• Title/Summary/Keyword: material standardization

Search Result 233, Processing Time 0.022 seconds

Development of Multiwire Proportional Counter for Measurement of Environmental-level Alpha Particles (환경준위 알파입자측정을 위한 다중선 비례계수기 개발(I))

  • Oh, Pil Jae;Park, Tae Soon;Lee, Min Kie;Kim, Kyung Hwa
    • Analytical Science and Technology
    • /
    • v.9 no.3
    • /
    • pp.262-269
    • /
    • 1996
  • The muiltiwire proportional counter for the measurement of low-level and environmental $\alpha$ particles emitting nuclides was developed. External dimension of the devloped multiwire proportional counter is $350{\times}290{\times}30mm$ and the sensitivity area is $250{\times}200mm$. The wall material of the detector was selected the stainless steel to prevent the deformation by external impact and to obtain minimum background. The anode and cathode wires were used the stainless steel material of diameter $50{\mu}m$. The spacing of each wires are 10.0mm, 5.0mm and the numbers of total wire are 21, 42 lines, respectively. The multiwire proportional counter was designed that the measurement source is placed within the detector to prevent the wall absorption effect and the efficiency variation by various source heights. The characteristics of the developed detector have been investigated to obtain the plateau, operating voltage, background, counting efficiency, position sensitivity and energy resolution etc. For the $^{241}Am$ nuclide, the calculated LLD(Lower Limit of Detection) is 5.0mBq/L which is lower than 40mBq/L of recommended LLD value by ISO(International Organization for Standardization).

  • PDF

Investigation on Products and Regulation of Flexible Adhesive Rubber Asphalt Type Sealant for the Development of Korea-China Joint Standard (점착유연형 고무아스팔트계 씰재의 한중 공동 품질관리 규정 개발을 위한 제품 및 기술기준 현황 조사)

  • An, Ki-Won;Kim, Dong-Bum;Choi, Su-Young;He, Xing-Yang;Oh, Sang-Keun
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.7 no.4
    • /
    • pp.323-332
    • /
    • 2019
  • Non-curable rubberized polymer asphalt waterproof coating materials in Korea and China are manufactured without advanced quality control techniques and common standard, And they are exposed consistent water leakage problems. Import and application of Korean waterproofing products and installation methods is difficult in the present situation as the Chinese standard(JC/T 2428) is different in nature with the Korean counterpart products, And quality assurance is inevitable based on mutual standards. In order to resolve this issue, alternatives such as using standards provided by the ISO (International Organization for Standardization) are generally employed, but there is no such ISO standard as a waterproof material for non-curable rubberized polymer asphalt material. Furthermore, it is unreasonable to develop the ISO standard for rubber asphalt seals for exchange in terms of time and cost. This study proposes that the establishment of a quality standard that can be applied for both countries will be required via an joint international standard that outlines the properties of materials if applied in mutual trade exchange.

Study on surface processing design of aluminum alloy materials that is applied to IT and electronics (IT 및 전자제품에 적용되는 알루미늄 합금소재의 표면처리디자인에 관한 연구)

  • Han, Jisu;Kim, Pureum;Kim, Hyun-Sung
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.27 no.4
    • /
    • pp.212-219
    • /
    • 2017
  • To become a person that is suitable to the 'High-Touch' generation where emotion takes over, we can focus on 6 skill including design, story, harmony, empathy, play, and meaning. Among these skills, harmony with design was chosen as the most important skill. Design can be seen as the basic element of all business, but it will be difficult to match the flow of the future Sensibility and intuitive generation with just the modern design that has been made based on reasonable and objective information and knowledge. This study suggests system and standardization of Sensibility surface processing design that satisfies great quality, attractive quality and Sensibility quality by applying surface processing design of product and Sensibility cognitive factors felt by the consumer by setting differentiated strategy and CMF (Color, Material, Finishing) understanding along with the importance of design materials in primary aspect. By considering the efficacy/characteristic of new surface processing characteristic/differentiation/possibility of implementation according to setting direction of differentiated CMF strategy per type of parts applied to the product, visual surface processing sample was implemented. Through this, it is expected that practical communication connected tool and Sensibility surface processing design's strategic access framework can be applied by understanding and sharing comprehensive elements such as target product, part type, applied material, applied surface processing, surface color, surface texture, and implementing feeling to environments such as designers, CMF designers, surface processing experts, and engineers in IT, electronics, and other areas. when developing a product.

A Study on the Paper Clothing -on the basis of handmade paper- (종이 의상에 관한 연구 - 수제지를 중심으로 -)

  • 이주실;김정혜
    • Journal of the Korean Society of Costume
    • /
    • v.44
    • /
    • pp.181-199
    • /
    • 1999
  • The industry of modern clothing has deviated from the overflow of commercialism and the standardization and nowadays is going toward pursuing art, creativity, and high added value. This trend brings the return of the natural materials from the synthetic textiles and increases the value of old and handmade fabrics. Finally, the handmade-paper, which is a natural material, comes to be reconsidered as a new material for the clothing. Therefore, as the natural materials and the manufacture of handmade clothing are rising again, the qualitative improvement and globalization of clothing industry should be first realized through the developments of creative and various clothing materials and new expressing techniques. The above investigation and study have been synthesized and analyzed as follows: First, through the study on the origin of the paper clothing, its historical background and the process of its development, we've learned these two facts following : the paper clothing of the East in the past mostly had practiced meanings. On the other hand, in the West it had meanings which were raised the artist's emotions and beauty-consciousness to the artistic level by the various kinds of expressing methods. Second, handmade-paper was manufactured by the embedding method, which mixed mulberry pulp, gauze, corn, hair, sisal, silk and so on. It was found that handmade-paper had the affluent and proper texture as the clothing material and was be able to control the clarity through the variation of thickness. It was also confirmed that the creative and original texture with hand-worked molding beauty was obtained by the use of handmade-paper. Third, when the handmade-paper is used, the molding beauty of plane, relievo, and solid can be freely pursued, and various and effective molding conformation can be constructed by the effect of superposition and repetition. Also, because the maximum discretion from the various optional manufacturing methods is allowed, the molding beauty can be maximized when the clothes are manufactured with handmade-paper. Fourth, the gauze with strong drape was combined to overcome the stiffness and the tearing of the paper. As a result, the durability and the wearability of the paper were strengthened and thus the thus the applications as the clothing material were enlarged. In conclusion, in order to enhance the value, creativity, practicality, and artistic sense of the design for modern clothing, the clothes made of handmade-paper should be more studied. Moreover, for the generalization of paper clothes, the studies on the development of practical paper with paper with water resistance, post-treatment after dyeing, flexibility, and durability should be done. I really hope that this study will be the motive to provoke the possibility of handmade-paper as new clothing material in not only practical sense but also artistic sense.

  • PDF

A Three-dimensional Biomechanical Model for Numerical Simulation of Dynamic Pressure Functional Performances of Graduated Compression Stocking (GCS)

  • Liu, Rong;Kwok, Yi-Lin;Li, Yi;Lao, Terence-T;Zhang, Xin;Dai, Xiao-Qun
    • Fibers and Polymers
    • /
    • v.7 no.4
    • /
    • pp.389-397
    • /
    • 2006
  • The beneficial effects of graduated compression stockings (GCS) in prophylaxis and treatment of venous disorders of human lower extremity have been recognized. However, their pressure functional performances are variable and unstable in practical applications, and the exact mechanisms of action remain controversial. Direct surface pressure measurements and indirect material properties testing are not enough for fully understanding the interaction between stocking and leg. A three dimensional (3D) biomechanical mathematical model for numerically simulating the interaction between leg and GCS in dynamic wear was developed based on the actual geometry of the female leg obtained from 3D reconstruction of MR images and the real size and mechanical properties of the compression stocking prototype. The biomechanical solid leg model consists of bones and soft tissues, and an orthotropic shell model is built for the stocking hose. The dynamic putting-on process is simulated by defining the contact of finite relative sliding between the two objects. The surface pressure magnitude and distribution along the different height levels of the leg and stress profiles of stockings were simulated. As well, their dynamic alterations with time processing were quantitatively analyzed. Through validation, the simulated results showed a reasonable agreement with the experimental measurements, and the simulated pressure gradient distribution from the ankle to the thigh (100:67:30) accorded with the advised criterion by the European committee for standardization. The developed model can be used to predict and visualize the dynamic pressure and stress performances exerted by compression stocking in wear, and to optimize the material mechanical properties in stocking design, thus, helping us understand mechanisms of compression action and improving medical functions of GCS.

A study on the supply status of chemical substance information including MSDS and a way of improving Database management in Korea (국내 MSDS 등 화학물질정보의 제공실태와 DB관리 개선방안 연구)

  • Lee, Kwon Seob;Yoon, Seok Joon;Choi, Jae Wook;Kim, Hyun Ock;Lee, Jong Han;Yang, Jeong Sun
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.17 no.1
    • /
    • pp.63-70
    • /
    • 2007
  • This study investigated the current management staus of chemical substance information on Material Safety Data Sheets(MSDS) and Chemical Information Cards(CIC) provided by Korea Occupational Safety & Health Agency(KOSHA) and also researched the kind and the characteristics of chemical substance information provided in other organizations. MSDS DB in Korean provided on KOSHANET(which is Kosha website) is 50,802 in total, among whom are single chemical substances with 31,870 kinds(18,932%) and are mixed chemical substances with 31,870 kinds(62.7%). The number of visiting MSDS DB on KOSHANET for the search of chemicals was 2,049,806. The number has increased each year. The CIC provided for workplaces is all 542 kinds : 14 harmful substances subject to permission, 168 harmful substances subject to management, 360 KOEL(Korean Occupational Exposure Limits) establishment substances. MSDS internationally provided by organizations producing MSDS DB was written with 16 sections, which is suitable for the writing basis of American Standards Institute(ANSI) and International Organization for Standardization(ISO) and provided chemical substance information on more than 100,000 kinds in most organizations.

A Study on the Shroud around Kwanju and Chonnam Area (광주.전남지역 수의에 관한 실태 조사)

  • Yim, Linn;Kim, Yong-Seo
    • Journal of the Korean Society of Costume
    • /
    • v.51 no.2
    • /
    • pp.93-103
    • /
    • 2001
  • This Study shows local characters, meaning, value and others (kind, function, material, shape, name) on Shroud through documents and fact-finding survey. In Shroud′s kind and function, Shroud of Kwangju Area is similar with one of Youngsan-river Area, while Sumjin-river Area and Coastal Area, each has its own character due to difference of Burial Culture. In Shroud′s Material, hemp cloth, white cotton cloth and calico, have been well-used in Kwangju and Youngsan-river Area, while silk has used in Sumjin-river and Coastal Area. Shroud′s color has followed Natural color. In Shroud′s shape, Male Jeoksam, Female Trousers, Um, Myokmok, Aksoo, Bib have their local characters. They are reformed in Kwangju Area and Youngsan-river Area. Jeoksam in Coastal Area, Female Trousers in Sumjin-river Area. Um in Coastal Area and Myokmok in Sumjin-river Area, have its unique character. In Shroud′s name, Shroud has widely been called "Dead Clothes", and called "Blind Clothes", "Munnyung Clothes" some areas. In Sumjin-river Area, Summer Jacket has been failed "Deungjigae", Dango called "Ddangjungwee". In Coastal Area, Myokmok and Aksoo have been called "Face Cover" and "Hands Cover", Shroud′s local characters have been caused by Next World, which has reflected local natural environment and cultural features. Next World is so abstract that it can not be expressed well, while Reality is clearly divided into dual spaces : Real World, Next World. Comprehension on Next World, helps harmonize recent values with Shroud meaning and prevents Shroud from standardization and transformation.

  • PDF

Designing External Metadata of National Geography Institute for Distributing Digital Maps (수치지도 공급을 위한 국립지리원 외부메타데이터의 설계)

  • Kim, Kye-Hyun;Kim, Hee-Du;Lim, Sam-Sung;Lee, Kyung-Sook;Yu, Seung-Keun
    • Journal of Korea Spatial Information System Society
    • /
    • v.1 no.1 s.1
    • /
    • pp.89-98
    • /
    • 1999
  • The major purpose of this study wa to desgin a external metadata of National Geography Institute(NGI) for the effective management and distribution of the digital maps. For designing a standard external metadata reflecting the current trends of the international organizations on standardization, a prelimenary study was made mainly concentrating on the analysis of the metadata of the developed countries along with domestic cases. For better assessing NGI needs, all the metadata related material of the NGI were collected and classified based on the NGI's workflow. The external metadata draft was made considering the results from the analysis of the existing NGI material and the draft was also cited some major cores from the ISO standards. Continuous efforts should be made in the future to update the metadata draft based on the opinions from the NGI engineers and the technical trends of the international organizations.

  • PDF

Welding process for manufacturing of Nuclear power main components (원자력 발전 주기기 제작에 적용되는 용접공정)

  • Jung, In-Chul;Kim, Yong-Jae;Shim, Deog-Nam
    • Proceedings of the KWS Conference
    • /
    • 2010.05a
    • /
    • pp.43-46
    • /
    • 2010
  • As the nuclear power plant has been constructed continuously for several decades in Korea, the welding technology for components manufacturing and installation has been improved largely. Standardization for weld test and qualification was also established systematically according to the concerned code. The welding for the main components requires the high reliability to keep the constant quality level, which means the repeatability of weld quality. Therefore the weld process qualified by thorough test and evaluation is able to be applied for manufacturing. Narrow gap SAW and GTAW process are usually applied for girth seam welding of pressure vessel like Reactor vessel, steam generator, and etc. For the surface cladding with stainless steel and Inconel material, strip welding process is mainly used. Inside cladding of nozzles is additionally applied with Hot wire GTAW and semi-auto welding process. Especially the weld joint having elliptical weld line on curved surface needs a specialized weld system which is automatically rotating with adjusting position of the head torch. The small sized pipe, tube, and internal parts of reactor vessel requests precise weld processes like an automatic GTAW and electron beam welding. Welding of dissimilar materials including Inconel690 material has high possibility of weld defects like a lack of fusion, various types of crack. To avoid these kinds of problem, optimum weld parameters and sequence should be set up through the many tests. As the life extension of nuclear power plant is general trend, weld technologies having higher reliability is required gradually. More development of specialized welding systems, weld part analysis and evaluation, and life prediction for main components should be taken into a consideration extensively.

  • PDF

Preliminary pharmacognostical and phytochemical evaluation of Stachys tibetica Vatke

  • Kumar, Dinesh;Bhat, Zulfiqar Ali;Kumar, Vijender;Chashoo, Ishtaq Ahmad;Khan, Nisar Ahmad;Ara, Irfat;Shah, Mohammad Yassin
    • CELLMED
    • /
    • v.2 no.1
    • /
    • pp.11.1-11.7
    • /
    • 2012
  • Stachys tibetica Vatke (Lamiaceae) is an important medicinal plant in the folk medicine of Ladakh, India and Tibet for the treatment of various mental disorders. Infusion and decoction of the whole plant is used as a cup of tea for a severe fever, headaches and to relieve tension. The recent study is aimed to evaluate the preliminary pharmacognostical and phytochemical nature of Stachys tibetica Vatke. The whole plant material was subjected to successive soxhlet extraction with petroleum ether (40 - $60^{\circ}C$), chloroform, ethyl acetate, methanol and finally decocted with water to get the respective extracts. The fluorescence characteristics of the powdered materials were analysed under ultraviolet light and ordinary light. Different physicochemical parameters such as ash value, extractive value, foaming index, pH values, loss on drying and determination of foreign matter were carried out as per WHO guidelines. The total fat, flavonoid, saponin and volatile contents were also determined. Macroscopical studies revealed the authentication of the plant drug. Physicochemical parameters helped to standardize the plant material while preliminary qualitative chemical tests of different extracts showed the presence of Glycosides, Carbohydrates, Phytosterols/triterpenoids, Saponins, Fixed oils, Fats and phenols/tannins. Quantification of the total flavonoids and saponins and contents were determined as $54.66{\pm}0.58mg/g$ and $75.42{\pm}0.48mg/kg$ respectively, while the volatile and fat contents were 6.5% and 0.7% respectively. Results may lay the foundation for the standardization of the drug and discovery of new molecules from S. tibetica for the treatment of various diseases.