• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.134-143
• /
• 2006

Out of all types of motions the critical motions leading to capsize is roll. The dynamic amplification in case of roll motion may be large for ships as roll natural frequency generally falls within the frequency range of wave energy spectrum typical used for estimation of motion spectrum. Roll motion is highly non-linear in nature. Den are various representations of non-linear damping and restoring available in literature. In this paper an uncoupled non-linear roll equations with three representation of damping and cubic restoring term is solved using a perturbation technique. Damping moment representations are linear plus quadratic velocity damping, angle dependant damping and linear plus cubic velocity dependant damping. Numerical value of linear damping coefficient is almost same for all types but non-linear damping is different. Linear and non-linear damping coefficients are obtained form free roll decay tests. External rolling moment is assumed as deterministic with sinusoidal form. Maximum roll amplitude of non-linear roll equation with various representations of damping is calculated using analytical procedure and compared with experimental results, which are obtained form forced tests in regular waves by varying frequency with three wave heights. Experiments indicate influence of non-linearity at resonance frequency. Both experiment and analytical results indicates increase in maximum roll amplitude with wave slope at resonance. Analytical results are compared with experiment results which indicate maximum roll amplitude analytically obtained with angle dependent and cubic velocity damping are equal and difference from experiments with these damping are less compared to non-linear equation with quadratic velocity damping.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• Journal of Oral Medicine and Pain
• /
• 제40권3호
• /
• pp.115-123
• /
• 2015

Purpose: The aim of this study was to elucidate the coordination patterns of the sternocleidomastoid and posterior cervical muscles in response to symmetrical and asymmetrical jaw functions in normal adults. Methods: Twenty-seven healthy volunteers (8 females, 19 males; mean age, $30.4{\pm}2.5$ years) participated in this study. Surface electromyography (EMG) was used to record activities in the masseter, suprahyoid, sternocleidomastoid, and posterior cervical muscles at rest and during maximum tooth clenching, biting of a cotton roll with the anterior teeth, unilateral biting of a cotton roll with the posterior teeth, bilateral biting of cotton rolls with the posterior teeth, and jaw opening while seated. Normalized amplitude, activity indices, and asymmetry indices were compared between the muscles and the jaw tasks. Results: During symmetrical jaw functions (e.g., tooth clenching, biting with the anterior teeth, bilateral biting with the posterior teeth, jaw opening), the sternocleidomastoid and posterior cervical muscles showed elevated EMG amplitudes compared with the resting condition. The co-activation pattern of the sternocleidomastoid muscle was more pronounced than those of the posterior cervical muscles during these tasks. During asymmetrical jaw functions (e.g., unilateral biting with the posterior teeth), the ipsilateral sternocleidomastoid and masseter muscles showed higher contraction activity than did the contralateral muscles, but the contralateral posterior cervical muscles were more active than the ipsilateral muscles. Conclusions: The sternocleidomastoid and posterior cervical muscles were shown to be co-activated and coordinated anteroposteriorly or bilaterally according to symmetrical or asymmetrical jaw function. These results suggest an integrated neural control mechanism for the jaw and neck muscles, and provide further evidence supporting the intimate functional coupling between the trigeminal and cervical neuromuscular systems.

• 해양환경안전학회지
• /
• 제19권2호
• /
• pp.200-206
• /
• 2013

이 연구에서는 상용코드(AQWA)를 이용하여 규칙파 중 8점 계류 중인 플로팅 도크의 계류 장력과 운동응답특성을 고찰하였다. 연구의 목적을 달성하기 위해 수심 10 m 연안환경(파 진폭 1.05 m, 파주기 3.85 sec, 풍속 20.21 m/s, 풍향 및 조류방향 $90^{\circ}$, 입사파 ${\chi}=180^{\circ}$, $135^{\circ}$ 및 $90^{\circ}$ 조건에서 수치 해를 적용하였다. 해석모델은 길이 140 m, 폭 32 m 및 높이 14.6 m의 강구조물로 현수선의 길이는 최대 120 m를 적용하였다. 해석결과 상하동요와 종동요는 선수파 보다 횡파에서 크게 나타났으며 계류 장력도 횡파와 풍하중에 의해 크게 작용하였다.

• Wind and Structures
• /
• 제23권2호
• /
• pp.127-142
• /
• 2016

Aerodynamic effects, such as drag force and flow-induced vibration (FIV), on civil engineering structures can be minimized by optimally modifying the structure shape. This work investigates the turbulent wake of a square prism with its faces modified into a sinusoidal wave along the spanwise direction using three-dimensional large eddy simulation (LES) and particle image velocimetry (PIV) techniques at Reynolds number $Re_{Dm}$ = 16,500-22,000, based on the nominal width ($D_m$) of the prism and free-stream velocity ($U_{\infty}$). Two arrangements are considered: (i) the top and bottom faces of the prism are shaped into the sinusoidal waves (termed as WSP-A), and (ii) the front and rear faces are modified into the sinusoidal waves (WSP-B). The sinusoidal waves have a wavelength of $6D_m$ and an amplitude of $0.15D_m$. It has been found that the wavy faces lead to more three-dimensional free shear layers in the near wake than the flat faces (smooth square prism). As a result, the roll-up of shear layers is postponed. Furthermore, the near-wake vortical structures exhibit dominant periodic variations along the spanwise direction; the minimum (i.e., saddle) and maximum (i.e., node) cross-sections of the modified prisms have narrow and wide wakes, respectively. The wake recirculation bubble of the modified prism is wider and longer, compared with its smooth counterpart, thus resulting in a significant drag reduction and fluctuating lift suppression (up to 8.7% and 78.2%, respectively, for the case of WSP-A). Multiple dominant frequencies of vortex shedding, which are distinct from that of the smooth prism, are detected in the near wake of the wavy prisms. The present study may shed light on the understanding of the underlying physical mechanisms of FIV control, in terms of passive modification of the bluff-body shape.