• 제목/요약/키워드: meander

검색결과 288건 처리시간 0.027초

고온 초전도체를 이용한 이동통신 기지국용 영역통과 필터에 관한 연구 (High-temperature superconducting band-pass filters for digital cellular communication system)

  • 이종현;도영호;곽준식;김채옥;홍진표;이경림;한석길;차국린
    • Progress in Superconductivity
    • /
    • 제4권2호
    • /
    • pp.132-136
    • /
    • 2003
  • Extremely selective high temperature superconducting (HTS) band -pass filters were developed for the base transceiver station applications of Digital Cellular communication Service (DCS). The filters have a bandwidth of 25 MHz at a center frequency of 834 MHz. There are 12 resonators which have spiral-meander microstrip-line structures in order to reduce far-field radiations with a reasonable tunability. As a result, the size of filters is 5 mm $\times$ 17 mm $\times$ 41 mm. Device characteristics exhibited a low insertion loss of -0.4 dB with a -0.2 dB ripple and a return loss better than -10 dB in the pass-band at 65 K. The out-of-band signals were attenuated better than 60 dB about 3.5 MHz from the lower band edge, and 3.8 MHz from the higher band edge.

  • PDF

Recent Advances in Sedimentation and River Mechanics

  • Pierre Julien
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2002년도 학술발표회 논문집(I)
    • /
    • pp.3-16
    • /
    • 2002
  • This article describes some of the recent and on-going research developments of the author at Colorado State University. Advances in the field of sedimentation and river mechanics include basic research and computer modeling on several topics. Only a few selected topics are considered here: (1) analytical determination of velocity profiles, shear stress and sediment concentration profiles in smooth open channels; (2) experiments on bedload particle velocity in smooth and rough channels; (3) field measurements of sediment transport by size fractions in curved flumes. In terms of computer modeling, significant advances have been achieved in: (1) flashflood simulation with raster-based GIOS and radar precipitation data; and (2) physically-based computer modeling of sediment transport at the watershed scale with CASC2D-SED. Field applications, measurements and analysis of hydraulic geometry and sediment transport has been applied to: (1) gravel-bed transport measurements in a cobble-bed stream at Little Granite Creek, Wyoming; (2) sand and gravel transport by size fraction in the sharp meander bends of Fall River, Colorado; (3) changes in sand dune geometry and resistance to flow during major floods of the Rhine River in the Netherlands; (4) changes in hydraulic geometry of the Rio Grande downstream of Cochiti Dam, New Mexico; and (5) analysis of the influence of water temperature and the Coriolis force on flow velocity and sediment transport of the Lower Mississippi River in Louisiana. Recent developments also include two textbooks on "Erosion and Sedimentation" and "River Mechanics" by the author and state-of-the-art papers in the ASCE Journal of Hydraulic Engineering.

  • PDF

마이크로 자기탄성스트레인센서의 고감토화 (Improvement of Sensitivity in Micro Magnetoelastic Strain Sensors)

  • 신광호;허진;최헌일;김영학;사공건
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.423-426
    • /
    • 2001
  • Recently we have reported that the meander-patterned amorphous FeCoSiB films exhibit large change in their high frequency impedance by applying a strain, suggesting that the films are very attractive for making of a highly sensitive strain sensor elements. In this study, the effect of anisotropy on a change in the impedance of sputtered amorphous film patterns was investigated in the frequency range from 1MHz to 1GHz. As a function of applied strains, the high frequency impedance was extremely changed in the case of film patterns with transverse anisotropy due to excellent magnetomechanical coupling properties. As a summary, the maximum figure of merit f has measured about 2600 in the case of transverse anisotropy, and about 500 in the case of longitudinal anisotropy at 500 MHz. These values of F are approximately more than 1000 times higher than that of a conventional metal strain gauge (F 2) and more than 10 times higher than that of a semiconductor gauge (F 200).

  • PDF

Fault Current Limiting Characteristics of Flux-lock Type SFCL with Several Secondary Windings

  • Lim, Sung-Hun;Park, Chung-Ryul;Han, Byoung-Sung;Park, Hyoung-Min;Cho, Yong-Sun;Choi, Hyo-Sang
    • Transactions on Electrical and Electronic Materials
    • /
    • 제6권5호
    • /
    • pp.193-197
    • /
    • 2005
  • We investigated fault current limiting characteristics of the flux-lock type superconducting fault current limiter (SFCL), which consisted of a primary winding and several secondary windings connected in series between $high-T_C$ superconducting (HTSC) thin films. Each YBCO thin film has a 2 mm wide and 42 cm long meander line with 14 stripes of different length. The power imbalance due to the slight difference of Ie between YBCO current limiting elements causes the significant power burden on YBCO element with lower $I_C$. We confirmed from our experiments that the mutual coupling between the primary winding and secondary windings of the flux-lock type SFCL reduced the power imbalance between YBCO current limiting elements compared with the resistive type SFCL connected in series.

A Relationship between the Sea Level Variations in the Korea Strait and the Tokara Strait in the Kuroshio region

  • Hong Chul-Hoon
    • Fisheries and Aquatic Sciences
    • /
    • 제1권1호
    • /
    • pp.113-121
    • /
    • 1998
  • A relationship between sea level variations in the Korea Strait (the western and the eastern channels) and the Tokara Strait in the Kuroshio region is examined using daily-mean sea level data from 1966 to 1986. The seasonal variation of the sea level difference (SLD) between Izuhara and Pusan (the western channel) is most periodic: the positive anomalies appear from summer to autumn, and the negative anomalies from winter to spring year to year, whereas SLDs neither between Hakata and Izuhara (the eastern channel) nor between Naze and Nishinoomote (the Tokara Strait) show such a periodic variation. Much similarity has been found between SLDs in the eastern channel and the Tokara Strait, and in particular they were closely correlated in a special event of the Kuroshio region, such as a large meander of the Kuroshio. This paper shows that the periodic seasonal variation of the SLDs in the western channel should be less related to the Kuroshio region. This result also implies that the variation of SLD in the western channel is largely influenced by local factors, such as the bottom cold water in the western channel in summer, rather than from the Kuroshio region.

  • PDF

차량용 통합 능동형 안테나의 설계 및 제작 (Design and Implementation of An Active Antenna for Vehicle)

  • 김상욱;고민호;조윤현;박효달
    • 한국ITS학회 논문지
    • /
    • 제8권4호
    • /
    • pp.39-45
    • /
    • 2009
  • 본 논문은 기생면을 이용한 마이크로 스트립안테나 형태로 소형화 된 방사체와 증폭단를 결합하여 AM/FM 대역, DMB 대역 및 GPS 대역을 수신할 수 있는 차량용 통합 안테나를 설계 및 제작 하였다. 제작한 능동형 안테나는 AM/FM 대역에서 기존의 평면형 안테나에 비해 15% 이상의 크기 축소 효과를 나타내었다. 또한 상용 헬리컬 안테나와 동등한 수신 성능 특성을 나타내었며 DMB 및 GPS 대역에서도 만족할만한 수신 성능 특성을 나타내었다. 제작된 능동형 안테나의 크기는 $133{\times}31{\times}1.2mm$이고, 단일 입력 단자와 2개의 출력 단자를 갖는다.

  • PDF

Resistance Distribution in Thin Film Type SFCL Elements with Shunt Layers of Different Thicknes

  • Kim, Hye-Rim;Hyun, Ok-Bae;Lee, Seung-Yup;Yu, Kwon-Kyu;Kim, In-Seon
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제5권2호
    • /
    • pp.41-45
    • /
    • 2003
  • Resistance distribution in thin film type SFCL elements of different shunt layer thickness was investigated. The 300 nm thick film of 2 inch diameter was coated with a gold layer and patterned into 2 mm wide meander lines. The shunt layer thickness was varied by ion milling the shunt layer with Ar ions, and also by having the shunt layer grown in different thickness. The SFCL element was subjected to simulated AC fault current for measurements. It was immersed in liquid nitrogenduring the experiment. The resistance distribution was not affected by the shunt layer thickness at applied voltages that brought the temperature of the elements to similar values. This result could be explained with the concept of heat transfer from the film to the surroundings. The resistance distribution was independent of the shunt layer thickness because thick sapphire substrates of high thermal conductivity dominated the thermal conductance of the elements.

초전도 한류기용 YBCO 박막 전류 Path Pattern 개발 (Development of new current path pattern of YBCO thin films for Superconducting fault current limiters)

  • 이방욱;강성종;박권배;오일성
    • Progress in Superconductivity
    • /
    • 제6권2호
    • /
    • pp.113-117
    • /
    • 2005
  • In this study, electromagnetic analysis of current paths including meander pattern, spiral pattern, and bi-spiral pattern were performed and in order to verity the analysis results, experiments tests including quench test, and insulation tests were performed. In addition, bubble corner concepts were introduced to enhance insulation reliability. From our study, bi-spiral pattern of YBCO thin films were rather effective for quench and insulation than the other patterns. So this current path pattern was adopted for YBCO thin films in order to develop 6.6 kV resistive fault current limiters. Finally YBCO thin films were connected in series and parallel to enhance capacity, and the test results of current limiting characteristics of 6.6kV resistive SFCL were successful. The Progress in Superconductivity is published every six month and serves as a channel for publications on superconductivity and related topics. The author(s) are required to submit THREE copies of the manuscripts along with original figures directly to the Editor.

  • PDF

Design and Implementation of Broadband Antenna and Diplexer for Dual- Band Handsets

  • Joung, Myoung-Sub;Park, Jun-Seok;Kim, Hyeong-Seok;Lim, Jae-Bong;Cho, Hong-Goo
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제4C권6호
    • /
    • pp.288-294
    • /
    • 2004
  • In this paper, a ceramic antenna and diplexer are designed for dual-band handset ap plications. Basically, the antenna is designed by using the meander line configuration. The diplexer presented in this paper is composed of both low- and high-pass filters. We have designed the low- and high-pass filters with attenuation poles to improve the attenuation performances of the diplexer. The attenuation poles are located at each rejection frequency region so as to improve the shrinkage characteristic of the diplexer. In order to accomplish the volume effectiveness, the antenna and the diplexer have been designed and fabricated in a multi-layer structure. The diplexer designed with a multi-layer structure has inductors and capacitors, which are implemented by LTCC (Low Temperature Co-fired Ceramics) process technique. Design of the multi-layer antenna and diplexer has been achieved by employing the full 3-D EM simulation. The designed antenna and diplexer offer excellent return loss and broadband performances with highly isolated rejection performance.

유로 만곡부의 수리 및 계량형태학적 특성 (Hydraulic and Morphometric Characteristics of the Channel Bends)

  • 송재우
    • 대한토목학회논문집
    • /
    • 제12권3호
    • /
    • pp.173-180
    • /
    • 1992
  • 자연 하천의 전형적인 특성인 하도사행으로 인한 만곡부의 수리 및 계량형태학적 특성을 확정론적 방법으로 구명하였다. 새로운 특성인자로 단변형상계수(As)을 제안했으며 하도구간에서의 As의 변화는 모든 유로에서의 수류력의 집중위치를 확인시켜주고 만곡의 영향이 단면형상의 변화에 미치는 영향을 정량적으로 보여주었다. 또한 기존의 사행특성인자와의 상관분석을 통하여 적용성을 입증하였다. 곡률비 R/W이 2-4에 집중되어있고 이는 제방의 침식이나 파제의 가능성이 있음을 보여주는 수치임을 알수있고 횡단면 하상의 변화를 예측할수있는 Bendegom의 식이 본 연구대상 하천에도 적용될수 있음을 밝혔다.

  • PDF