

• 한국산업정보학회논문지
• /
• 제12권4호
• /
• pp.119-125
• /
• 2007

본 논문에서는 블루투스용 초소형 PCB 일체형 안테나를 제안하였다. 제안된 안테나는 인쇄형 역 F 안테나의 공진부 선로를 미앤더 형태로 변형함으로써 크기를 소형화한 구조이다. 안테나의 치수는 널리 사용되는 상용 소프트웨어인 MWSTM를 사용하여 최적화하였다. VSWR 3.5 기준으로 $2.38GHz{\sim}2.45GHz$ 범위의 주파수를 만족시켜 3%의 대역폭을 만족하고 중심주파수에서 최대 VSWR 2.4의 값을 가지며 -0.23dBi의 이득 특성을 보였다. 제안된 안테나의 크기는 $9.65mm{\times}5.95mm$로서 기존의 인쇄형 역 F안테나와 비교 할 때 55%의 면적으로 소형화된 것이다.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.220-226
• /
• 2011

We have proposed a new method to accurately predict the resonance of Fabry-Perot Cavity (FPC) antennas enclosed with conducting side walls. When lateral directions of an FPC antenna are not blocked with metallic walls, the conventional technique is accurate enough to predict the resonance of the FPC antenna. However, when the FPC antenna has side walls, especially for case with only a short distance between the walls, the conventional prediction method yields an inaccurate result, inevitably requiring a tedious, time-consuming tuning process to determine the correct resonant height to provide the maximum antenna gain in a target frequency band using three-dimensional full-wave computer simulations. To solve that problem, we have proposed a new resonance prediction method to provide a more accurate resonant height calculation of FPC antennas by using the well-known resonance behavior of a rectangular resonant cavity. For a more physically insightful explanation of the new prediction formula, we have reinvestigated our proposal using a wave propagation characteristic in a hollow rectangular waveguide, which clearly confirms our approach. By applying the proposed technique to an FPC antenna covered with a partially reflecting superstrate consisting of continuously tapered meander loops, we have proved that our method is very accurate and readily applicable to various types of FPC antennas with lateral walls. Experimental result confirms the validness of our approach.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.83-85
• /
• 2015

본 연구는 수중운동체의 시뮬레이터를 개발하기 위한 기초연구로 수행되어졌다. 미국의 해군수중 무기센터에서 개발중인 Manta형 모양의 무인잠수정을 연구를 위한 기본 모델로 채택하였다[1]. 시뮬레이션은 수중운동체의 조종운동 특성을 고려하여 대각도 운동을 포함하는 6자유도 운동방정식을 사용하였으며, 이때에 사용된 유체력미계수도 대각도와 일반각도를 분류하여 사용하였다[2]. 수치시뮬 레이션은 수평 및 수직 선회 시험, 수평 및 수직 지그재그 시험, 부상운동, 미앤더(meander) 시험을 실시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.796-798
• /
• 2002

In these days, the interruption capability of some circuit breakers, which are installed in the transmission systems, is getting lower than the magnitude of the fault current because of continuous increase of power demand and relatively short power line which was installed in forms of mesh network As a result of these situations, fault current limiters (FCLs) are strongly necessary. There are various types which is investigated around the world, and new power apparatuses that have been newly considered and developed by many manufactures. In this paper, we considered resistive superconducting fault current limiters with YBCO thin films. The resistive limiters utilize a transition of YBCO films from superconducting to normal state caused by exceeding the critical current. By means of newly occurred impedance, the fault current will be limited effectively. Generally, a few current path patterns are available for YBCO films to enhance the current limiting performance of YBCO films. In this paper. the meander-type and the bi-spiral-type were used for current paths of YBCO flims. When YBCO films are quenched into the normal state, bubbles could be observed on the surface of YBCO films. Using our high-speed camera, the number of bubbles and the size of bubbles could be visualized and the relation between bubbles and current density was analyzed. By means of moving pictures of bubbles, we observed how the quench extended or how the heat was conducted in films.

• 한국전자파학회논문지
• /
• 제23권2호
• /
• pp.135-143
• /
• 2012

본 논문은 안테나 구조 없이 리액티브 소자 만을 이용하여 단말기 그라운드를 방사체로 활용하는 방법을 소개한다. 안테나의 특성은 블루투스 대역에서 동일 그라운드 면적($40{\times}20mm^2$)을 가지는 미앤더 IFA와 비교하여 분석하였다. 시뮬레이션 및 측정을 통해 캐패시터 소자 만을 이용한 안테나가 가장 높은 방사 효율을 나타내는 것으로 판명되었다. 이는 안테나의 인덕턴스가 높을수록 그라운드의 방사 저항이 감소하고, 캐패시터의 손실 저항이 인덕터 또는 IFA보다 낮기 때문이다. 높은 방사 효율에도 불구하고 제안하는 안테나의 면적($5{\times}2.5mm^2$)은 IFA의 면적($12{\times}2.5mm^2$)의 반 이하이다.