• 소성∙가공
• /
• 제4권3호
• /
• pp.245-256
• /
• 1995

SMC(Sheet Molding Compound), a thermoset composite material which consists of unsaturated polyester resin, fiberglass strands, fillers, and various chemical additives for curing agent, has been widely used in fabrication of structural components. The mechanical properties of molded SMS parts are strongly dependent on material flow results during compression molding process, while such flow in molds is affected by material characteristics. For numerical simulation of SMC molding process, estimation of material property of SMC must be accomplished. In this study, flow resistance of SMC was estimated through a simple compression test using a lubricant with grease oil under the constant strain rate condition at various temperatures and the result was compared with other material data available in the literature. The accuracy of the experimentally determined flow resistance was tested by finite element analyses of compression molding of SMC. Simulation results were compared with experimental results under the plane strain condition.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.589-593
• /
• 2015

The demand of high cycle fatigue behavior on plate material is increasing because of its various applications. However, the high-cycle fatigue life data of the plate material is very rare compared to the rod material. Thus, in this study, a plate specimen is designed for the ultrasonic fatigue test because it is time efficient as compared to the conventional fatigue test. To apply the ultrasonic fatigue test, the specimen design is required to resonate at 20 kHz. Therefore, the dynamic elastic modulus was determined by measuring the resonance frequency with a piezoelectric element and laser doppler vibrometer (LDV). As a result, the plate specimen is designed and demonstrated using the ultrasonic fatigue testing machine. The ultrasonic fatigue test results were compared with the hydraulic fatigue test results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.360-360
• /
• 2010

반도체 산업은 지속적인 design rule 감소로 인해 직접도 및 Pin Count가 점점 증가함에 따라 보증해야할 회로의 수와 기능이 더불어 증가하고 있으며, 그 중 Test Cost 감소 방법 확보가 시급하게 되었다. 이에 따라 Test Cost 감소와 직결된 Test Time 감소 방법이 다양하게 제시되고 연구되고 있다. 본 논문은 Test Time의 한 부분인 반도체 검사 장비 (Automatic Test Equipment)의 효율적인 제어 방법을 제공함으로써, 관련 분야의 이해를 돕고자 한다.

• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.75-85
• /
• 2008

아스팔트 혼합물의 수분손상은 물의 침투로 인해 아스팔트 피막과 골재 사이의 부착력이 손실되면서 발생하는 현상으로서, 이는 아스팔트 포장의 주요 파손형태 중 하나인 포트흘의 주요원인으로 알려져 있다. 이에 본 연구는 반복적인 수침에 의한 수분손상이 일반 아스팔트 혼합물의 재료물성에 미치는 영향을 평가하고자 수행하였다. 이를 위해 기존의 수분손상 시험법인 수정 라트만 시험의 수분 동결-응해 방법을 반복적으로 적용한 일반 아스팔트 혼합물을 대상으로 간접인장시험에 의한 상온물성의 변화특성을 평가하였다. 이를 통해 일반 아스팔트 혼합물의 상온물성은 수침횟수의 증가에 따라 초기에는 급격하게 감소하다가 이후 완만한 감소추세를 나타내었으며, 초기 수분손상에서 물성값의 약 50% 이상이 손실되는 것으로 관측되었다. 또한 파괴시점을 고려한 아스팔트 혼합물의 조기 수분손상 특성을 파악하는데, $25^{\circ}C$의 파괴 에너지와 크리프 변형 에너지를 이용한 재료물성의 손상비가 가장 높은 상관성을 나타내는 것으로 평가되었다.

• 콘크리트학회논문집
• /
• 제24권1호
• /
• pp.45-52
• /
• 2012

최근에 콘크리트 구조물의 보강에 섬유복합재(FRP), 폴리우레아(PolyUrea), 그리고 이들을 함께 적층하여 사용하는 다중혼합 보강재료를 사용한 외부 보강공법에 대한 연구가 활발히 진행되고 있다. 이와 같은 외부부착에 의한 보강공법들은 콘크리트와 보강재료 사이의 경계면 거동이 전체 보강된 구조물의 성능을 좌우하게 된다. 그러므로, 이 연구에서는 보강재료의 종류와 보강순서에 따른 콘크리트와 보강재료 사이의 부착전단 거동을 실험적으로 평가하였다. 부착전단 실험을 위하여 콘크리트 부재에 탄소섬유복합재(CFRP), 폴리우레아(PolyUrea, PU), 탄소섬유복합재 보강 후 폴리우레아(CPU), 폴리우레아 보강 후 탄소섬유복합재(PUC)의 보강재료로 부착하였으며, 콘크리트와 보강재료의 부착전단력 이외 발생할 수 있는 하중발생을 최소화하기 위하여 부착전단 시편고정장치를 개발하여 실험을 수행하였다. 이 실험 결과를 통해 탄소섬유복합재와 폴리우레아를 혼합한 복합재료가 높은 부착전단강도와 에너지 흡수성능이 뛰어남을 검증하였다.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.11-19
• /
• 2014

Reliability of the novel automatic system capable of measuring both St$\ddot{o}$ckigt sizing degree and contact angle at a time was evaluated through the calculation of its repeatability and reproducibility based on TAPPI Standard Method T 1200. As the basis weight of paper specimen increased, the repeatability and reproducibility of the automatic system became more improved than those from Hercules sizing test and contact angle test designated on TAPPI Standard Method T 530 and T 558. The more improved repeatability and reproducibility implies that a single tester can obtain the similar results under similar test conditions in spite of repetitive testing using the automatic system, and likewise that multiple testers can respectively reproduce similar data without big variation from the same paper specimen using the automatic system. In conclusion, this study is greatly meaningful in having developed the world's first automatic system to measure both St$\ddot{o}$ckigt sizing degree and contact angle simultaneously with excellent repeatability and reproducibility.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.5157-5164
• /
• 2010

국내의 폐석회는 약 320만 톤이 적치되어 있고 매년 약 10만 톤이 발생하고 있다. 본 연구에서는 도로노반 성토재로서의 재활용을 위한 폐석회 혼합토의 특성에 대하여 일련의 실험을 수행하였다. 시험에 사용한 폐석회는 인천의 모 화학공장에서 소다회($Na_2CO_3$)를 생산하는 공정에서 부수적으로 발생하는 부산물이다. 화강풍화토, 점토, 쇄석에 폐석회를 일정비율로 혼합한 폐석회 혼합토에 대하여 비중시험, 입도분석, Atterberg시험, 다짐시험, 일축압축시험, CBR, 투수시험, 전단시험, 마모시험, 및 모래당량시험을 실시하였다. 시험결과를 토대로 폐석회 혼합토는 폐석회를 20%정도 혼합하였을 때, 도로의 노반성토재의 품질기준을 만족하는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.62-67
• /
• 2005

Recently, polymer insulators that are used for high voltage applications have some advantages such as light weight, small size, vandalism resistance, hydrophobicity and easy making process. During outdoor service of polymer insulators, the surface of the insulating material is frequently subjected to moisture and contamination that lead to dry band arcing. Their tracking resistance, erosion resistance, end sealing and shed design are very important because dry band arcing causes degradation of polymer surface. Aging test to estimate life property of polymer insulator is executed through several international standard such as IEC 61109 and CEA tracking wheel test, but is not getting clear conclusion yet. There are two methods in the diagnosis method of polymer insulator such as off-line and on-line. The diagnosis methods in off-line are external condition analysis by the eye, contaminant analysis on surface, surface analysis, pollution withstand voltage test, power frequency flashover voltage test, lightning impulse flashover test, tensile fracture load test and flexural load test. Polymer material is also investigated it's tracking resistance by adding surface active agent in IEC 587. In this paper, the tracking performance of polymer insulator with salt solution which is added surface active agent. The diagnosis of insulator sample has been analyzed by leakage current and visual examination, STRI guide and thermal image camera.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.66-76
• /
• 2017

This paper is concerned with investigating the plastic material properties of steel plate formed by line heating method, and is aimed at implementing more rational design considering the accidental limit states such as collision or grounding. For the present study, line heating test for marine grade steel plate has been carried out with varying plate thickness and heating speed, and then microscopic examination and tensile test have been carried out. From the microscopic, it is found that the grain refined zones like ferrite and pearlite are formed all around the heat affected zone. From the tensile test results, it is seen that yield strength, tensile strength, fracture strain, hardening exponent and strength coefficient vary with plate thickness and heat input quantity. The formulae relating the material properties and heat input parameter should be, therefore, derived for the design purpose considering the accidental impact loading. This paper ends with describing the extension of the present study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.547-552
• /
• 2002

The research sees the catenary dropper clamp using a test equipment which is using actual sample in the field. This test helps the quality improvement of material. For raising the reliability of data, classified it by type and tests especially in the multiple sample but it was under testing in the sample of decimal at circumstance. From the accuracy side of research data it was insufficient because the dropper clamp was in small quantity but it contributes in quality of material improvement. The quality of material data which it gets with spectroscopic was not accurate so hereafter it needs to follow wet analysis and precise analysis to join in the test which is detailed comes to accomplish with the data accuracy.