• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.248-256
• /
• 2010

Acoustic side-aspect target strength (TS) of living Japanese anchovy (Engraulis japonicus) was measured at 120kHz during in situ experiments. The data were collected by lowering and horizontally projecting the splitbeam transducer into the anchovy school. For analysis and interpretation of the side-aspect TS data, acoustic theoretical model, based on the fish morphology, and dorsal-aspect TS data were used. Total length of the anchovy ranged from 6.6 to 12.8cm (mean length 9.3cm). The side-aspect TS distributed between -40 and -55dB, has an obvious length dependency. The mean side-aspect TS of the anchovy was -47.8dB, and the TS was about 2dB higher than mean TS generated from dorsal-aspect measurements. With reference to maximum TS, the results of the side-aspect TS were distributed within the range of the theoretical and dorsal-aspect TS. Apparently these tendency indicates that side-aspect TS measured from the study is useful data. These in situ measurements of side-aspect TS can be applied to improve acoustic detection and estimates of the anchovy, and is necessary to measure with a various frequency and length for making enhance data.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.1
• /
• pp.893-906
• /
• 2001

The purposes of this study were to compare pelvic tilt. range of motion(ROM) of hip rotation, and leg length difference before and after manipulation and to investigate correlation between changes of each variables after manipulation of sacroiliac pint in 31 low back pain patients(11 males, 20 females) with sacroiliac pint dysfunction. The sacroiliac pint of patients was manipulated on the side of anterior pelvic tilt, using the technique described by Stoddard(1962) and Greenmann (1996). I used this technique because it usually eliminated sacroiliac Pint dysfunction in one treatment session. SPSS for window computer system was used to analyze the data. Also t-test was performed for comparison of the variables before and after manipulation, and Pearson product-moment correlation analysis and regression analysis were performed for changes of each variables after manipulation. The result were as follows: 1. The pelvic tilt after manipulation was significantly decreased(mean=$2.79^{\circ}$) compared with the pelvic tilt before manipulation(p=.001). 2. The PROM of hip internal rotation ipsilateral to anterior pelvic tilt after manipulation significantly decreased (mean = $1.88^{\circ}$) compared with hip internal rotation before manipulation (p=.008). The PROM of hip internal rotation ipsilateral to posterior pelvic tilt after manipulation significantly increased(mean = $1.29^{\circ}$) compared with hip internal rotation before manipulation (p=.029). 3. The PROM of hip external rotation ipsilateral to anterior pelvic tilt after manipulation significantly increased(mean=$2.42^{\circ}$) compared with the hip external rotation before manipulation(p=$2.42^{\circ}$) compared with the hip external rotation ipsilateral to posterior pelvic tilt after manipulation significantly decreased(mean = $1.84^{\circ}$) compared with the hip external rotation before manipulation (p=.008). 4. Leg length difference after manipulation significantly decreased(mean=2.15 mm) compared with leg length difference before manipulation (p=.008). Regression analysis revealed that a fair correlation was found between change in leg length difference and change in anterior pelvic tilt after manipulation(p=.009). 5. Pearson product-moment correlation coefficient was used to assess differences of the variables after manipulation. A fair correlation was found between change in leg length difference and change in anterior pelvic tilt after manipulation(r=.462, p<.01). A fair correlation was found between change in anterior pelvic tilt and change in hip internal rotation ipsilateral to anterior pelvic tilt(r=.397, p<.05) and between change in anterior pelvic tilt and change in hip external rotation ipsilateral to anterior pelvic tilt(r=.516, p<.01). A fair correlation was found between change in posterior pelvic tilt and changes in hip internal rotation ipsilateral to posterior pelvic tilt (r=.441, p<.05) and between change in posterior pelvic tilt and change in hip external rotation ipsilateral to posterior pelvic tilt(r=.361, p<.05). A fair correlation was found between change in hip internal rotation ipsilateral to anterior pelvic tilt and change in hip external rotation ipsilateral to posterior pelvic tilt(r=.388, p<.05) and between change in hip internal rotation ipsilateral to posterior pelvic tilt and change in hip internal rotation ipsilateral to anterior pelvic tilt(r=.426. p<.05).

• Development and Reproduction
• /
• v.23 no.2
• /
• pp.161-170
• /
• 2019

The purpose of this study is to investigate the development of Coreoleuciscus splendidus egg and larvae morphology in the Ungcheon-stream. C. splendidus eggs were round and ranged in size from 1.86-2.01 mm (mean $1.91{\pm}0.14mm$). Immediately after hatching, the larvae had egg yolk in the abdomen with a total length of 5.27-6.63 mm (mean $5.95{\pm}0.96mm$). On the 10 days after hatching, the latter was 8.44-8.65 mm (mean $8.54{\pm}0.14mm$) in total length, and 5 dorsal fin rays were formed in dorsal fin and 8 caudal fin soft rays were formed in caudal fin. At 88 days after hatching, total length was 26.2-25.7 mm (mean $25.9{\pm}0.35mm$), and scales were formed throughout the body. The fin rays of each part were iii.7 in dorsal fin and iii.6 in anal fin, and finally the external form was the same as the adult fish.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.2
• /
• pp.16-23
• /
• 1998

This paper examines the effects of specimen length and grade on the strength and stiffness properties of structural timber of radiata pine. The tensile strength and modulus of elasticity of 1,902 machine-graded boards with 3.15- and 1.62-m clear span lengths, were determined using a horizontal tension test machine. The mean failure and characteristic stress values for tensile strength show an extremely high dependency on test specimen length. The mean and characteristic values of both modulus of elasticity and tensile strength show significant dependency on machine stress grades.

• ALGAE
• /
• v.18 no.4
• /
• pp.295-299
• /
• 2003

The population dynamics of Ecklonia stolonifera was investigated at Tongyeong coastal area in the South Sea of Korea. The blade length and width, stipe length and diameter, mean total length and mean weight were measured from randomly collected fifty individuals in every month. The plants in Tongyeong population were relatively bigger than those of Busan Korea and Aomori Japan in terms of their blade length and width. The population biomass was low in winter and high in spring and summer. The sporangial sori were found from August to December but prominent in September and October. About 90 % of the Tongyeong population was consisted of one- and two-year old plants and the zoosporangial sori were observed mostly in two-year old plants. It was different from the results of Busan and Aomori population in which the zoosporangial sori were observed from the plants older than three years. The new populations were developed from the zoospores of two-year old plants and their generation time was relatively shorter than those of Busan and Aomori.

• The Journal of Korean Physical Therapy
• /
• v.15 no.3
• /
• pp.166-172
• /
• 2003

The aim of this study is to present the basic reference data of age and specific gait parameters for comparisons of the gait characteristics depended on amputation length of the Unilateral Trans-Tibial Prostheses. The basic gait parameters were extracted from 10 Adult, and 20 below knee(B/K) patients, 50 to 60 years of age using VICON 512 Motion Analyzer. The results were as follows; 1. The mean Cadence of the above knee(A/K) patients and below knee(B/K) patients were $87.77{\pm}8.64$ steps/min, to $99.84{\pm}11.14$ steps/min.(p<0.05) 2. The mean Walking Speed of the above knee(A/K) patients and below knee(B/K) patients were $0.84{\pm}0.15$ m/s, to $0.96{\pm}0.25$ m/s.(p>0.05) 3. The mean Stride Length of the above knee(A/K) patients and below knee(B/K) patients were $1.14{\pm}0.14\;m$, to $1.14{\pm}0.22m$.(p>0.05) 4. The mean maximal angles of joint on the hip flexion motion for different above knee(A/K) patients and below knee(B/K) patients were $34.75{\pm}10.18_{\circ}$, to $32.32{\pm}6.34_{\circ}$.(p>0.05) 5. The mean maximal angles of joint on the knee flexion motion for different above knee(A/K) patients and below knee(B/K) patients were $66.97{\pm}15.08_{\circ}$, to $52.65{\pm}9.21_{\circ}$. (p<0.05) 6. The mean maximal angles of joint on the ankle dorsi-flexion motion for different above knee(A/K) patients and below knee(B/K) patients were $14.41{\pm}4.82_{\circ}$, to $10.04{\pm}3.49_{\circ}$.(p>0.05) 7. The mean maximal angles of joint on the ankle plantar-flexion motion for different above knee(A/K) patients and below knee(B/K) patients were $5.77{\pm}3.17_{\circ}$, to $2.75{\pm}4.49_{\circ}$.(p>0.05)

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.73-89
• /
• 1991

Impression ragistration is an improtant and difficult phase of prosthodontic treatment procedures and a tray of appropriate size and shape is essential to obtain the accurate impression. Particularly, in edentulous patients, the size and forms of their residual alveolar ridges are different from one another. Therefore, in this study, various measurements were taken on the edentulous models. And the measurements were analyzed and compared with one another. The results were as follows ; 1. The mean of denture bearing area was $32.86cm^2$ in the upper jaws, $24.20cm^2$ in the lower jaws and the variation of denture bearing area was greater in the upper than in the lower jaws and in males than in females. 2. The mean of A-P(anteroposterior) ridge length was 48.72mm in the upper jaws, 53.05mm in the lower jaws and that of males was longer than that of females. 3. The mean of most posterior ridge width was 47.23mm in the upper jaws, 58.03mm in the lower jaws and the difference of that between males and females was least in both jaws. 4. In the upper jaws, the mean of ridge width was 29.66mm on anterior 1/4, 42.79mm on middle, 48.95mm on posterior 1/4 line and the mean of palatal height was 4.56mm on anterior 1/4, 10.01mm on middle, 10.84mm on posterior 1/4 line. 5. In the lower jaws, the mean of ridge width was 33.24mm on anterior 1/4, 50.19mm on middle, 59.16mm on posterior 1/4 line and the mean of lingual ridge height was 5.49mm on anterior 1/4, 9.16mm on middle, 16.72mm on posterior 1/4 line. 6. The correlation coefficient(=r) between denture bearing area and A-P ridge length was 0.83 in the upper jaws and 0.75 in the lower jaws. The corelation between denture bearing area and AP ridge length was statistically significant, but, between denture bearing area and A-P ridge length and between A-P ridge length and the most posterior ridge width was not statistically significant in both jaws. 7. Alveolar ridge forms were classified into three(ovoid, "u" shape, and "v"shape) categories. In the upper jaws, ovoid was 66%, "u" shape was 24%, and "v" shape was 10%, in the lower jaws, ovoid was 66.7%, "u" shape was 20%, and "v" shape was 13.3%.

• Journal of radiological science and technology
• /
• v.31 no.3
• /
• pp.277-285
• /
• 2008

As a result of measuring the size of corpus callosum in normal Korean people by using MRI, the following conclusions were obtained. 1. Maximum, minimum, and mean values by the region in whole subjects 1) Anteroposterior length amounted to the mean with 69.30mm, the minimum with 50.70mm, and the maximum with 80.40mm. 2) Diameter of genu amounted to the mean with 11.93mm, the minimum with 6.00mm, and the maximum with 18.50mm. 3) Diameter of mid body amounted to the mean with 7.00mm, the minimum with 3.40mm, and the maximum with 10.40mm. 4) Diameter of narrowing portion amounted to the mean with 4.51mm, the minimum with 0.80mm, and the maximum with 9.50mm. 5) Diameter of splenium amounted to the mean with 12.17mm, the minimum with 6.90mm, and the maximum with 17.20mm. 2. Comparison by region according to the gender in the whole subjects 1) Anteroposterior length was bigger in men than in women, and showed the significant difference depending on gender. 2) Diameter of genu, diameter of mid body, and diameter of narrowing portion were bigger in men than in women, but there was no significant difference. 3) Diameter of splenium was bigger in men than in women, and showed the statistically significant difference. 3. Comparison by region according to the age in the whole subjects 1) Anteroposterior length was the biggest in the 50s at the age, and was smaller in heir 10s than other age levels. In addition, the significant difference was indicated depending on age. 2) Diameter of genu and diameter of mid body were the biggest in their 30s, and were smaller in the 60s than other age levels. And, the statistically significant difference was indicated. 3) Diameter of narrowing portion was the thickest in their 20s, and was thinner in their 60s than other age levels. And, the significant difference was indicated depending on age. 4) Diameter of splenium was the thickest in their 30s, and was thinner in their 10s than other age levels. And, the statistically significant difference was indicated. 4. Correlation by region in whole subjects 1) Diameter of genu showed the statistically significant positive correlation with anteroposterior length. 2) Diameter of mid body showed the statistically significant positive correlation with anteroposterior length and diameter of genu. 3) Diameter of narrowing portion didn't show the statistically significant correlation with anteroposterior length, but showed the statistically significant positive correlation with diameter of genu and diameter of mid body. 4) Diameter of splenium showed the statistically significant positive correlation with anteroposterior length, diameter of genu, diameter of mid body, and diameter of narrowing portion.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.4
• /
• pp.12-19
• /
• 1996

Urban parks, as remnant patches, of two older cities and two new towns can be analyzed by a landscape ecological approach. The index of patch shape, the dispersion of patches, the mean edge length, and the mean patch size of parks of each city are ocmpared. The findings of this study are as follows : 1) The mean edge length of urban parks of older cities is longer than that of new towns : Seoul>Suwon>Bundang>Ansan. 2) The mean patch size of urban parks in Seoul is much greater than those of other cities : Seoul> Ansan>Suwon>Bundang. 3) The index of patch shape of urban parks of older cities is greater than that of new towns : Seoul>Suwon>BundangAnsan. 4) The dispersion of patches is in the order of Bundang >Ansan>Seoul>Suwon. The new towns have relatively even distributions of urban parks than older cities. Further research is required to find out the relationship between the index of patch shape and patch interior dynamics.

• Water for future
• /
• v.18 no.4
• /
• pp.317-325
• /
• 1985

In the analysis, monthly streamflow records atthe gauging station in Nakdong, Han and Geum river were used. Also, the fitness of monthly streamflow to Gamma and Long-normal distribution was tested by Kolomogorv-Smirnov test. The results obtained in this study can be summarized as follws (1) The fitness of monthly streamflow to two-parameter Gamma distribution was tested by Kolomorov-Smirnov test, which fits well to this Gamma distribution (2) The Run-length and Run-sum were simulated by the Gamma model. In this result, run-length and Run-sum of monthly streamflow were fit for Gamma model (3) The mean decreases (increases) the expected surplus (deficit) Run-Sum of the monthly streamflow. The higher the truncation level of negative Run-length and Run-sum the larger is the effect of mean.