• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.21-26
• /
• 2010

The most important feature of the one-cycle control method is its excellent ability in line disturbance rejection. However, when it is used as a controller in dc-dc converters, it has an undesirable transient response. The voltage overshoot at the transient time, which usually exists in one-cycle controlled converters, is unwanted in many applications and it is sometimes hazardous. In this paper, it is shown that the combination of a one-cycle controller with a current mode controller, can improve the transient response and consequently the overshoot can be controlled. Therefore, the combined controller has the excellent line disturbance rejection of a one-cycle controller and the output current limiting capability of current mode controllers. Because in this scheme a one-cycle controller is the master controller, the problem of instability of current mode control, will not happen. By simulation and a practical prototype, the capability of the method is shown.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.412-415
• /
• 1999

In this paper, we describe an implementation of the B-Link bus interface logic for a directory controller and a remote access cash controller in the SCI-based CC-NUMA multimedia server developed by ETRI . The CC-NUMA multimedia server is composed of a number of Pentium III SHV nodes and a SCI interconnection network. To communicate with remote nodes, each node has a CC-Agent which consists of a processor bus interface(PIF). a directory controller(DC), a remote access cash controller(RC), and two SCI 1ink controllers(LCs). The B-Link bus interface logic is developed for a directory controller and a remote access cash controller in order to communicate with a SCI link controller on a B-Link bus. It consists of a sending master controller a receiving slave controller, and asynchronous data buffers. And It performs a self-arbitration, a data packet transmission, a queue allocation, an early terminal ion. and a cut-through data path.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.336-341
• /
• 2004

In this paper, a hybrid stabilization approach involving both passivity observer/passivity controller and wave variables is addressed to stabilize a teleoperation system with fixed time delay. To guarantee the stability of master or slave side, passivity observer/passivity controller are applied. But, passivity observer/passivity controller cannot deal with communication delay, and thus even small communication delay cause the system to be unstable. To cope with this problem, wave variables are additionally employed to have robustness to fixed communication delays. To show the validity of our proposed approach, several computer simulation results are illustrated.

• 한국산학기술학회논문지
• /
• 제12권8호
• /
• pp.3603-3609
• /
• 2011

본 논문에서는 CAN(Controller Area Network) 통신을 이용한 균등한 전류 분배를 위한 새로운 부하분담(Load-sharing) 알고리즘(Algorithm)을 제안한다. 기존 아날로그 방식과는 달리 디지털 통신을 이용한 강인한 부하분담특성을 가지며, 모듈마다 독립된 제어기(전압제어기, 전류제어기)가 구성되어 있으며, 마스터(Master)의 지령치 모듈의 지령치에 따라 슬레이브(slave)모듈이 부하분담을 수행한다. 또한 각 모듈 상태를 파악하기 위해 별도의 제어선을 사용하여 모듈의 고장 상태 및 고장난 모듈의 위치를 정확히 파악함으로써, 효율적이고 고속의 부하분담을 구현하였다. 제작된 병렬 시스템은 각 모듈마다 독립된 제어기가 구성되어 있으며, 본 논문에서는 PSIM을 통한 시뮬레이션과 시작품 제작을 통해 제안된 알고리즘의 타당성을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1512-1515
• /
• 1997

One of the advantages of master-slave teleoperation is scaling concept such as position scaling, force scaling Meanuhile, lots of quantization effects are generated from position and force sensors in the master and slave manipulator. In this paper, to show the output error caused by the quantizaion effects from the position sensor and position scaling factor, simulation is done for free motion without contact in slave side. Transfer functiion model in which the quantization effect is assumed to be a disturbance input to the system is derived. Model shows that Jacobian, scaling factors, and controller affect the output by quantization effects form esnsors. One dof master and slave are used for simulation. In our study, the higher sensor resolution decreases the output error form quantization. Scaling factors can amplify the quantizatiion effects form the sensors in master and slave manipulators.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.290-294
• /
• 1995

In master-slave teleoperation system, time delay may be a critical problem because a task is performed over a distance. Even if the system is stable without time delay, time delay can make the system unstable. In this paper a new control scheme applicable to the system with time delay would be proposed,which is based on the conventional position-position feedback type controller. The stability of this control system is proved using scattering theory, and is compared with the conventional ones. By performing the simulation of a one-d.o.f master-slave system, the validity of the proposed algorithm is verified.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.88-95
• /
• 2007

TCN(Train Communication Network) adopts the master/slave protocol to implement real-time communication. In this network, a fault on the master node, cased by either hardware or software failure, makes the entire communication impossible over TCN. To reduce fault detection and recovery time, this paper propose the contention based mastership transfer algorithm. Slave nodes detect the fault of master node and search next master node using the proposed algorithm. This paper also shows the implementation results of a SoC-based Fault-Tolerant MVB Controller(FT-MVBC) which includes the fault-detect-logic as well as the MVB network logic to verify this algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.95-97
• /
• 2005

This paper deals with the implementation of walking for a humanoid robot by ZMP measurement using wireless sensor network. ZMP is measured by FSR sensors which are mounted at each corner of a sole. The wireless sensor network collects the sensor data according and exchanges robot information between host PC and a robot system. The master controller mounted on robot body receives trajectory data from the host PC via sensor network and drives the joint motor based on trajectory data. The time scheduler of the master controller controls the events at the ratio of 100ms. With this configuration, the walking of the humanoid robot KHR-1 could be realized successfully.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.594-597
• /
• 1995

A hand controller in teleoperation is a man-machine interface device that provides real-time interaction between a human operator at control site and a slave manipulator at remote site. In this paper, we examine the design issure related to various types of hand controllers in use. Emphasis is placed on bilateral hand controllers and their design parameters. We describe the design of a new 6 degree-of-freedom universal force-reflecting hand controller to control a remote Schilling Titan manipulator. This hand controller allows the operstor to maintain spatial corresponence in remote manipulative operation and fell a sense of contact with the environment. Finally, we demonstrate the graphic simulation of the hand controller to verify its design characteristics.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.48-48
• /
• 2000

We developed a wireless communication system for multiple instrumentation system. The developed system has a function of remote instrumentation and PLC(Programmable Logic Controller) control. The system consists of CC(Control and Communication) protocol, wireless media access and physical media system. For multiple wireless communication, we propose a hub polling protocol based on master-slave control concept. To show the validity of the developed system, several experiments are illustrated.