• 제목/요약/키워드: mean damage ratio

검색결과 90건 처리시간 0.027초

마그네슘합금의 조성비율에 따른 폭발 및 화염전파 특성 (Properties of Explosion and Flame Velocity with Content Ratio in Mg-Al Alloy Particles)

  • 한우섭;이근원
    • 한국가스학회지
    • /
    • 제16권4호
    • /
    • pp.32-37
    • /
    • 2012
  • 본 연구에서는 폭발사고가 반복되고 있는 마그네슘합금(Mg-Al alloy) 분진의 동종재해 예방대책을 위한 안전자료로 활용하기 위하여 폭발특성을 실험적으로 조사하고 화염전파속도를 추정하였다. 화염전파속도는 폭발과 압력 강도에 영향을 주지만 분진폭발에서는 화염의 확산에 따른 피해예측에도 중요한 자료로 활용될 수 있다. 실험은 마그네슘합금(평균입경 151~161 ${\mu}m$)의 성분비에 따른 폭발특성을 조사하였으며, 밀폐공간의 분진폭발에서 화염전파속도를 계산하기 위하여 분진의 연소시간과 화염면의 도달시간을 고려하고 폭발압력으로부터 추정하는 방법을 사용하였다. 그 결과, Mg-Al(60:40 wt%), Mg-Al(50:50 wt%), Mg-Al(40:60 wt%)의 최대화염전파속도는 각각 15.5, 18, 15.2 m/s가 얻어졌으며 성분비율에 따라 최대화염속도는 변화하는 경향을 나타냈다.

암석시편 파괴에 따른 acoustic emission 특성인자 분석 (Analysis of acoustic emission parameters according to failure of rock specimens)

  • 이종원;오태민;김현우;김민준;송기일
    • 한국터널지하공간학회 논문집
    • /
    • 제21권5호
    • /
    • pp.657-673
    • /
    • 2019
  • 최근 음향방출(Acoustic Emission, AE) 센서를 이용하여 지하 암반 내 구조물의 손상을 평가하는 기법이 활발하게 사용되고 있다. 암반 손상 시 발생되는 미소파괴음은 시간 및 주파수 영역에서 다양한 음향방출 특성인자로 분석된다. 암반 내 초기 균열 발생부터 최종 파괴까지의 특징을 파악하기 위해서는 외부응력 수준과 암반 강도에 따른 음향방출 특성인자 발생 양상을 이해하는 것이 중요하다. 본 연구에서는 경암과 연암 강도를 가진 화강암 시편을 이용하여 일축 압축시험을 수행하여, 암석 시편 파괴 시 발생하는 음향방출 특성인자를 분석하였다. 실험결과, 응력 비율이 증가할수록 이벤트 횟수, 실효값, 최대 진폭, 절대 에너지가 경암 시편에서 연암 시편 보다 높은 경향을 보였다. 또한, 주파수 관련 특성인자는 응력 비율 증가나 시편의 물성특성에 대해 민감도가 낮은 것으로 분석되었다. 본 연구에서 암석 시편 파괴에 따른 음향방출 특성인자 분석 결과, 실효값(RMS)이 가장 민감한 인자로 평가되었다. 본 연구의 결과는 음향방출 기반 모니터링 수행 시 암반 손상 정도 평가를 위하여 유용하게 활용될 수 있을 것으로 기대된다.

오차드그라스의 생산량에 영향을 미치는 기후 및 재배관리의 기여도 분석 (Analysis of Contribution of Climate and Cultivation Management Variables Affecting Orchardgrass Production)

  • 김문주;김지융;조무환;성경일
    • 한국초지조사료학회지
    • /
    • 제43권1호
    • /
    • pp.1-10
    • /
    • 2023
  • 본 연구는 우리나라(1982-2014년)의 오차드그라스 생산량에 대한 기후 및 재배관리 요인의 중요도를 확인하는 것을 목적으로 수행하였다. 기후는 1월 평균기온(MTJ, ℃), 1월 최저기온(LTJ, ℃), 생육일수 0-5일(GD 1, 일), 생육일수 5-25일(GD 2, 일), 하고일수(SSD, day), 강우일(RD, day), 누적강우량(AR, mm), 일조시간(SD, hr)을 고려하였다. 관리는 조성연차(EP, 0-6년)과 예취횟수(NC, 2-5년)를 측정하였다. 퍼셉트론 방법을 사용한 신경망 모델을 사용하여 오차드그라스의 생산량에 대한 중요도를 추정하였다. 그 결과 EP가 가장 중요한 변수(100%)였으며, RD(82.0%), AR(79.1%), NC(69.2%), LTJ(66.2%), GD 2(63.3%), GD 1 순이었다. (61.6%), SD(58.1%), SSD(50.8%) 및 MTJ(41.8%). 이는 EP, RD, AR, NC가 다른 것보다 중요하다는 것을 의미한다. 우리나라의 연간 강수량은 과수원의 생육에 필요한 양을 초과하므로 배수관리를 통해 적정량 이상의 호우로 인한 피해를 줄일 수 있다. 이는 과수원을 재배할 때 통제 가능한 요인이 상대적으로 중요하다는 것을 의미한다. 비록 본 연구가 신경망 모델에 의해 기후가 생산량에 미치는 구체적인 영향을 해석하는데 한계가 있지만, 주요 요인 선정을 통해 향후 수량 예측 및 기후변화에 의한 피해 추정 연구에 도움이 될 것으로 기대된다.

Semi-active eddy current pendulum tuned mass damper with variable frequency and damping

  • Wang, Liangkun;Shi, Weixing;Zhou, Ying;Zhang, Quanwu
    • Smart Structures and Systems
    • /
    • 제25권1호
    • /
    • pp.65-80
    • /
    • 2020
  • In order to protect a structure over its full life cycle, a novel tuned mass damper (TMD), the so-called semi-active eddy current pendulum tuned mass damper (SAEC-PTMD), which can retune its frequency and damping ratio in real-time, is proposed in this study. The structural instantaneous frequency is identified through a Hilbert-Huang transformation (HHT), and the SAEC-PTMD pendulum is adjusted through an HHT-based control algorithm. The eddy current damping parameters are discussed, and the relationship between effective damping coefficients and air gaps is fitted through a polynomial function. The semi-active eddy current damping can be adjusted in real-time by adjusting the air gap based on the linear-quadratic-Gaussian (LQG)-based control algorithm. To verify the vibration control effect of the SAEC-PTMD, an idealized linear primary structure equipped with an SAEC-PTMD excited by harmonic excitations and near-fault pulse-like earthquake excitations is proposed as one of the two case studies. Under strong earthquakes, structures may go into the nonlinear state, while the Bouc-Wen model has a wild application in simulating the hysteretic characteristic. Therefore, in the other case study, a nonlinear primary structure based on the Bouc-Wen model is proposed. An optimal passive TMD is used for comparison and the detuning effect, which results from the cumulative damage to primary structures, is considered. The maximum and root-mean-square (RMS) values of structural acceleration and displacement time history response, structural acceleration, and displacement response spectra are used as evaluation indices. Power analyses for one earthquake excitation are presented as an example to further study the energy dissipation effect of an SAECPTMD. The results indicate that an SAEC-PTMD performs better than an optimized passive TMD, both before and after damage occurs to the primary structure.

A Lower T1 Slope as a Predictor of Subsidence in Anterior Cervical Discectomy and Fusion with Stand-Alone Cages

  • Lee, Su Hun;Lee, Jun Seok;Sung, Soon Ki;Son, Dong Wuk;Lee, Sang Weon;Song, Geun Sung
    • Journal of Korean Neurosurgical Society
    • /
    • 제60권5호
    • /
    • pp.567-576
    • /
    • 2017
  • Objective : Preoperative parameters including the T1 slope (T1S) and C2-C7 sagittal vertical axis (SVA) have been recognized as predictors of kyphosis after laminoplasty, which is accompanied by posterior neck muscle damage. The importance of preoperative parameters has been under-estimated in anterior cervical discectomy and fusion (ACDF) because there is no posterior neck muscle damage. We aimed to determine whether postoperative subsidence and pseudarthrosis could be predicted according to specific parameters on preoperative plain radiographs. Methods : We retrospectively analyzed 41 consecutive patients (male : female, 22 : 19; mean age, $51.15{\pm}9.25years$) who underwent ACDF with a stand-alone polyether-ether-ketone (PEEK) cage (>1 year follow-up). Parameters including SVA, T1S, segmental angle and range of motion (ROM), C2-C7 cervical angle and ROM, and segmental inter-spinous distance were measured on preoperative plain radiographs. Risk factors of subsidence and pseudarthrosis were determined using multivariate logistic regression. Results : Fifty-five segments (27 single-segment and 14 two-segment fusions) were included. The subsidence and pseudarthrosis rates based on the number of segments were 36.4% and 29.1%, respectively. Demographic data and fusion level were unrelated to subsidence. A greater T1S was associated with a lower risk of subsidence (p=0.017, odds ratio=0.206). A cutoff value of T1S<$28^{\circ}$ significantly predicted subsidence (sensitivity : 70%, specificity : 68.6%). There were no preoperative predictors of pseudarthrosis except old age. Conclusion : A lower T1S (T1S<$28^{\circ}$) could be a risk factor of subsidence following ACDF. Surgeons need to be aware of this risk factor and should consider various supportive procedures to reduce the subsidence rates for such cases.

T-2 toxin을 투여한 닭에서 Comet assay 방법을 이용한 DNA 손상 평가와 독성 (Assessment of DNA Damage using an Alkaline Single Cell Gel Electrophoresis (SCGE) Comet Assay and Toxic Effects in Chickens by T-2 Toxin Treatment)

  • 하대식;허정호;이국천;조명희;김국헌;김충희;류재두;이승환;김곤섭;김의경;김종수
    • Toxicological Research
    • /
    • 제22권2호
    • /
    • pp.75-85
    • /
    • 2006
  • This study was designed to evaluate the possible DNA damaging effects of T-2 toxin using an alkaline single cell gel electrophoresis (SCGE) comet assay and also to investigate toxic effects in chickens. A total of 20 chickens were used in these experiments. Graded concentrations of dietary T-2 toxin (0, 4, 8, and $16{\mu}g/g$ of diet) were given to groups of 5 broiler chickens. In comet assay, The DNA damage was analysed by the tail extent moment (TEM) and tail length (TL), which were used as markers of DNA strand breaks in SCGE. A significant dose-dependent increase in the extent of DNA migration as well as in the percentage of cells with tails was observed after treatment with T-2 toxin (P<0.05). Treatment with the low T-2 toxin ($4{\mu}/g$ of diet) induced a relatively low level of DNA damage in comparison with the high T-2 toxin ($16{\mu}/g$ of diet) group. The growth rate was significantly reduced by concentrations of 8, and $16{\mu}/g$ of diet (P < 0.05). The feed conversion ratio were significantly affected by any concentrations (P < 0.05). The relative weight of the spleen, and lung was decreased by the growth inhibitory concentrations. The bursa of Fabricius, thymus, and kid- ney were decreased in relative weight by concentrations of $16{\mu}/g$ of diet. The relative weight of the liver and heart were unaffected. The hemoglobin (Hb), hematocrit (HCT), and mean corpuscular hemoglobin (MCH) were decreased at concentration of $16{\mu}/g$ of diet. As compared with control chickens, there was no marked change in serum components except uric acid in T-2 treated chickens. All lymphoid tissues retained atrophic and lymphoid cell depletion throughout the three weeks trial.

성인 20 세 이상 활로 4징증의 수술성적 (Surgical Correction of Tetralogy of Fallot in Adults over 20 Years of Age)

  • 정윤섭
    • Journal of Chest Surgery
    • /
    • 제23권2호
    • /
    • pp.253-259
    • /
    • 1990
  • Between January, 1970 and August, 1989, a total of 81 patients whose age were more than 20 years of life, received total correction for tetralogy of Fallot. This report analyzed 70 patients among them and excluded the remaining 11 patients whose clinical data could not be found. Their mean age was 25.750.39 years[range 20 \ulcorner50]. The clinical manifestations were cyanosis and clubbing [64 pts], frequent URI[40 pts], anoxic spell [19 pts], infective endo-carditis[4 pts], brain abscess[3 pts], pulmonary tuberculosis[3 pts] and CHF, chest tightness, nephrotic syndrome, left hemiplegia, and tamponade. The types of right ventricular outflow tract obstruction were combined[46 pts], pure infundibular [21 pts] and pure valvular[3 pts]. Associated cardiovascular anomalies were PFO [27 pts], ASDi8 pts], LSVC[8 pts], aortic regurgitation [5 pts], right aortic arch, coronary artery anomalies, PDA and dextrocardia. Hospital mortality was 5.7%. The causes of death ware low cardiac output [2 pts], aggravation of CRF[1 pts] and brain damage[1 pts]. There was one late death because of residual intracardiac shunt and congestive heart failure. During the follow-up period, 16 patients were lost and the remaining 49 patients were asymptomatic and leading normal lives. Residual intracardiac shunt was detected in 5 patients with radionuclide single pass study but all of them had Qp / Qs ratio less than 1.5.

  • PDF

변형 Fontan 수술의 임상적 고찰8 (Clinical Experiences of Modified Fontan Operation in 8 cases)

  • 문경훈
    • Journal of Chest Surgery
    • /
    • 제20권3호
    • /
    • pp.536-543
    • /
    • 1987
  • The Fontan procedure was physiological correction which was initially applied to tricuspid atresia. We had used the modified Fontan operation in 8 cases at National Medical Center, Seoul, from Aug. 1984 to Oct. 1986. Age range was 20 months to 15 years [mean: 9 years] and male: female ratio was 5:3. 5 patients had tricuspid atresia [lb: 2 cases, Ic: 1 case, lib: 1 case, & llc: 1 case], 2 Patients had univentricular heart of left ventricular type, and one patient had transposition of great arteries with complete endocardial cushion defect. The operative principle was direct anastomosis between right atrium and pulmonary artery, whether main pulmonary artery or right pulmonary artery without any conduits. Postoperatively all patients needed high central venous pressure for adequate hemodynamic status in both survival [20-24 CmH2O] and mortality groups [20-24 CmH2O]. The fatal complications were as follows: empyema with bronchopleural fistula [1 case], bleeding tendency & brain damage [1 case], low cardiac output syndrome & acute renal failure [2 cases], and right to left shunt of unknown origin [1 case]. There were 5 hospital deaths; 3 of 5 tricuspid atresia patients, 1 of 2 univentricular heart patients, and 1 of 1 transposition of great arteries with complete endocar4ial cushion defect patient. The overall mortality was 62.5%. 3 survivors were nearly compatible with Choussat & Fontan criteria. Thus appropriate patient selection and experienced surgical technique were required for good results.

  • PDF

소재의 안전전단을 위한 비파괴 압입 및 소형펀치 시험법 연구 (A Study of Non-destructive Indentation and Small Punch Tests for Monitoring Materials Reliability)

  • 옥명렬;주장복;이정환;안정훈;남승훈;이해무;권동일
    • 한국가스학회:학술대회논문집
    • /
    • 한국가스학회 1997년도 추계학술발표회 논문집
    • /
    • pp.78-85
    • /
    • 1997
  • Indentation and small punch tests are very powerful methods to monitor the materials reliability since they are very simple, easy and almost non-destructive. First, recently-developed continuous indentation test can provide the more material properties such as hardness, elastic modulus, yield strength, work-hardening exponent, etc., than the conventional hardness test. In our study, the true stress-strain curve was derived from the indentation load-depth curve for spherical indentation. In detail, the strain was able to be obtained from plastic depth/contact radius ratio, and the flow stress was from mean contact pressure through the analysis of elastic-plastic indentation stress field. Secondly, the small punch test was studied to evaluate the fracture toughness and defomation properties such as elastic modulus and yield strength. Like the indentation test, this test can be applied without severe damage of the target structure.

  • PDF

Energy-based design base shear for RC frames considering global failure mechanism and reduced hysteretic behavior

  • Merter, Onur;Ucar, Taner
    • Structural Engineering and Mechanics
    • /
    • 제63권1호
    • /
    • pp.23-35
    • /
    • 2017
  • A nonlinear static procedure considering work-energy principle and global failure mechanism to estimate base shears of reinforced concrete (RC) frame-type structures is presented. The relative energy equation comprising of elastic vibrational energy, plastic strain energy and seismic input energy is obtained. The input energy is modified with a factor depending on damping ratio and ductility, and the energy that contributes to damage is obtained. The plastic energy is decreased with a factor to consider the reduced hysteretic behavior of RC members. Given the pre-selected failure mechanism, the modified energy balance equality is written using various approximations for modification factors of input energy and plastic energy in scientific literature. External work done by the design lateral forces distributed to story levels in accordance with Turkish Seismic Design Code is calculated considering the target plastic drift. Equating the plastic energy obtained from energy balance to external work done by the equivalent inertia forces considering, a total of 16 energy-based base shears for each frame are derived considering different combinations of modification factors. Ductility related parameters of modification factors are determined from pushover analysis. Relative input energy of multi degree of freedom (MDOF) system is approximated by using the modal-energy-decomposition approach. Energy-based design base shears are compared with those obtained from nonlinear time history (NLTH) analysis using recorded accelerograms. It is found that some of the energy-based base shears are in reasonable agreement with the mean base shear obtained from NLTH analysis.