• 한국식품과학회지
• /
• 제33권2호
• /
• pp.195-199
• /
• 2001

Amylograph를 이용하여 방사선 조사된 검은후추가루의 amylograph characteristics의 변화를 검사하고, 변화된 amylograph characteristics에 의해서 검은후추가루의 검지가 가능한지를 알아보기 위하여 본 실험은 수행되었다. Initial pasting temperatures, maximum viscosity temperatures는 조사선량의 증가에 따른 유의적인 변화가 관찰되지 않았다. Maximum viscosity(P), $93^{\circ}C$ viscosity, $93^{\circ}C$에서 15분 후의 viscosity(H), $45^{\circ}C$ viscosity(C), $45^{\circ}C$에서 30분 후의 viscosity, $45^{\circ}C$에서 60분 후의 viscosity는 조사선량이 증가할수록 감소하는 경향을 보여주었으며, p<0.05의 수준에서 통계적인 유의성이 관찰되었다. 그러나 breakdown(P-H), setback(C-P), 그리고 consistency(C-H)는 조사선량의 증가에 따른 명확한 차이가 관찰되지 않았다. breakdown(P-H)이 0.75, setback(C-P)이 0.88, consistency(C-H)가 0.31의 $R^2$ 값을 보인 것을 제외하고는 모든 amylograph characteristics 의 $R^2$ 값은 0.97 이상의 높은 상관성을 보여 주었다. 따라서 amylograph characteristics에 의해서 검은후추가루의 방사선 조사여부 확인이 가능하였다.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1396-1404
• /
• 2017

The mathematical aspects of Dufour and Soret phenomena on the peristalsis of magnetohydrodynamic (MHD) Jeffrey liquid in a symmetric channel are presented. Fluid viscosity is taken variably. Lubrication approach has been followed. Results for the velocity, temperature, and concentration are constructed and explored for the emerging parameters entering into the present problem. The plotted quantities lead to comparative study between the constant and variable viscosities fluids. Graphical results indicate that for non-Newtonian materials, pressure gradient is maximum, whereas pressure gradient is slowed down for variable viscosity. Also both velocity and temperature in the case of variable viscosity are at maximum when compared with results for constant viscosity.

• 한국식품과학회지
• /
• 제16권1호
• /
• pp.99-107
• /
• 1984

지방질(脂肪質)과 유화제(乳化?)가 보리가루의 점조성에 미치는 영향(影響)을 알아보기 위하여 쌀보리품종(品種)인 백동을 분말로 만들어 각종(各種) 첨가물질(添加物質)을 1%목준(木準)으로 동일(同一)하게 첨가(添加)하고, 그 점조성을 Brabender Amylograph를 사용(使用)하여 측정하였다. 보리가루의 amylogram 점성은 밀가루에 비하여 높으며 최고점도는 밀가루의 3배가 되었다. 유리지방질(遊離脂肪質)을 제거한 보리가루의 점도곡선(曲線)은 탈지(脫脂)하지 않은 것에 비하여 낮게 나타났으며, 호화개시온도와 최고점도가 저하되었다. 이때 추출(抽出)한 유리지방질(遊離脂肪質)을 원래의 수준(水準)으로 다시 첨가(添加)하여 그 점도곡선(曲線)은 탈지(脫脂)하지 않은 보리가루의 점도곡선(曲線)과 잘 일치(一致)되었다. 보리추출지방질(抽出脂肪質)을 결합(結合) 및 유리지방질(遊離脂肪質), 극성(極性) 및 비극성지방질(非極性脂肪質)로 분리(分離)하여 첨가(添加)한 경우 결합지방질(結合脂肪質)의 호화양상은 극성지방질(極性脂肪質)과 비슷한 양상을 나타내었으며, 유리지방질(遊離脂肪質)은 비극성지방질(非極性脂肪質)과 비슷한 양상을 나타내었다. 비극성지방질(非極性脂肪質)의 첨가시(添加時)에는 최점도가 상승되었으며, 극성지방질(極性脂肪質)의 첨가시(添加時)에는 최고점도에 별다른 영향(影響)이 나타나지 않았다. 지방산(脂肪酸)의 첨가시(添加時), 탈지(脫脂)보리가루의 최고점도와 그때의 온도는 상승하는 경향(傾向)이었다. 지방산의 첨가효과(添加?果)는 포화지방산(脂肪酸)보다 불포화지방산(脂肪酸)의 경우 크게 나타났으며, 포화지방산중(脂肪酸中)에서는 팔미트산과 미리스트산의 경우에 가장크게 나타났다. 식물성기름을 첨가(添加)한 경우 호화개시온도는 다소 감소(減少)되었으며, 최고점도와 그때의 온도는 약간 상승되었다. 또한 식물성 기름의 첨가수준(添加水準)을 높이면 최고점도는 다소 감소(減少)되는 경향(傾向)이었다. 유화제(乳化劑)의 첨가(添加)는 탈지(脫脂)한 보리가루에서 보다는 탈지(脫脂)하지 않은 보리가루에서 점도의 상승효과(上昇? 果)가있었다. 탈지(脫脂)보리가루에 있어서 M-ethocel 4000, sodium polyacrlate, calcium stearyl lactyalte는 최고점도를 상승(上昇)시켰으며, 특(特)히 calcium stearyl lactylate는 냉각점도를 크게 상승(上昇)시켰다.

• 한국식품영양학회지
• /
• 제7권4호
• /
• pp.353-360
• /
• 1994

Effect of pH, calcium, sucrose, heating and mixing ratio of soy and cow milk was studied on the viscosity and the sensory characteristics of cow-soy milk. The viscosity of soymilk was significantly affected by pH with showing maximum at 6.0 and the pH effect was decreased as the ratio of cow talk increased. A addition of sucrose or calcium affected little on the viscosity and a negative linear relationship was found be tween viscosity and an increase in cow milk ratio. Sensory characteristics of grassy and beany odor and taste of soymilk were rapidly decreased and nutty flavor and total acceptability were increased during initial 30 min of boiling. A further increase in boiling affected little on tastes and odors of soymilk. The beany odor and taste linearly decreased and milk flavor Increased as the ratio of cow milk increased. The total acceptability of 50 : 50 was found to be maximum for cow and soy mixed milks.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.47-54
• /
• 2001

Prediction of the maximum packing volume fraction with non-spherical particles has been one of the important problems in powder technology. The sphericity of fly ash particles depending on the particle diameter was measured by means of a CCD image processing instrument. An algorithm to predict the maximum packing volume fraction with non-spherical particles is proposed. The maximum packing volume fraction is used to predict the slurry viscosity under well dispersed conditions. For this purpose, Simha's cell model is applied for concentrated slurry with wide particle size distribution. Also, Usui's model developed for aggregative slurries is applied to predict the non-Newtonian viscosity of dense fly ash - water slurry. It is certified that the maximum packing volume fraction for non-spherical particles can be successfully used to predict slurry viscosity. The pressure drop in a pipe flow is predicted by using the non-Newtonian viscosity of dense fly ash-water slurry obtained by the present model. The predicted relationship between pressure drop and flow rate results in a good agreement with the experimented data obtained for a test rig with 50 mm inner diameter tube. Base on the design procedure proposed in this study, a feasibility study of fly ash hydraulic transportation system from a coal-fired power station to a controlled deposit site is carried out to give a future prospect of inexpensive fly ash transportation technology.

• Preventive Nutrition and Food Science
• /
• 제5권1호
• /
• pp.20-24
• /
• 2000

A study was carried out to establish the detection method of irradiated corn, potato, and sweet potato starches. The samples were packed in polyethylene bags and irradiated with 1, 3, 5, 7, 10, and 15 kGy using a Co-60 irradiator. The maximum viscosity of irradiated and unirradiated corn, potato, and sweet potato starches reduced by increase of irradiation dose levels and showed significant differences which clearly showed the effect of irradia-tion dose levels (p<0.05). Regression expressions and coefficients (p<0.000) or corn, potato, and sweet potato starches were y=-38.538x+718.23(r2=0.9761), y=669.97e-0.1372x (r2=0.9820) and y=-42.544x+730.26(r2=0.9939), respectively. Nor-malized parameter A,B and C values showed a dose dependent relationship and were a better parameter for detecting the irradiated starches than that of the maximum viscosity itself.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.429-433
• /
• 2012

Purpose: While rapeseed oil, soy bean oil, palm oil and waste cooking oil are being used for biodiesel, the viscosity of them should be lowered for fuel. The most widely used method of decreasing the viscosity of vegetable oil is to convert the vegetable oil into fatty acid methyl ester but is too expensive. This experiment uses ultrasonic energy, instead of converting the vegetable oil into fatty acid methyl ester, to lower the viscosity of the waste cooking oil. Methods: For irradiation treatment, the sample in a beaker was irradiated with ultrasonic energy and the viscosity and temperature were measured with a viscometer. For heating treatment, the sample in a beaker was heated and the viscosity and temperature were measured with a viscometer. Kinematic viscosity was calculated by dividing absolute viscosity with density. Results: The kinematic viscosity of waste cooking oil and cooking oil are up to ten times as high as that of light oil at room temperature. However, the difference of two types of oil decreased by four times as the temperature increased over $83^{\circ}C$. When the viscosity by the treatment of ultrasonic energy irradiation was compared to one by the heating treatment to the waste cooking oil, the viscosity by the treatment of ultrasonic energy irradiation was lower by maximum of 22% and minimum of 12%, than one by the heating treatment. Conclusions: Ultrasonic energy irradiation lowered the viscosity more than the heating treatment did, and ultrasonic energy irradiation has an enormous effect on fuel reforming.

• 한국식품과학회지
• /
• 제26권6호
• /
• pp.696-703
• /
• 1994

The purpose of this study was to investigate the gelatinization properties of potato starch heated with microwave. Two types of potato starches were prepared; In group A raw potato starch was heated with microwave and in group B potato starch was isolated from potato heated with microwave. Both groups were exposed to the microwave energy in a 560W, 2,450 MHz oven for 60, 120, 180 and 300 seconds. Gelatinization behaviour by DSC made a few differences according to the ratio of starch to water. As the microwave heating time took longer, gelatinization temperature and gelatinization $enthalpy({\bigtriangleup}H_1)$ were decreased in and melting $enthalpy({\bigtriangleup}H_2)$ was increased in group A. Whereas they were increased in group B. In both groups, maximum viscosity in gelatinization by Brabender amylogram was decreased by microwave heating. Then the peak of the maximum viscosity was shifted to higher temperature and cold viscosity was slightly increased. In group A, viscosity in gelatinization and light transmittance by NaOH was increased in initial stage and gel volume in gelatinization by KSCN was decreased. On the other hand, in group B, viscosity by alkali was slightly decreased, but light transmittance by NaOH was almost never changed. Gel volume is decreased like group A.

• 한국분무공학회지
• /
• 제14권3호
• /
• pp.131-138
• /
• 2009

In the present study, spread-recoil behavior of a drop of shear-thinning liquid (xanthan solution) on a dry wall (polished stainless-steel plate) was examined and compared with that of Newtonian liquid (glycerin solution). Nine different kinds of xanthan and glycerin solutions were tested, including three pairs of xanthan and glycerin solutions, each having the same viscosity in low shear rate region ($10^{-2}-10^0\;l/s$). The drop behavior was visualized and recorded using a CCD camera. The maximum diameter and the spreading velocity of the xanthan drops turned out to be significantly larger and the time to reach their final shape was much shorter compared to the cases with the glycerin solutions, due to the smaller viscous dissipation resulted from lower viscosity in the higher shear rate region (>$10^0\;l/s$). As a result, the maximum diameters were measured to be larger than the predicted values based on the model proposed for Newtonian liquids, and the deviation was more pronounced with the solution with the larger viscosity variation. Consequently, viscosity variation with the shear rate was found to be a dominant factor governing the spread-recoil behavior of shear-thinning drops.

• 한국작물학회지
• /
• 제35권2호
• /
• pp.137-145
• /
• 1990

국내에서 재배되고 있는 벼 6품종을 대상으로 품종별로 8-20 지역에서 1987년과 1988년에 생산된 쌀을 각각 수집하여 그들의 외관, 아밀로스함량 및 알칼리붕괴도, 아밀로그라프에 의한 쌀가루의 호화 및 점성특성과 레오메타를 이용한 밥알의 조직감(Texture)을 조사하고 관능검사법에 의한 식미평가를 실시하여 이들 상호간의 관계를 검토하였다. 1. 동일품종내에서는 재배지역에 따른 심복백미비율의 변이가 백미천립중, 쌀알의 아밀로스 함량과 알칼리붕괴도, 쌀가루의 아밀로그람특성, 밥알의 레오그람특성 및 식미와 각각 독립적으로 나타났다. 2. 재배지역에 따른 변이정도가 컸던 형질들간의 단순상관관계를 보면 아밀로그람특성 중 최고점도와 break down간에 정의 상관, 최고점도와 set back간, 그리고 set back과 break down간에는 부의 상관이 인정되었고 알칼리붕괴도와 break down간, 알칼리붕괴도와 최고점도간에는 정의 상관, 그리고 알칼리붕괴도와 set back간에는 부의 상관이 인정되었다. 3. 아밀로그람특성 중 최고점도와 break down 값이 낮았고 동시에 set back 값은 높았던 3지역 쌀은 최고점도와 break down 값이 높고 set back 값이 낮았던 3지역 쌀에 비하여 알칼리붕괴도는 높고, 레오그람특성 중 식미지수(TPI)와 점성/경도비율(Vi/H)은 낮았으며 관능검사법에 의한 종합식미에서도 낮은 점수를 받았다. 4. 레오메타로 조사한 점성/경도비율과 관능검사로 평가한 종합식미를 품종별 지역평균치보다 상급, 하급 그리고 평균치정도의 3등급으로만 나누어 두 형질간의 간계를 검토한 결과 점성/경도비율이 상급인 쌀은 종합식미가 평균치정도 또는 상급으로 판정받은 경우가 대부분이었다. 레오메타특성 중 식미지수와 종합식미와의 관계도 점성/경도비율에서와 비슷한 경향을 보였다.