• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.507-508
• /
• 2007

Temperature-dependent current-voltage characteristics of Organic Light-Emitting Diodes(OLEDs) were studied. The OLEDs were based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-diphenyl-4,4'-diamine (TPD) as a hole transport and tris(8-hydroxyquinoline) aluminum($Alq_3$) as an electron transport and emissive material. The current-voltage characteristics were measured in the temperature range of 10[K] and 300[K]. A conduction mechanism in OLEDs was interpreted in terms of tunneling and trap-filled limited current.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.533-534
• /
• 2005

Temperature-dependent current-voltage characteristics of organic light-emitting diodes(OLEDs) were studied in a device structure of ITO/TPD/$Alq_3$/Al. The OLEDs were based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-l,1'-diphenyl-4,4'-diamine(TPD) as a hole transport and tris(8-hydroxyquinoline) aluminum($Alq_3$) as an electron transport and emissive material. The current-voltage characteristics were measured in the temperature range of 10K and 300K. We analyzed an electrical conduction mechanism of the OLEDs using space-charge-limited current(SCLC) and Fowler-Nordheim tunneling.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.773-776
• /
• 2005

In the fabrication of high performance Blue organic light emitting diode, 2-TNATA[4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as hole injection material and NPB[N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as hole transport material were deposited on the ITO (Indium Tin Oxide)/Glass substrate by vacuum evaporation. And then, Blue color emission layer was deposited using GDI602 as a host material and GDI691 as a dopant. Finally, small molecule OLED with the structure of ITO/2-TNATA/NPB/GDI602+GDI691/Alq3/LiF/Al was obtained by in-situ deposition of Alq3, LiF and Al as electron transport material, electron injection material and cathode, respectively. Blue OLED fabricated in our experiments showed the color coordinate of CIE(0.14, 0.16) and the maximum luminescence efficiency of 1.06 lm/W at 11 V with the peak emission wavelength of 464 nm.

• 한국연안방재학회지
• /
• 제5권4호
• /
• pp.173-182
• /
• 2018

As the research about increasing the efficiency of dredging soil transport, the technology, which reduce the friction between pipe wall and fluid in the pipe and disturbed generating pipe blockage, has been developed. So for the purpose of applying this technology to real construction site, main test has been tried at the real scale test in field. As a test result, this paper will show 30% flow efficiency increasing by permitted electro magnetic force to the pipe. And test result was evaluated as a ultra sonic velocity profiler. To propose the design technique and the execution manual of the high efficiency dredging material transport technic, this research have confirmed flow status changing depending on a soil material kind under electro-magnetic field and analyze the effect of electro-magnetic field which affects to each dredged soil material transportation. For achieving this research, EMF(Electro-Magnetic Field) generator is installed on the dredger(20,000HP) and through monitored flow status, dredging soil flow rate and sampled material specification is confirmed. Also dredger operating condition is measured and dredger power for soil transportation, hydraulic gradient and flow rate are compared, as transportation efficiency is calculated by this parameter, it is possible to check transportation efficiency improvement depending on each dredged soil material under electro-magnetic field. To verify the technique of dredged soil transfer using electromagnetic field, which is the core technique of the high efficiency dredged soil transfer, and the technique of expert system for pipeline transfer and the flow state. This could lead to a verification of transfer efficiency according to the characteristics of the dredged soil (sand, clay, silt) and the transfer distance (5km, 10km, 15km), which is planned to be used for a technology development of pump power reduction and long-distance transfer applying the high efficiency dredged soil transfer technology.

• Composites Research
• /
• 제19권2호
• /
• pp.1-6
• /
• 2006

복합재료를 사용하여 우주항공 부품을 설계할 때 국내는 물론, 미국을 비롯한 우주항공선진국의 감항규정에서 민간과 군용 모두 통계적으로 산출된 값을 사용할 것을 요구하고 있다. 그러나 이 기준을 만족하기 위해서는 방대한 데이터베이스가 필요하여 시험 비용 및 시간이 큰 문제가 되어왔다. 최근 미국 NASA/FAA에서 시험 개수를 줄이면서 동시에 통계적 기준을 만족할 수 있는 새로운 설계허용값 산출방법을 AGATE 프로그램을 통해서 개발하였다. 특히 이미 인증된 재료를 다른 사업에 사용하기 위해서 사용할 수 있는 재료동등성 시험(Material Equivalency Test)은 국내의 사업에 직접 적용할 수 있는 중요한 개념이다. 본 논문에서는 국내에서 사용하고 있는 복합재료의 특성을 공유하여 비용을 절감하고 재료특성을 정확히 관리할 목적으로 재료 동등성 및 수락시험 절차를 설명하고, 예로서 국내에서 개발한 고온용 탄소복합재료의 설계허용값을 산출하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.229-230
• /
• 2005

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권2호
• /
• pp.86-98
• /
• 2016

In this study, after the installation of a subsea pipeline, backfilling was performed in the trenched area. During these operations, a stability problem in the subsea pipeline occurred. The pipeline was directly impacted by environmental loading such as waves and currents that were caused by backfill material when scouring or sediment transport and siltation was carried out. Therefore, this study reviewed whether trenching was necessary, and conducted research into an indigenous seabed property that contains granular soil. A study of cohesive soil was also conducted in order to cross-correlate after calculating the values of the critical Shields parameter relevant to elements of the external environment such as waves and current, and the shear Shields parameter that depends on the actual shearing stress. In case of 1), sedimentation or erosion does not occur. In the case of 2), partial sedimentation or erosion occurs. If the case is 3), full sedimentation or erosion occurs. Therefore, in the cases of 1) or 2), problems in structural subsea pipeline stability will not occur even if partial sedimentation or erosion occurs. This should be reflected particularly in cases with granular and cohesive soil when a reduction in shear strength occurs by cyclic currents and waves. In addition, since backfilling material does not affect the original seabed shear strength, a set-up factor should be considered to use a reduced of the shear strength in the original seabed.

• 한국전산구조공학회논문집
• /
• 제18권3호
• /
• pp.245-254
• /
• 2005

방사성물질은 다양한 분야에서 사용되고 있으며 이에 따른 국내 및 국제간 운반이 계속적으로 증가하고 있다. 방사성물질을 수송하기 위해서는 수송용기의 안전성이 확보되어야 한다. 방사성물질 수송용기의 안전규정에 관해서는 국내 원자력법 운반안전규정 및 IAEA 운반규정에서 규정하고 있다. 방사성물질 수송용기 중에서 사용후핵연료를 운반하는 수송용기는 본체와 충격완충제로 구성되어 있다. 본 논문에서는 사용후핵연료 수송용기의 충격완충제에 작용하는 충격력을 계산하는 간편한 실험식을 차원해석을 통하여 유도하였다. 해석결과는 기존의 충격면적법 및 유한요소해석과 비교를 통하여 그 타당성을 입증하였다. 본 실험식을 이용하여 수송용기의 낙하충격력을 쉽게 예측할 수 있다.

• 한국지능시스템학회논문지
• /
• 제20권3호
• /
• pp.394-399
• /
• 2010

본 논문은 중량물 운송을 위한 AGV(autonomous guided vehicle)의 주행 제어 방법에 관한 연구이다. 일반적으로 실제 산업 현장에서 하루 20시간 이상 작업하는 경로 추적 방식의 fork-type AGV는 팔레트 하역 작업 시에 목표 지점에 대한 높은 정지 정밀도와, AGV의 정지 정밀도를 높이기 위해 저속으로 주행 하는 기술이 요구 된다. 따라서 본 논문에서는 엔코더의 데이터를 계측 받아 AGV의 주행 속도를 측정 및 분석하여 AGV의 최저 주행 속도 유지 및 AGV의 정지 정밀도를 높이는 주행 제어 방법을 연구 하였다. 본 논문에서 제안한 주행 제어 방법의 실험은 팔레트 앞 4m 지점부터 직선 주행후에 팔레트 하역 작업을 수행하도록 하였고, 총 10회 실험 후에 이들의 정밀도를 분석하였다. 그 결과, 팔레트 하역 시 목표 지점에 대한 정지 정밀도의 최대 오차가 18.64mm이내로 높은 정지 정밀도의 안정적인 주행 제어가 가능함을 확인 할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제40권4호
• /
• pp.409-416
• /
• 2015

Purpose: This study evaluates a new banana bulk packaging method under the real transport conditions of Sri Lanka. Methods: A field evaluation of optimized 8-mm thick Styrofoam sheets used as the cushioning material was applied. A trial transport was conducted from Thambuttegama to Colombo using a medium-sized open truck, with banana leaves as the control material. Data were recorded at the farmer, transporter, retailer, and consumer stages of the supply chain. Mechanical damage, physiological loss in weight, fruit firmness, total soluble solids, ripeness index, visual quality ratings, and the physical damage index of the bananas were measured at each stage. A cost-benefit analysis was also conducted for both packaging methods. Results: The 8-mm styrofoam sheets significantly reduced (p < 0.05) the mechanical damage from 26.3% to 12.9% compared to the conventional method for long-distance transport, and the physiological loss in weight showed a decrease of 2.88%. The loss of firmness of the fruits followed a simmilar pattern for both methods until reaching the retailer, but at the consumer was significantly higher (p < 0.05) for the control. However, the physical damage index at the retail stage for the control showed symptoms of physical injury, whereas the bananas transported using the cushioning materials exhibited only minor symptoms. Further, the visual quality of the fruits after transport from the farmer to the consumer was preserved, which is one of the main factors affecting consumer preference and retail price. The proposed method increases the profit margin by 51.2% for Embul bananas owing to the reduced postharvest losses. Conclusion: The 8-mm thick Styrofoam sheets reduced the physical damage to the bananas, with the quality parameters maintained at the prefered level. Moreover, profits may be increased.