• Korean Journal of Clinical Pharmacy
• /
• v.19 no.1
• /
• pp.23-31
• /
• 2009

The aim of this study was to evaluate the pharmacokinetic parameters of two risedronate preparations. The clinical assessment was conducted on 46 healthy volunteers who received one tablet (Risedronate sodium 35 mg/tablet) in the fasting state, in a randomized balanced $2{\times}2$ cross-over study design. After dosing of one tablet containing 35 mg risedronate sodium, blood samples were collected serially for a period of 48 hours. Plasma was analyzed for risedronate by using LC/MS/MS assay method. The analysis system was validated in specificity, accuracy, precision, and linearity. $AUC_t$, (the area under the plasma concentration-time curve from the zero-time to 48 hr) was calculated through the trapezoidal rule. $C_{max}$ (maximum plasma drug concentration) were compiled from the plasma risedronate concentration-time data of each volunteer. No significant sequence effect was found for the pharmacokinetic parameters indicating that the cross-over design was properly performed. The 90 % - Confidence intervals of the $AUC_t$ ratio and the $C_{max}$ were from log 0.8752 to log 1.1888 and log 0.8457 to log 1.1478, respectively. These values were within the acceptable intervals between 0.80 and 1.25. Therefore, this study demonstrated that no statistically significant difference was identified with respect to the rate and extent of absorption.

• The Korean Journal of Ecology
• /
• v.5 no.4
• /
• pp.204-210
• /
• 1982

Comparative study of the biomass productioin and the cyclings of nitrogen, phosphorus and potassium was carried out on the east and the northwest facing slope in the montane grassland of Mt. Soback. The maximum productin during the growing season in the east and the northwest slope were 1, 150g/m2.yr, and 755g/m2.yr. in the August, respectively. The positive correlation was appearent between biomass production and A-layer depth of the soil and the correlation coefficient (r=.964) was very significant at 1% level. In the above ground materials, the nutrients contents were high at the early of the growing season but decreased gradually. In roots, however, there are no significant trend throughout the growing season. Total amounts of minerals uptaken by plants during the growing season in the east and the northwest site were 18.20 and 10.66g/m2.yr for N, 0.06 and 0.03g/m2.yr for P, 0.23 and 0.11g/m2.yr for K, respectively. the minerals returned to the soil by litter decomposition and roots decay in the east and the northwest site were 16.19 and 9.62g/m2.yr for N, 0.046 and 0.021g/m2.yr for P, 0.211 and 0.099g/m2.yr for K, respectively. The turnover the rate (absorbed/returned) of the nutrients in the east and the northwest site were 1.13 and 1.14 for N, 1.30 and 1.43 for P, 1.09 and 1.11 for K, and the absorption rates of minerals were 0.39 and 0.29% for N, 3.16 and 1.88% for P, 0.91 and 0.57% for K, respectively.

• KSBB Journal
• /
• v.26 no.5
• /
• pp.471-476
• /
• 2011

Nowadays biodiesel (fatty acid methyl ester, FAME) has been becoming an important issue as a desired alternative of energy products because of non-toxic, biodegradable properties, and lower exhaust emissions. During esterification of fatty acids or transesterification of oils and fats with short chain alcohols by the alkali-catalyzed methanolysis, FAME and unrefined glycerol are generated. Quantification of glycerol as a by-product is important because of a determinant of biodiesel quality. However, the glycerol analysis by gas chromatography (GC) method has laborious works with sample preparation, long time and cost of sample analysis. Thus, there is a need to analyze glycerol more simply. Herein we demonstrate that the colorimetric assay for glycerol analysis conducted by UV-vis spectrophotometer at the wavelength 617 nm whose peak is maximum intensity of malachite green, resulting in the red-shift occurred proportionally as a function of glycerol amount. Thus, it is considered the solvent media for malachite green fading for biodiesel production: (1) water, (2) MeOH, and (3) EtOH. The resulting findings show that the peak intensity at 617 nm in glycerol-malachite green mixture had a relationship between glycerol concentration and degree of peak shift as increase in pure glycerol concentration approximately at pH 7.0. However, when it was measured the unrefined glycerol concentration by diluting and adjusting with water to buffer (pH 7.0), it was not observed the absorption peak at 617 nm because of impurities and OH ions. In case of glycerol from biodiesel production factories, glycerol concentration could be successfully measured.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.1
• /
• pp.31-37
• /
• 1987

A study has been conducted to investigate the behavior of carbofuran in a miniature paddy agrosystem simulated for paddy field. Carbofuran applied onto the paddy water was rapidly absorbed and translocated into rice plants. Carbofuran concentration in rice plant reached its maximum level between 1 to 3 days after treatment and gradually decreased thereafter. Half life of carbofuran concentration in paddy water was 4 days in both application rates of 0.12 and 0.24Kg a.i./10a. Carbofuran residue in paddy soil was gradually dissipated with the half life of 8 and 12 days in 0.12 and 0.24㎏ a.i./l0a respectively. Range of carbofuran residue in brown rice and rice straw harvested from the paddy agrosystem was 0.01∼0.02 ppm and 0.37∼0.57 ppm irrespective of the two application rates respectively.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.4
• /
• pp.311-317
• /
• 2004

A bioequivalence study of $Gomcillin^{TM}$ capsules (DAEWOONG Pharmaceutical Co., Korea) to $Famoxin^{TM}$ capsules (Dong Wha Pharm. Ind. Co., Korea) was conducted according to the guideline of Korea Food and Drug Administration (KFDA). Twenty four healthy male Korean volunteers received each medicine at the amoxicillin dose of 500 mg in a $2{\times}2$ crossover study. There was a one-week wash out period between the doses. Plasma concentrations of amoxicillin were monitored by a high-performance liquid chromatography for over a period of 8 hours after the administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 8 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for $Gomcillin^{TM}/Famoxin^{TM}$ were $log0.91\;{\sim}\;log1.03$ and $;log0.93\;{\sim}\;log1.10$, respectively. These values were within the acceptable bioequivalence intervals of $log0.80\;{\sim}\;log1.25$. Thus, our study demonstrated the bioequivalence of $Gomcillin^{TM}$ and $Famoxin^{TM}$ with respect to the rate and extent of absorption.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.12
• /
• pp.1477-1485
• /
• 2011

Dyeability and colorfastness of the blended knits of cotton/rayon (40/60; C/R) and wool/tencel (10/90; W/T) are examined using the natural dyestuff ($Pinux^{TM}$) manufactured from Pinus radiata pine bark extract. In addition, pre-treatments (such as bleaching, mercerization and cationization) are performed to improve dyeability and colorfastness. The $Pinux^{TM}$ powder dyestuffs produced by Pinux Co., Ltd. are used as dyestuffs and their properties are examined for dyeing concentration (0.5-2% (owb)), dyeing time (30-120 minutes) and dyeing temperature (30-$90^{\circ}C$). Dyeability is evaluated with K/S value at 400nm, which is the maximum absorption wavelength for $Pinux^{TM}$. The results show the dyeability of W/T sample containing protein fiber with $Pinux^{TM}$ is superior to all cellulose fiber C/R. A concentration of dyestuff greater than 1.5% (owb), dyeing time 120 minutes and dyeing temperature of $90^{\circ}C$ are the most optimized conditions. It shows that the dyeability of C/R and W/T samples are high in the condition of an acid-dyeing bath and that dyeability highly declined in alkaline bath due to the instability of the proanthocyanidin pigment. After analyzing the effect of bleaching, mercerizing and cationizing (as pre-treatments on dyeability) it was concluded that the dyeability of the C/R sample was enhanced by mercerization but no significant effect by cationization. However, the simultaneous treatment of cationizing and dyeing resulted in far improved dyeability compared to dyeing after cationizing pre-treatment. As for the W/T sample, the effect of cationization was more prominent than the C/R sample. Colorfastness to color changes in the control W/T sample was higher than that of C/R's level 1-2, and it increased to Level 2 when bleaching pre-treatment was given and when a simultaneous cationizing treatment was adopted to the dyeing process. Colorfastness to light in W/T control sample resulted in Level 3 and further increased to an excellent Level of 4 with bleaching and simultaneous cationizing during dyeing process.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.2
• /
• pp.66-73
• /
• 2017

This study was to evaluate the influential parameters such as intial Cs concentration, reaction temperature, contact time and pH variation of solution on Cs adsorption. Using the experimental data, adsorption kinetics, isotherms and thermodynamic properties were analyzed. The Cs ion adsorption of the zeolite X was effective in the range from pH 5 to 10 and reached equilibrium after 60 minutes. The adsorption kinetics and isotherms of Cs ion with the zeolite X was described well by the pseudo-second-order kinetic and Langmuir isotherm model. The maximum adsorption capacities of Cs ion calculated from Langmuir isotherm model at 293~333 K were from 303.03 mg/g to 333.33 mg/g. It was found that thermodynamic property of Cs ion absorption on the zeolite X was spontaneous and endothermic reaction. The experimental data were fitted a second-order polynomial equation by the multiple regression analysis. The values of the dependent variable calculated by this best fitted model equation were in very good agreement with the experimentally obtained values.

• Applied Biological Chemistry
• /
• v.28 no.4
• /
• pp.278-283
• /
• 1985

These studies were conducted to investigate the changes and relation in protein, rheology and bread-mating properties during hard and soft wheat maturation. Samples were collected from the fields at 25 to 50 days after heading at intervals of 5 days. Protein content, sedimentation value and Pelshenke value of the tested wheat kernel or flour differed significantly between hard and soft wheat, and was relatively constant at 35 to 40 days after heading in each cultivar. In Mixogram water absorption of the flour, soft wheat increased only slightly, while intermediate and hard wheat increased remarkedly with maturation of the kernel. Total Mixogram characteristics increased and reached its maximum level at 35 days after heading. Farinogram pattern and bread loaf volume of the flour was greatly differences at the early stages of development due to cultivar, and was relatively constant at 40 days after heading. Significant positive and negative correlations were obtained among the protein and rheological properties, and tread loaf volume as the kernel matured.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.147-158
• /
• 2011

The purpose of this research was to analyze the connections of the seismic-performance values for domestic-performance-based designs. Basic research on the performance design method has been increasing of late, along with performance-based organization investigations. These investigations concern the performance level state of steel structure buildings. According to the performance limit state, seismic-performance values should be presented as appropriate steel structure engineering amounts. The first step, based on the full-scale steel structure experiments, involves researching on the making of a basic document. The moment-rotation angle relationship results of the experiment on the moment-frame connection were used to assort the functional and undamaged limits, which were assumed to be less than the yield moment. Moreover, the repairable and safety limits, which were assumed to exist between the yield and maximum moments, were assorted by investigating the accumulated plastic deformation ratio.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.736-743
• /
• 2013

Novel carbazole based copolymers were synthesized by Suzuki coupling polymerization. (Diphenylene)vinylene and n-octyl was introduced to carbazole as pendants for reducing band gap and improving solubility, respectively. Thermal, photoluminescence and electro-luminescence of copolymers were studied for applying the emitting layer of polymer light emitting diode (PLED). Maximum UV-vis absorption and photoluminescence (PL) emission wavelength of copolymers showed 333~340 nm and 409~464 nm in solution state, respectively. The relative quantum yield using 9,10-diphenylanthracene as a reference was 25.8%. These copolymers exhibited high thermal stability ($T_d$ = $350^{\circ}C$) and good film forming ability. Good luminance was obtained at voltages lower than 8 V and the onset voltage was observed at 4.0 V.