• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.732-737
• /
• 2000

The purpose of this study is to compare the SMD(Sauter mean diameter) with different vibrant plates. Each vibrant plates have different surface roughness. Also liquid film thickness are measured for explanation how to concern atomization. Ultrasonic waves is used for vibration. Immersion liquid method is used for the measure of SMD and also liquid film thickness is measured using of point needle method. Distilled water and gasoline fuel are used to liquids. Supplied liquid flow rates are $18{\sim}296cc/min$. Centerline average roughness of vibrant plates are 0.5, 2.0, 4.7, $9.5\;{\mu}m$ and diameter of vibrant plate is 60mm. In result, good atomization of liquid is obtained in widen flow rates. The mean droplet size is increased in orders of 4.7, 2.0. 9.5, $0.5\;{\mu}m$ surface roughness. Distilled water has a big mean droplet size than gasoline fuel in low flow rate. Above the 78cc/min flow rates, distilled water has a small mean droplet size than gasoline fuel. Liquid films changes are measured with ultrasonic power. Also, cavitation effect on sprays is observed.

• Journal of ILASS-Korea
• /
• v.11 no.1
• /
• pp.17-23
• /
• 2006

The influence of fuel spray characteristics on engine performance has been known as one of the major concerns to Improve fuel economy and to reduce exhaust emissions. In general, the UBHC(Unburned Hydrocarbon) emission could be reduced by decreasing the droplet size of the fuel sprays. In PFI (Port Fuel Injection) gasoline engines, the mixture of air and fuel would not be uniform under a certain condition, because the breakup and production of spray droplets are made in a short distance between the fuel injector and intake valve sheat. In this study, were investigated the transient spray characteristics and dynamic behavior of droplets from 2holes-2sprays and 4holes-2sprays type injectors used in PFI gasoline engine. Mean droplet size and optical concentration were measured by LDPA (Laser Diffraction Particle size Analyzer). The variation of droplet mean diameter and optical concentration were measured for understanding the behavior of unsteady spray.

• Imaging Science in Dentistry
• /
• v.44 no.3
• /
• pp.229-236
• /
• 2014

Purpose: To investigate the prevalence of bifid and trifid mandibular canals using cone-beam computed tomography (CBCT) images, and to measure their length, diameter, and angle. Materials and Methods: CBCT images of 500 patients, involving 755 hemi-mandibles, were used for this study. The presence and type of bifid mandibular canal was evaluated according to a modified classification of Naitoh et al. Prevalence rates were determined according to age group, gender, and type. Further, their diameter, length, and angles were measured using PACSPLUS Viewer and ImageJ 1.46r. Statistical analysis with chi-squared and analysis of variance (ANOVA) tests was performed. Results: Bifid and trifid mandibular canals were found in 22.6% of the 500 patients and 16.2% of the 755 sides. There was no significant difference between genders and among age groups. The retromolar canal type accounted for 71.3% of the identified canals; the dental canal type, 18.8%; the forward canal type, 4.1%; and the trifid canal type, 5.8%. Interestingly, seven cases of the trifid canal type, which has been rarely reported, were observed. The mean diameter of the bifid and trifid mandibular canals was 2.2 mm and that of the main mandibular canal was 4.3 mm. Their mean length was 16.9 mm; the mean superior angle was $149.2^{\circ}$, and the mean inferior angle was $37.7^{\circ}$. Conclusion: Bifid and trifid mandibular canals in the Korean population were observed at a relatively high rate through a CBCT evaluation, and the most common type was the retromolar canal. CBCT is suggested for a detailed evaluation of bifid and trifid mandibular canals before mandibular surgery.

• Journal of Chest Surgery
• /
• v.25 no.3
• /
• pp.307-314
• /
• 1992

The internal mammary artery has been advocated for use in bypass grafting owing to its superior long-term patency when compared to saphenous vein grafts. Concern exists that the flow through internal mammary artery may be inadequate during periods of peak myocardial demand when the internal mammary artery graft was used for proximal left anterior descending artery stenosis. This flow adequacy was investigated in 13 consecutive patients with a mean proximal left anterior descending artery stenosis of 84.2% who were selected for coronary bypass using internal mammary artery. We checked flow and diameter of left internal mammary artery without intraluminal dilatation just before anastomosis to left anterior descending artery during cardiopulmonary bypass. Clinical results were evaluated postoperatively with clinical symptoms, echocardiographies, stress tests, and coronary angiographies. The mean internal mammary artery flow measured just before anastomosis was 38ml/ min[range of 20 to 80ml /min] and its mean internal diameter 1.4mm. Maximal workload was improved from preoperative value of 6.3$\pm$2.5METS to postoperative value of 9.1$\pm$1.4 METS in 9 patients who Paired-test can be used. Cardiac symptoms recurred in two patients after bypass surgery, but they were not related to left internal mammary artery grafts. All patients were discharged in postoperatively 9.3 days[range of 7 to 20 days] after operation without mortality. Thus, on the basis of these findings, the internal mammary artery is a reasonable graft that we can routinely use for proximal left descending artery stenosis if internal diameter of the internal mammary artery is more than 1.0mm and its flow is more than 20ml /min at mean arterial pressure of 50 to 60mmHg during cardiopulmonary bypass.

• Journal of Periodontal and Implant Science
• /
• v.50 no.2
• /
• pp.97-105
• /
• 2020

Purpose: The present retrospective clinical study aimed to evaluate and compare the clinical and radiographic parameters, complications, and satisfaction in patients who received fixed prostheses supported by narrow-diameter implants (NDIs) in the anterior and posterior jaw. Methods: Patients aged ≥30 years who had NDI-supported fixed prostheses in the anterior or posterior region of either jaw for at least 2 years were included. Complications such as chipping of the crown; loosening or fracture of the screw, crown abutment, or implant; and loss of retention were recorded. Clinical peri-implant outcomes and crestal bone loss (CBL) were measured. A questionnaire was used to record responses regarding the aesthetics and function of the fixed restorations. Analysis of variance was used to assess the significance of between-group mean comparisons. The log-rank test was performed to analyze the influence of location and prosthesis type on technical complications. Results: Seventy-one patients (mean age: 39.6 years) provided informed consent with a mean follow-up duration of 53 months. Only bleeding on probing showed a statistically significant difference between NDIs in the anterior and posterior regions. The complication rate for NDIs in the posterior region was significantly higher than that for NDIs in the anterior region (P=0.041). For NDIs, CBL was significantly higher around splinted crowns than single crowns (P=0.022). Overall mean patient satisfaction was 10.34±3.65 on a visual analogue scale. Conclusions: NDIs in the anterior and posterior jaws functioned equally well in terms of periimplant soft and hard tissue health and offered acceptable patient satisfaction and reasonable complication rates.

• Fibers and Polymers
• /
• v.3 no.4
• /
• pp.129-133
• /
• 2002

It is well known residual gum exists in degummed or rotted hemp fibers. Gum removal results in improvement in fiber fineness and the properties of the resultant hemp yams. However, it is not known what correlation if any exists between the residual gum content in retted hemp fibers and the fiber fineness, described in terms of fiber width in this paper. This study examined the mean width and coefficient of variation (CV) of fiber width of seventeen chemically rotted hemp samples with reference to residual gum content. The mean and CV of fiber width were obtained from an Optical fiber diameter analyser (OFDA 100). The linear regression analysis results show that the mean fiber width is directly proportional to the residual gum content. A slightly weaker linear correlation also exists between the coefficient of variation of fiber width and the residual gum content. The strong linear co-relation between the mean of fiber width and the residual gum content is a significant outcome, since testing for fiber width using the OFDA is a much simpler and quicker process than testing the residual gum content. Scanning Electron Microscopy (SEM) reinforces the OFDA findings. SEM micrographs show a flat ribbon like fiber cross-section hence the term \"fiber width\" is used instead of fiber diameter. Spectral differences in the untreated dry decorticated skin samples and chemically treated and subsequently carded samples indicate delignification. The peaks at $1370cm^{-1}$, $1325cm^{-1}$, $1733cm^{-1}$, and $1600cm^{-1}$ attributed to lignin in the untreated samples are missing from the spectra of the treated samples. The spectra of the treated samples are more amine-dominated with some of the OH character lost.cter lost.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.25-31
• /
• 2011

This study was conducted to develop the growth model for diameter at breast height (DBH) and basal area (BA) of Larix leptolepis stands grown in eastern mountain areas, Jeollabuk-do and to enhance the precision of the models by adding regional and climatal factors, such as altitude, mean annual rainfall, and mean annual temperature. In results, it was analyzed that Schumacher polymorphic equation might be the best model to estimate DBH and BA growth. In case of the DBH growth model, precision was improved by adding altitude and mean annual rainfall. Moreover, in case of the BA growth model, precision was improved by adding mean annual rainfall. Meanwhile, it would be necessary for more precise model to add various factors, such as stand density, mortality, thinning ratio, and edaphic status along with regional and climatal factors.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.2
• /
• pp.256-262
• /
• 2019

Objective : Pituitary adenomas (PAs) are often detected as incidental findings. However, the natural history remains unclear. The objective of this study was to evaluate the natural history and growth pattern of untreated PAs. Methods : Between 2003 and 2014, 59 PAs were managed with clinico-radiological follow up for longer than 12 months without any kind of therapeutic intervention. Tumor volumes were calculated at initial and last follow-up visit, and tumor growth during the observation period was determined. Data were analyzed according to clinical and imaging characteristics. Results : The mean initial and last tumor volume and diameter were $1.83{\pm}2.97mL$ and $13.77{\pm}6.45mm$, $2.85{\pm}4.47mL$ and $15.75{\pm}8.08mm$, respectively. The mean annual tumor growth rate was $0.33{\pm}0.68mL/year$ during a mean observation period of $46.8{\pm}32.1months$. Sixteen (27%) PAs showed tumor growth. The initial tumor size (HR, 1.140; 95% confidence interval, 1.003-1.295; p=0.045) was the independent predictive factor that determined the tumor growth. Six patients (11%) of 56 conservatively managed non-symptomatic PAs underwent resection for aggravating visual symptoms with mean interval of 34.5 months from diagnosis. By Cox regression analysis, PAs of last longest diameter over 21.75 mm were a significant prognostic factor for eventual treatment. Conclusion : The initial tumor size of PAs was independently associated with the tumor growth. Six patients (11%) of conservatively managed PAs were likely to be treated eventually. PAs of last follow-up longest diameter over 21.75 mm were a significant prognostic factor for treatment. Further studies with a large series are required to determine treatment strategy.

• Imaging Science in Dentistry
• /
• v.53 no.3
• /
• pp.177-191
• /
• 2023

Purpose: This systematic review examined the detection of the posterior superior alveolar artery, along with various anatomic characteristics, on cone-beam computed tomography images. Materials and Methods: Studies were identified electronically through the Web of Science, MEDLINE, Scopus, and Embase databases. The quality of the included studies was evaluated using a 5-item binary scale. The detection rate, location, and classified diameter of the posterior superior alveolar artery were estimated as prevalence values. The diameter of this artery, as well as the distances from the artery to the alveolar crest and sinus floor, were estimated as means with associated 95% confidence intervals. Results: Thirty-seven studies were enrolled, with 34 of these included in the meta-analysis. The mean detection rate was 79% (range: 72%-84%), and the mean diameter was 1.06±0.05 mm (range: 0.96-1.16 mm). The posterior superior alveolar artery was located intraosseously in 64% of cases. The mean distance of the artery from the alveolar crest was 16.71±0.49 mm (range: 15.75-17.68 mm), while the mean distance from the artery to the sinus floor was 8.85±0.4 mm (range: 8.05-9.64 mm). Conclusion: According to the findings of this meta-analysis regarding various anatomic characteristics of the posterior superior alveolar artery, severe hemorrhage after damage to this artery during sinus augmentation procedures is not a substantial clinical problem.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.242-252
• /
• 1998

The inhabitation environments and growth conditions of Machilus thunbergii community in the Pyonsanbando located at southwestern area in Korea were examined and analyzed to provide some practical data to be used to establish measures for long term succession monitoring, protection and sustainable management. The Machilus thunbergii community are located at Kyokpo-ri, Pyonsan-myon, Puan-gun(35$^{\circ}$35′24"N~35$^{\circ}$ 42′30"N, 126$^{\circ}$28′18"E~126$^{\circ}$40′40"E). Within the Pyonsanbando area the mean temperature is 12.4$^{\circ}C$, the warmth index 101.5$^{\circ}C$.month, the coldness index -12.3$^{\circ}C$ month and the annual precipitation 1,016mm. The soil within the community is silt loam or clay loam and so fertile. 30 species and 1 varieties of 21 families inhabited at the community. There were 18 grown trees and 131 saplings of Machilus thunbergii within the community. The mean basal diameter, mean height, and crown width of grown trees was measured to be 57.4cm, 7.4m and 9.0~9.8m respectively. And 9 trees were full flowering, 2 trees small flowering here and there, and 7 trees non flowering in 1998. The mean branch growth length was 8.3cm, mean leaf area 18.3$\textrm{cm}^2$, mean inflorecence length 9.3cm, mean fertilization 14.5％ and mean seed diameter 7.6mm. Further rich management measure and investigation were recommended such as sapling protection, signboard construction, soil erosion controlling and regular monitoring within the community.