• 제목/요약/키워드: maximum absorption

검색결과 1,128건 처리시간 0.028초

Optimization and investigations of low-velocity bending impact of thin-walled beams

  • Hossein Taghipoor;Mahdi Sefidi
    • Steel and Composite Structures
    • /
    • 제50권2호
    • /
    • pp.159-181
    • /
    • 2024
  • In the present study, the effect of geometrical parameters of two different types of aluminum thin-walled structures on energy absorption under three-bending impact loading has been investigated experimentally and numerically. To evaluate the effect of parameters on the specific energy absorption (SEA), initial peak crushing force (IPCF), and the maximum crushing distance (δ), a design of experiment technique (DOE) with response surface method (RSM) was applied. Four different thin-walled structures have been tested under the low-velocity impact, and then they have simulated by ABAQUS software. An acceptable consistency between the numerical and experimental results was obtained. In this study, statistical analysis has been performed on various parameters of three different types of tubes. In the first and the second statistical analysis, the dimensional parameters of the cross-section, the number of holes, and the dimensional parameter of holes were considered as the design variables. The diameter reduction rate and the number of sections with different diameters are related to the third statistical analysis. All design points of the statistical method have been simulated by the finite element package, ABAQUS/Explicit. The final result shows that the height and thickness of tubes were more effective than other geometrical parameters, and despite the fact that the deformations of the cylindrical tubes were around forty percent greater than the rectangular tubes, the top desirability was relevant to the cylindrical tubes with reduced cross-sections.

전토양(田土壤) 인산(燐酸)의 흡수계수(吸收係數)와 Langmuir 최대흡착량(最大吸着量)과의 비교연구(比較硏究) (Comparison between phosphorus absorption coefficient and Langmuir adsorption maximum)

  • 류인수
    • 한국토양비료학회지
    • /
    • 제8권1호
    • /
    • pp.1-17
    • /
    • 1975
  • 야산(野山)의 신개간지토양(新開墾地土壤)과 화산회토양(火山灰土壤)에 있어 특(特)히 문제(問題)가 되는 인산(燐酸)의 시비량(施肥量) 결정(決定)의 한 기준(基準)인 인산흡착력(燐酸吸着力)의 측정방법(測定方法)을 검토(檢討)할 목적(目的)으로 화산회토양(火山灰土壤)과 광질토양(鑛質土壤)(미경지(未耕地)및 기경지토양(旣耕地土壤))에 대(對)하여 인산흡착(燐酸吸着)에 관(關)한 시험(試驗)을 행(行)하였는바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. Langmuir 흡착식(吸着式)을 이용(利用)하여 구(求)한 인산(燐酸)의 최대흡착량(最大吸着量)은 기경지토양(旣耕地土壤)6.2~32.9, 미경지토양(未耕地土壤) 74.1~90.4, 화산회토양(火山灰土壤) 720~915mg.p/100g 이였다. 2. 인산흡수계수(燐酸吸收係數)는 기경지토양(旣耕地土壤)에서 116~179, 미경지토양(未耕地土壤)에서 161~259, 화산회토양(火山灰土壤)에서 1,098~1,205mg.p/l이며, 인산흡수계수(燐酸吸收係數)/Langmuir 최대흡착량(最大吸着量)의 비(比)는 인산흡착력(燐酸吸着力)이 큰 화산회토양(火山灰土壤)에서 적고 (1.3~1.5) 인산흡착력(燐酸吸着力)이 낮은 토양(土壤)일수록 컷다. (2.2~18.7) 3. 인산흡수계수(燐酸吸收係數)의 측정(測定)은 고농도(高濃度)의 인산용액(燐酸溶液)에서 행(行)하여 지므로 이로서는 석회(石灰) 또는 인산시용(燐酸施用)에 의(依)한 흡착량(吸着量)의 변동(變動)을 명확(明確)히 추정(推定)하기 어려우나, 저농도(低濃度)에서 측정(測定)한 농도별(濃度別) 인산흡착량(燐酸吸着量)및 Langmuir 흡착식(吸着式)을 이용(利用)하여 구(求)한 최대흡착량(最大吸着量)으로서는 흡착량(吸着量)의 변동추정(變動推定)을 분명(分明)히 할수 있었다. 4. 치환성(置換性) 알루미늄을 중화(中和)하기 위한 당량(當量)의 수산화(水酸化)칼슘을 가(加)하여 포장용수량(圃場容水量)에서 40일간(日間) 항온($25{\sim}30^{\circ}C$) 처리(處理)하므로서 치환성(置換性) 알루미늄 함량(含量)이 높은 광질토양(鑛質土壤)에서는 Langmuir 최대흡착량(最大吸着量)이 유의(有意)한 감소(減少)를 보였다. 5. 인산(燐酸)을 처리(處理)하여 50일간(日間) 포장용수량(圃場容水量) 상태에서 항온($25{\sim}30^{\circ}C$) 처리(處理)한 토양(土壤)에 대(對)하여 Langmuir 최대흡착량(最大吸着量)을 측정(測定)한바 최대흡착량(最大吸着量)에 상당(相當)하는 인산(燐酸)의 시용(施用)으로 화산회토양(火山灰土壤)은 25.5 미경지토양(未耕地土壤)은 54.4%, 기경지토양(旣耕地土壤)은 76.2%의 포화율(飽和率)을 나타내었다. 6. 토양(土壤)의 인산흡착량(燐酸吸着量)은 첨가인산(添加燐酸)의 농도(濃度)가 높아짐에 따라 곡선적(曲線的)으로 증가(增加)하여 어느 일정농도(一定濃度)에 이르면 흡착포화점(吸着飽和點)에 달(達)하며 광질토양(鑛質土壤)에서는 100mg.p/l, 화산회토양(火山灰土壤)에서는 1,000mg.p/l의 인산용액(燐酸溶液)으로 측정(測定)되는 인산흡착량(燐酸吸着量)은 Langmuir 최대흡착량(最大吸着量)에 매우 근사(近似)한 값을 나타내므로 이를 토양(土壤)의 인산흡착력(燐酸吸着力)을 나타내는 새로운 지표(指標)로 삼고 포화흡착량(飽和吸着量)이라 정의(定義)하였다. 7. 단일농도(單一濃度)에서 이루어지는 포화흡착량(飽和吸着量)의 측정(測定)으로 여러 농도(濃度)에서 인산(燐酸)의 흡착량(吸着量)을 구(求)하여야 하는 Langmuir 최대흡착량(最大吸着量) 측정(測定)의 번잡성(煩雜性)을 피(避)할 수 있어 이 방법(方法)은 실용적(實用的)인 방법(方法)으로 판단(判斷)되었다.

  • PDF

Supramolecular Micelle from Amphiphilic Mn(III)-porphyrin Derivatives as a Potential MRI Contrast Agent

  • Choi, Kwang-Mo;Lee, Do-Hyung;Jang, Woo-Dong
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권3호
    • /
    • pp.639-644
    • /
    • 2010
  • Amphiphilic porphyrin derivatives have been synthesized and characterized by $^1H$ NMR and MALDI-TOF-MS. All porphyrin derivatives showed very high solubility to aqueous medium as well as hydrophobic organic solvent. The UV-vis absorption of the porphyrin derivatives showed significant broadness and decrease of maximum intensity of absorption in aqueous solution. SEM experiment showed the formation of spherical micellar structure. The $T_1$ relaxation time of aqueous medium was drastically decreased in the presence of Mn(III)-porphyrin derivative, indicating that the supramolecular micelle has strong possibility to use as a $T_1$ contrast agent.

고분자에말죤의 첨가에 따른 시멘트모르터의 특성에 관한 연구 -Polyacrylicacid Ester 및 Polystyrene 에말죤의 첨가영향- (The Study on the Properties of Polymer Emulson Modified Mortar -Effects of Polyacrylicacid Ester and Polystyrene Modified Mortar-)

  • 김창은;최강순
    • 한국세라믹학회지
    • /
    • 제12권4호
    • /
    • pp.9-18
    • /
    • 1975
  • Polymer emulsion was used as the admixture for the purpose of increasing the mechanical properties of cement mortar. The effect of polymer emulsion admixture on compressive strength and tensile strength and chemical resistance, relative humidity on compressive and tensile strength, sand particles on water absorption were studied. The results were as follows. 1. Polymer emulson modified mortar cured under 95% of realative humidity showed lower strength than the mortar cured at dry condition. 2. The maximum strength was attained at 10~20% of polystyrene and polyacrylic acid ester polymer-cement mortar. 3. The modified mortar (sand size rate (-9+35)mech:(-35+60)mech=4 : 1) was 1.5 times lower than the modified mortar (1 : 1) in water absorption. 4. Compared with the ordinary mortar, the modified mortar showed 2~3 times greater chemical resistance for 5% HCl or 5% H2SO4.

  • PDF

전기분해 방식에 의한 혼합산화제 소독 특성 평가 (Evaluation of Disinfection Characteristics for Mixed Oxidants Produced by Electro-chemical Method)

  • 이경혁;임재림;이두진;김성수;안효원
    • 상하수도학회지
    • /
    • 제19권5호
    • /
    • pp.625-631
    • /
    • 2005
  • Disinfection characteristics of mixed oxidants produced by mean of electro-chemical method were evaluated. Inactivation rate of B. subtilis spore on the mixed oxidants were similar with that of chlorine. Based on the experimental results, activation energy of mixed oxidants and chlorine with B. subtilis spore at pH 8.3 were calculated as 30.8, $34.7kJ{\cdot}mol^{-1}$ respectively. UV absorption spectrum of both chlorine and mixed oxidants present similar. Molar extinction coefficients of chlorine and mixed oxidants at 292nm, which is maximum absorption wavelength of $OCl^-$ were 357, $377M^{-1}cm^{-1}$, respectively. Disinfectant decay rate and formation rate of THM in the S WTP filtrate also shows insignificant difference for both mixed oxidants and chlorine. In consequent, it was confirmed that high portion of chlorine presents in the mixed oxidants.

버어리종 담배의 염소에 관한 연구 V. 질소질 비료의 형태가 담배의 염소흡수에 미치는 영향 (STUDIES ON THE CHLORINE OF BURLEY TOBACCO PLANTS. V. THE EFFECT OF NITROGEN FERTILIZER TYPE ON THE CHLORINE ABSORPTION BY TOBACCO PLANTS.)

  • 김상범;배길관
    • 한국연초학회지
    • /
    • 제10권1호
    • /
    • pp.3-9
    • /
    • 1988
  • Effect of several nitrogen fertilizer sources on the chlorine absorption by the burley tobacco plants was investigated under the field and pot condition. The nitrogen sources included compound fertilize.(containing 3.9% NH4-N and 6.1% NH2-N), (NH4)2SO4, NaNO3. (NH2)2CO and NH4NO3. The chlorine content of leaf during growing stage was high in (NH4)2SO4 plot , and the differences among nitrogen sources was remarkable at maximum growing stage. The chlorine content of cured leaf was high in (NH4)2SO4 plot. When the (NH4)2SO4 was applied, the total alkaloid content of cured leaf was increased and the color of cured leaf became undesirable with the increment of leaf chlorine. The yield, quality and value of cured leaf were high in NaNO3 plot , while low in (NH4)2SO4 plot.

  • PDF

라우릴황산나트륨과의 Roll 혼합에 의한 메페남산의 용출성 개선 (Improvement of Dissolution Rate of Mefenamic Acid by Roll Mixing with Sodium Lauryl Sulfate)

  • 박성연;서성훈
    • Journal of Pharmaceutical Investigation
    • /
    • 제22권4호
    • /
    • pp.307-315
    • /
    • 1992
  • Dissolution rate of practically insoluble mefenamic acid was improved by roll mixing with sodium lauryl sulfate (SLS) or polyvinylpyrrolidone (PVP). The dissolution rate of the drug roll mixtures with SLS was superior to that of roll mixtures with PVP. The maximal dissolution rate was found in the roll mixtures system with SLS content of 60%. The dissolution rate of mefenamic acid roll mixtures with SLS content of 60% reached to the maximum value after 10 min of roll mixing. The transport of roll mixtures with SLS across rat jejunum was studied by the perfusion method using everted rat jejunum in vitro. The absorption rate of roll mixtures was superior to that of mefanamic acid.

  • PDF

Effect of Ethanolamine Salts and Enhancers on the Percutaneous Absorption of Meloxicam from a Pressure Sensitive Adhesive Matrix

  • Ki, Han-Moe;Cheong, Hyun-Ah;Choi, Hoo-Kyun
    • Journal of Pharmaceutical Investigation
    • /
    • 제37권3호
    • /
    • pp.173-177
    • /
    • 2007
  • The purpose of this study was to investigate the effect of salt formation on the percutaneous absorption of meloxicam through hairless mouse skin from a pressure sensitive adhesive (PSA) matrix. In addition, the influences of enhancers on the permeation of meloxicam or meloxicam-ethanolamine (MX-EA) salts across the hairless mouse skin were evaluated using a flow-through diffusion cell system. The salt formation of meloxicam resulted in lower permeation rate than the parent drug. $Span^{(R)}$ 80 provided the highest enhancing effect for meloxicam and meloxicam monoethanolamine salt. The maximum amount of the drug that can be loaded without retarding permeation rate was different depending on the compound. No relationship was found between the fluxes of meloxicam or MX-EA salts from saturated solutions and those from PSA matrices containing the same enhancer.

Liposome-Insulin의 토끼직장투여(直腸投與)에 있어서 혈당치(血糖値)의 변화(變化) (Change in Blood Glucose Value of Rectal Administration of Liposome-Insulin to Rabbits)

  • 김성호;최준식;백채선
    • Journal of Pharmaceutical Investigation
    • /
    • 제12권3호
    • /
    • pp.88-92
    • /
    • 1982
  • Insulin administration rectally with the liposome has the hypoglycemic effect in the rabbits. The reducton in blood sugar was maximum at about 60 minutes after administration and continued for 4 hrs. at low level in these experiments. No hypoglycemic effect was observed in control administrated rectally without liposome. Rectal absorption of insulin has been effected by addition of the bile salt, as the protective agent which prevented denaturation and the phastransition of insulin in liposome-encapsulation. As a matter of the fact, a significant hypoglycemic action was obtained when the insulin-liposome was given by rectal administration. The use of this agent to enhance insulin absorption offers the possibility of a new approach to rectal insulin therapy.

  • PDF

External Optical Modulator Using a Low-cost Fabry-Perot LD for Multicasting in a WDM-PON

  • Lee, Hyuek-Jae
    • Journal of the Optical Society of Korea
    • /
    • 제15권3호
    • /
    • pp.227-231
    • /
    • 2011
  • An external optical modulation using absorption s in a Fabry-Perot laser diode (FP-LD), has been proposed and experimentally demonstrated for multicasting in a WDM-PON. The center wavelengths of absorption s in an FP-LD move to short-wavelength rapidly by only a small current (~1 mA) injection. If the current injection is stopped, the s move back to the original position. Such a movement of the s can make the FP-LD act as an external optical modulator, which is found to modulate at a maximum modulation speed of 800 Mbps or more. For a multicasting transmitter in a WDM-PON, the proposed modulator can be cost-effectively applied to a multi-wavelength laser source with the same periodicity of the longitudinal mode. Instead of the multi-wavelength laser source, tunable-LDs are used for experiments. The 32 channel multicasting system with the proposed modulator has been demonstrated, showing power penalties of 1.53~4.15 dB at a bit error rate of $10^{-9}$ with extinction ratios better than 14.5 dB at 622 Mbps.