• 전기의세계
• /
• 제19권4호
• /
• pp.12-17
• /
• 1970

BaO.nFe$_{2}$O$_{3}$ Powder ferrite magnet was made by sintering process. The purity of the powder were 99.6% far BaO. 99.5% for Fe$_{2}$O$_{3}$, and the grain size 1-3 micron. The Optimum mixing ratio n=4.4 the optimum density 4.8gr/cm$^{3}$ and the optimum second sintering temperature 1260.deg. C was found. The theoretical bloch wall, dimension of domain and energy per unit volume of BaFe$_{12}$O$_{19}$ were compared with pure Fe. Also, the saturation magnetization and maximum energy product were computed.d.d.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.59-65
• /
• 2012

Torque Generator is a product which has function to transform hydraulic energy to mechanical energy of torque and rotating speed, and be used for direction change device of agricultural machines. This study proposes failure analysis and test analysis on torque generator and introduces a process that reliability of a product is enhanced by design improvement. And also it presents improvements of maximum output torque by modifying design and surface treatment. Lastly it verifies reliability improvement by analyzing test results of before and after life test.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.341-348
• /
• 1995

An analysis of the use of temperature profiles in the determination of the kinetic parameters of combustion synthesis of Ti5Si3 were investigated. From profile analysis, an apparent activation energy of 12KJ/mol was calculated. The Maximum heating rate achieved during 10wt% Ti5Si3 reaction by the product dilution method was approximately $1.5\times$104 K/s. Coupling this value with the measured wave velocity of 7.02 cm/s yields a maximum thermal gradient of 2.14$\times$103 K/cm. The value of tr (=t*) was calculated to be 1.2$\times$10-1 s and the value of td (=tx) was calculated to be 32.89 s. Using the definition of t* and the measured wave velocity, the effective thermal diffusivity, $\alpha$, was calculated to be 0.59$\times$10 $\textrm{cm}^2$/s. From these analysis, the power function, G, was also calculated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1464-1468
• /
• 1997

We propose a decentralized state estimation method in the multisensor state estimation problem. The proposed method bounds teh maximum energy gain from uknown external disturbances to the estimation errors in the suboptimal case. And we formulate aternative H/sip .inf./ filter gain equatiions with teh idea that the suboptimal H.$^{\infty}$ filter is the special form of Kalman filter filter whose state equations are defined in indefinite inner product spaces. Using alternative filter gain equations we design the decentralized $H^{\infty}$ state estimator which is composed of local filters and central fusion filter that are suboptimal in the $H^{\infty}$ sense. In addition, the proposed update equations between global and local data can reduce unnecessary calculation burden efficently.y.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.383-386
• /
• 2008

The four-bed PSA process using a layered bed of activated carbon and zeolite 5A was studied to produce a high purity hydrogen product from SMR off-gas. At a desired product purity (99.999%+), the recovery increased with decreasing the linear velocity. However, the difference of the increasing of the recovery became smaller with the decreasing of the linear velocity and then was similar from below the linear velocity 3.9 cm/s. When the adsorbents, the feed gas composition, and the operating conditions are given, the residence time is mainly a function for design of the PSA bed size. The minimum residence time exists to obtain the maximum recovery at desired product purity.

• Corrosion Science and Technology
• /
• 제21권3호
• /
• pp.184-199
• /
• 2022

Steel was exposed in an atmospheric environment, and atmospheric environmental factors that include chloride, humidity, SO₂, NO₂ etc. induced the corrosion of steel. Corrosivity categories classified by SO₂ and chloride deposition rate were low, but those classified by TOW were high in the Korean Peninsula, and on these environmental categories, the corrosivity of atmospheres classified by corrosion rate in carbon steel was low medium, C2-C3, and medium, C3 for zinc, copper, and aluminum. This work performed the outdoor exposure test for 10 years at 14 areas in Korea and calculated the atmospheric corrosion rate of carbon steel. The atmospheric corrosion behavior of carbon steel is discussed based on the various corrosion factors. When the corrosion product forms on carbon steel by atmospheric corrosion, cracks may also be formed, and through these cracks, the environmental factors can penetrate into the interior of the product, detach some of the corrosion products and finally corrode locally. Thus, the maximum corrosion rate was about 7.3 times greater than the average corrosion rate. The color difference and glossiness of carbon steel by the 10 year-outdoor exposure tests are discussed based on the corrosion rate and the environmental factors.

• 한국토양비료학회지
• /
• 제44권3호
• /
• pp.337-343
• /
• 2011

A particular empirical equation for rainfall kinetic energy is needed to compute rainfall erosivity, calculated by the annual sum of the product of total rainfall energy and maximum 30-min rainfall intensity. If rainfall kinetic energy equation was different, rainfall erosivity will be produced differently. However, the previous studies in Korea had little concern about rainfall kinetic energy equation and it was not clear which rainfall kinetic energy is suitable for Korea. The purpose of this study is to analyze and evaluate the difference of the rainfall erosivity based on different rainfall kinetic energy equations obtained from previous studies. This study introduced new rainfall erosivity factors based on rainfall kinetic energy equation of Noe and Kwon (1984) that is only regression model developed in Korea. Data of annual rainfall erosivity for 21 weather stations in 1980~1999 were used in this study. The result showed that rainfall erosivity factors by the previous equations had been about 10~20% overestimated than rainfall erosivity by Noe and Kwon (1984)'s equation in Korea.

• 한국음향학회지
• /
• 제41권5호
• /
• pp.570-588
• /
• 2022

식약처에서 허가된 국내 11개 및 국외 6개 제조사의 46개 탄도형 체외 충격파 치료기 중 기술 문서가 공개된 15개 제품 70개의 충격파 발생 장치에 대해 충격파 음향 출력을 조사했다. 조사 결과, 임상에서 가장 보편적인 피폭 변수로 사용되는 에너지 속 밀도(Energy Flux Density, EFD)는 치료기의 충격파 발생 장치에 따라 최소 출력 설정에서 최대 563.64배, 최대 출력 설정에서 최대 74.62배까지 차이가 나고 있다. 동일 모델 제품에서 충격파 변환자의 선택으로 EFD의 값은 최소 설정에서 최대 81.82배, 최대 설정에서 최대 46.15배 차이를 보이고 있다. 최대 출력 설정에서 EFD의 최저값 0.013 mJ/mm²이 최소 출력 설정에서 EFD의 최대값 0.62 mJ/mm²보다 훨씬 낮은 것(2.1 %)으로 나타났다. 동일한 적응증으로 허가 받은 탄도형 체외 충격파 치료기의 음향 출력이 수십~수백 배 차이가 난다는 것은 치료기의 치료 효과 및 안전성을 보증하기 어렵다는 것을 시사한다. 본 연구의 결과는 치료기의 허가 및 성능의 동등성에 대한 명확한 기준을 포함하는 식약처의 가이드라인 개정 및 사용 중인 치료기의 음향 출력과 기술 문서와의 일치성 확인을 포함하는 치료기의 성능에 대한 규제 기관의 사후 관리의 필요성을 제기한다.

• 방사성폐기물학회지
• /
• 제18권2호
• /
• pp.207-215
• /
• 2020

희토류(Rare Earth) 함량이 높은 TRU 생성물 중의 RE 원소를 감소시키기 위하여 RE 원소와 UCl₃의 산화반응을 이용한 RE 제거 공정의 타당성을 HSC Chemistry 코드를 이용하여 검토하였다. 사용후핵연료에 포함된 TRU 원소 및 RE 원소의 조성 및 열역학적 자료를 검토하였으며, UCl₃와의 산화 반응에 따른 평형 자료를 계산하여 공정 가능성을 검토하였다. 실제 파이로 프로세싱 처리를 가정한 물질수지로부터 TRU 생성물의 RE 함량이 다른 두 가지 경우에 대하여 RE 원소 제거율과 TRU 회수율을 평가하였다. TRU 생성물을 산화제인 UCl₃와 반응시켰을 때 각 원소의 Gibbs free energy의 차이에 의한 선택적 산화 반응이 일어났다. 투입된 UCl₃ 양을 조절하여 TRU 회수율을 최대로 유지하면서도 RE 원소를 제거하여 최종생성물의 TRU/RE 비를 증가시킬 수 있는 가능성을 계산 결과로 확인하였다. 본 연구의 결과들은 열역학적 평형 자료에 기반한 결과이므로 실제 공정에 적용하기에는 많은 차이점이 존재한다. 그러나 TRU 물질을 취급하기 어려운 환경에서 파이로프로세싱의 TRU 생성물을 고속로의 핵연료로 공급하기 위한 공정 설계에 중요한 자료로 활용될 것으로 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1527-1533
• /
• 2011

The reaction of gas-phase atomic hydrogen with oxygen atoms chemisorbed on a silicon surface is studied by use of the classical trajectory approach. We have calculated the probability of the OH formation and energy deposit of the reaction exothermicity in the newly formed OH in the gas-surface reaction H(g) + O(ad)/Si${\rightarrow}$ OH(g) + Si. All reactive events occur in a single impact collision on a subpicosecond scale, following the Eley-Rideal mechanism. These events occur in a localized region around the adatom site on the surface. The reaction probability is dependent upon the gas temperature and shows the maximum near 1000 K, but it is essentially independent of the surface temperature. The reaction probability is also independent upon the initial excitation of the O-Si vibration. The reaction energy available for the product state is carried away by the desorbing OH in its translational and vibrational motions. When the initial excitation of the O-Si vibration increases, translational and vibrational energies of OH rise accordingly, while the energy shared by rotational motion varies only slightly. Flow of energy between the reaction zone and the solid has been incorporated in trajectory calculations, but the amount of energy propagated into the solid is only a few percent of the available energy released in the OH formation.