• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1998년도 추계학술발표회 논문집
• /
• pp.241-246
• /
• 1998

This paper considers the applicability of a pseudosteady-state approach to the long-time behavior of real gas flow in a closed reservoir. The method involves a combination of a linearized gas diffusivity equation using a normalized pseudotime and a material balance equation. Comparison with a commercial reservoir simulator showed that highly accurate values of pseudopressure drawdown and well pressure are obtained by the pseudosteady-state approach with much less computational effort.

• 대한치과의사협회지
• /
• 제55권1호
• /
• pp.72-81
• /
• 2017

Regardless of the type of impression being made, the tray is the most important part of the impression-making procedure for completely edentulous patients. Dentists have to make use of a combination of rigid, thermoplastic, and resilient materials and control step-by-step procedure from irreversible hydrocolloid impression to definitive cast fabrication. For successful edentulous impression, some considerable clinical tips were guided.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.20-23
• /
• 2009

Black-white reflective cholesteric liquid crystal display was prepared with two color liquid crystal layers, the combination of yellow color liquid crystal and blue color liquid crystal. The rubbing of cholesteric liquid crystal panel affects the brightness and color spectrum due to increase the planar domain texture. The CIE chromaticity coordinate of white is (0.31, 0.31).

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.133-140
• /
• 1997

Based on the Green's function technique, an analytical approach is developed to examine the surface wave screening effectiveness of composite wave barriers. The composite barrier consists of a high velocity layer sandwiched between two thin layers of low shear velocity materials. The high velocity layer is represented by differential matrix operators which relate the wave fields on each side of the layer. The low velocity layers are modeled by non-rigid contact conditions which allow partial sliding at the interfaces. Screening ratio of barriers with various combination of material, geometric, and non-rigidness parameters are compared and discussed in some detail.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1503-1506
• /
• 2002

In this paper, a modified particle system is proposed for volcanic eruption with lava, ashes and smoke. In the proposed method each eruptive material consists of particles. The movement of particles is determined by the external force and interaction (attraction: repulsion and viscosity) only in neighbor region. Since the method can be executed in combination with the geographic information, the proposed method may also be useful for disaster prevention.

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.75-82
• /
• 2006

Fretting corrosion widely known as a degradation mechanism refers to the combination of fretting wear and corrosion such as oxidation. This paper critically reviews the works published previously on fretting corrosion of electrical connectors. Various experimental approaches such as testing machines, material selection, testing environments, acceleration testing techniques and preventing methods are addressed. Future research prospects are suggested.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.17-24
• /
• 1998

This paper deals with the springback characteristics of cold rolled sheet steel through the use of the V-bending process and U-bending one. The influence of material properties on the springback of forming processes was investigated. In the V-bending process there was an optimum bend radius for each combination of parameters which produced minimal springback. In the U-bending process the blank holder force can control the degree of springback. A high blank holding force resulted in a uniform strain distribution and reduced the level of springback.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.814-816
• /
• 1993

Fuzzy controllers still remain ill-accepted in the control community. As a matter of fact, their design relies on a new relation between the material world and the scientists. Whereas some theoritical studies are carried out on this subject, experimentations on processes show what fuzzy techniques can bring to the control theory.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.29-34
• /
• 2008

Magnesium diboride ($MgB_2$) is an inexpensive and simple superconductor. This material was first synthesized and its structure confirmed in 1953 but its superconducting properties were not discovered until 2001 when they caused great excitement. In this study, superconducting $MgB_2$ thin films on the r-$Al_{2}O_3$ substrates have been grown by the combination of radio frequency magnetron sputtering of B and thermal evaporation of Mg. The deposition conditions were varied by changing deposition rate. Before the co-deposition of Mg and B, the deposition rates of each element have been measured separately. The $MgB_2$ layers had 400nm in thickness and superconducting transition temperatures have been measured around $\sim$38.6K. Superconducting properties have been measured by PPMS, XRD, and SEM.

• 화약ㆍ발파
• /
• 제38권3호
• /
• pp.15-29
• /
• 2020

본 논문에서는 Hoek-Brown (HB) 파괴기준을 Holmquist-Johnson-Cook (HJC) 콘크리트 재료모델에 접목시킴으로써 LS-DYNA 상에서 암반발파를 모델링할 때 현장암반의 고유한 특성이 잘 반영될 수 있도록 도모하였다. 이것은 많은 지질학적 불연속면을 포함하고 있는 현장암반이 지니고 있는 독특한 특징을 강조하기 위함이다. 두 모델의 접목은 HB 파괴기준으로 HJC 재료모델의 정적 강도 부분을 교체함으로써 이루어지며, 교체과정은 통계학적 곡선적합 기법에 의해 수행된다. 본 논문에서는 접목의 과정이 상세하게 소개되며, 획득된 HJC 재료모델의 사용에 대한 실례도 제시된다. 제시된 수치계산은 현장의 석회암 암반의 단일공 발파에 대한 평면변형률 모델링으로서 LS-DYNA가 제공하는 유체-구조물 상호작용(FSI) 기법과 다중재료 라그랑주-오일러(MMALE) 정식화 기법을 조합하여 수행된다.