• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.781-785
• /
• 1995

from the $K_{6}$P$_4$ $O_{13}$ flux using a temperature cooling method. According to SHG outpower measurement, phase matching angle is $\theta$=90$^{\circ}$, $\Phi$=23.3$^{\circ}$and angular acceptance of $\Phi$ direction is about 2 degree, Deviation of phase matching angle due to index inhomogeneity in KTP crystal is 0.17 degree. A 20mW green laser was obtained with the combination of a intracavity Nd ; YAG and KTP crystal.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.5
• /
• pp.227-234
• /
• 2009

The Paper introduces a new technique for block matching motion estimation. since the temporal correlation of a animation sequence between the motion vector of current block and the motion vector of previous block. In this paper, we propose the scene change detection algorithm for block matching using the temporal correlation of the animation sequence and the center-biased property of motion vectors. The proposed algorithm determines the location of a better starting point for the search of an exact motion vector using the point of the smallest SAD(sum of absolute difference) value by the predicted motion vector from the same block of the previous frame and the predictor candidate point on each search region. Simulation results show that the PSNR values are improved as high as 9~32% in terms of average number of search point per motion vector estimation and improved about 0.06~0.21dB on an average except the FS(full search) algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.458-465
• /
• 2004

To reaffirm the use of a mainstream CMOS process for designing passive-like attenuator structures, a linearly controlled variable attenuator is realized with 0.35${\mu}{\textrm}{m}$ 2-poly 4-metal CMOS process. It uses the П configuration for large attenuation range and suitable matching property. Compared to conventional passive-like CMOS attenuators, it is demonstrated that this work advances the frequency band from MHz to ㎓ (DC- l㎓), and reduces the size to 700${\mu}{\textrm}{m}$${\times}$300${\mu}{\textrm}{m}$.. Both simulation results and test results are provided. They show the improved linear relation between attenuation and control voltage. It is very useful in CDMA or GSM band, which uses under 1㎓ frequency band. An alternative topology, Bridged-T configuration, is proposed to get over the limit of applications by elevating operation bandwidth. The proposed topology covers over DC-2㎓ frequency band, which means that the proposed architecture can cover the tripleband (800MHz CDMA/GSM, 1.5㎓ GPS, 1.9㎓z PCS system) in applications as well. The simulation results are provided.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.384-386
• /
• 2014

As the type of property data of military terrain analysis map is using FACC of DIGEST, there is a limitation in utilizing a domestic thematic map which is in use of other type of property data. However, even though the attempts to utilize the domestic thematic map are made at military sites, the study has not been conducted enough. Therefore, we defined it by matching the property data necessary for the military terrain analysis cartography and property of the domestic thematic map, and analyzed in accordance with the method to analyze the cross-country movement roads specified in FM 5-33. But, there was no data for the diameter of trees in the vegetation map among a terrain analysis map, whereas there being data for the sort of trees. As the diameter of trees can be broken through to the extent of certain diameters by tracked vehicles, they are the factors necessary in analyzing. In this study, the research was conducted focusing on calculating the diameters for some trees described in a stand yield table by using the age-class for trees in a forest floor map with a scale of 1:5000 and calculating the diameters of trees by using the diameter-class for the diameters of other trees.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.469-475
• /
• 2015

This paper describes about the method for designing an extended Kalman filter to accurately measure the position of the spatial-phase system using a semiconductor sensor. Spatial position is expressed by the correlation of the rotated coordinate system attached to the body from the inertia coordinate system (a fixed coordinate system). To express the attitude, quaternion was adapted as a state variable, Then, the state changes were estimated from the input value which was measured in the gyro sensor. The observed data is the value obtained from the acceleration sensor. By matching between the measured value in the acceleration sensor and the predicted calculation value, the best variable was obtained. To increase the accuracy of estimation, designation of the extended Kalman filter was performed, which showed excellent ability to adjust the estimation period relative to the sensor property. As a result, when a three-axis gyro sensor and a three-axis acceleration sensor were adapted in the estimator, the RMS(Root Mean Square) estimation error in simulation was retained less than 1.7[$^{\circ}$], and the estimator displayed good property on the prediction of the state in 100 ms measurement period.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1906-1916
• /
• 1996

For the medical analysis of the three-dimensional structure such as the mandible, it is necessary to reconstruct the structure into the finite number of analyzable elements. The information of the three-dimensional structure can be obtained from the cross-sections of the magnetic resonance image (MRI). A region corresponding to the structure is extracted from the inner part of the cross- section. By the triangulation of the sampled cross-section image, two-dimensional finite elements are generated. Three-dimensional finite elements are constructed by matching the two dimensional finite elements each other in space. In this paper a construction method of the optimal three-dimensional finite elements has been suggested, which uses the adjacent information abstracted from the triangulated two-dimensional finite elements. The elements are classified into the identical property sets by using the adjacent information of the traingulated two-dimensional elements. After applying the multistep matching algorithm to the classified two-dimensional finite elements, the optimal three-dimensional finite elements can be construccted. By analyzing the constructed finite elements, it is possible to get much more useful medical information about the three-dimensional struture of mandible.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.34-44
• /
• 2006

A system-on-a-chip (SoC) design uses pre-verified IP hardware blocks in order to reduce design time. We need interface circuits to connect IPs with different protocols. In SoC design we should design interface circuits frequently and these tasks are somewhat time-consuming and error-prone. So it is necessary to generate the interface circuits automatically. Several studies have been made on generating interface circuits only from the communication protocols of IPs. With existing approaches, it is not easy to generate interface circuits connecting two IPs only from communication protocols: connection between IP with address and W without address, connection between IP with only one port to transfer address/data and IP with different ports for address and data connection between IP that transfer address and data together and IP that transfer only one address with a number of data in a burst. No consideration of various characteristics of IPs and no changed algorithm are responsible for it. In order to solve this problem, the proposed approach categorizes communication protocols of IPs, and takes characteristics matching of IPs into account during the interface synthesis. In experiments, we show that we could correctly generate and verify interface circuits for IPs with different characteristics.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.88-100
• /
• 1999

Detecting human face and facial landmarks automatically in an image is as essential step to a fully automatic face recognition system. In this paper, we present a new approach to detect automatically face and its eyes of input image with scale and rotation variations of faces by using an intensity based template matching with a single log-polar face template. In a template-based matching it is necessary to normalize the scale changes and rotations of an input image to a template ones. The log-polar mapping which simulates space-variant human visual system converts scale changes and rotations of input image into constant horizontal and cyclic vertical shifts in the output plane. Intelligent use of this property allows us to shift of the candidate log-polar faces mapped at various fixation points of an input image to be matched to a template over the log-polar plane. Thus, the proposed method eliminates the need of adapting multitemplate and multiresolution schemes, which inevitably give rise to intensive computation involved to cope with scale and rotation variations of faces. Through this scale and rotation involved to cope with scale and method can lead to detecting face and its eyes simultaneously. Experimental results on a database of 795 images show over 98% detection rate.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.86-90
• /
• 2003

A flat conversion loss in microwave mixer is hard to achieve if integrating with an image rejection filter(IRF). This is due to the change of termination condition with respect to the LO and IF frequency at RF port where the filter has 50 ohm termination property only in the RF band. This paper describes a flatness maintenance in the down mixer concerning a diode matching condition as well as an electrical length of embedding line at RF port. The implemented single balance diode mixer is suitable for a 23 ㎓ European Terrestrial Radio. RF, LO and fixed IF frequency chosen in this paper are 21.2∼22.4 ㎓, 22.4∼23.6 ㎓ and 1.2 ㎓, respectively. The measured results show a conversion loss of 8.5 ㏈, flatness of 1.2 ㏈ p-p, input P1㏈ of 7㏈m, IIP3 of 15.42 ㏈m with nominal LO power level of 10㏈m. The return loss of RF and LO port are less than - 15 ㏈ and - 12 ㏈, respectively and IF port is less than - 6 ㏈. LO/RF and LO/IF isolation are 18 ㏈ and 50 ㏈, respectively. This approach would be a helpful reference for designing up/down converter possessing a filtering element.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.548-551
• /
• 2008

Recently, general user is making a lots of contents but it's difficult what using professional video editing system. and also video editing system is consist of effect of contents so user can't make a video contents easily. Therefore, we construct a system and make a application that user can make a video oneself using each sample video elements in this paper. For the this one, we used the semantic property about each element and we also construct to story, the story is matching to low level data in video.