• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.788-794
• /
• 2002

To improve surgical result of total hip arthroplasty (THA), there has been some approaches using a robotic milling system, which can make a precise cavity in the femur. Usually, to carve a femur, the surgical robot is controlled by a pre-programmed tool-path regardless of a surgeon's experience and Judgment. This paper presents a control method of a surgical robot for THA, which can be used as an advanced surgical tool. With a master/slave combined surgical robot, surgeon can directly control the motion and velocity of a surgical robot. The master/slave-combined robot is controlled to display a specific admittance for a surgeon's force to the surgical robot velocity. To prevent the over-carving of a femur, virtual hard wall is displayed on the surgical boundary. To evaluate the proposed control method of the master/slave-combined surgical robot, 2-DOF master/slave-combined manipulator is used in experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.171.3-171
• /
• 2001

The master/slave-combined system has a simplified and miniaturized structure formed by combining the master and slave that are the teleoperation system. In a certain situation, the operator may want to feel the magnified/reduced admittance of the real environments. Or he may want to feel the specific predefined admittance of the virtual environments. This paper presents a force feedback control structure for the master/slave-combined system. Through the proposed control structure, the operator can feel the predefined admittance of the virtual environments in case of free motion, and the magnified/reduced admittance of real environments in case of contact situation. It is discussed how the elements of the admittance effect ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.540-540
• /
• 2000

This paper explores design and control methods of a surgical robot for total hip replacement surgery which can be easily maneuvered by a surgeon Like an advanced surgical tool. The 3-DOF in-parallel surgical robot is fixed directly onto patient's femur by the bone clamp during surgery. With the master/slave combined surgical robot, the surgeon can directly control the motion of the surgical robot with surgeon's experience and judgment during operation. For the easiness of operation, the master/slave combined robot is controlled using admittance control paradigm. And for the precise operation, the robot motion is restricted at the surgical boundary using virtual hard wall display.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.84-84
• /
• 2000

This paper proposes a new impedance control scheme based on a variable stiffness matrix for a bilateraL teleoperation. In this scheme, stiffness matrix of the impedance model in the slave is modulated based on the distance, measured by an ultrasonic sensor, between the slave and environment. At the same time, the stiffness matrix of the master is also changed accordingly in order for the impedance parameters of the combined system to remain constant The proposed scheme is implemented on a 1-dof master/slave system to perform a simple task. In the experiments, the teleoperator with the impedance parameter modulation shows better performance than one with fixed impedance parameters, especially in reducing task execution time and in avoiding excessive external forces.

• 센서학회지
• /
• 제19권3호
• /
• pp.184-190
• /
• 2010

In this paper, a remote submersion warning system based on multi-mode optical fiber(MMF) sensors and a wireless sensor network(WSN) are proposed. To improve the reliability and stability of the sensors, the dual optical fiber sensors combined to the optical coupler are demonstrated. A slave zigbee as a wireless sensor module was used as a platform to monitor and record the signal from the MMF sensors and then transmits these information to a master zigbee wirelessly. The monitoring system running the $LabVIEW^{(R)}$ software was connected to the internet to support the short message service(SMS) through extensible markup language(XML) web service. No matter where the managers are, they can always receive the real-time remote-monitoring data for safety check.

• 소성∙가공
• /
• 제12권1호
• /
• pp.34-42
• /
• 2003

This paper presents a rigid-plastic finite element method to handle the frictional contact problem between two deformable bodies experiencing large deformation. The variational formulation combined with incremental quasi-static model is employed for treating the contact boundary condition. The frictional behavior of the model obeys Coulomb's law of friction. The proposed contact algorithms are classified into two categories, one for searching contacting nodes and the other for calculating contact forces at the contact surface. A slave node and master contact segment are defined using the geometric condition of finite elements on the contact interface. The penalty parameter is used to limit the penetration between contacting bodies, and the finite elements are coupled with contact boundary elements.us gates and cavity thicknesses. Through this study we have observed that the jetting is related to the die swell of material. This means that the jotting is strongly affected by the elastic flow property rather than the viscous flow property in viscoelastic characteristics of molten polymer. Different resins have different elastic properties, and elastic flow behavior depends on the shear rate of flow, i.e. injection speed. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mole design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting regardless of amount of elasticity of polymer melt.

• 터널과지하공간
• /
• 제29권6호
• /
• pp.468-479
• /
• 2019

최근 대두되고 있는 지하공간 활용의 필요성 증대에 따라 지하공간의 안정적인 활용을 위해서는 수리-역학적 복합거동에 대한 이해가 필수적이다. 본 연구에서는 향후 국내 다양한 현장 및 지중 조건을 고려한 연구를 수행하는데 도구가 될 수 있는 수치해석을 위한 시뮬레이터를 개발하였다. 이를 위해 지중의 유체역학과 열역학, 역학을 해석하는 과학 소프트웨어 중 하나인 OpenGeoSys와 지반의 여러 역학적 문제들을 해석하는데 전문성을 지닌 FLAC3D를 연계하기로 하였다. 연동해석 기법에 대한 조사를 통해 OpenGeoSys를 주(master)로, FLAC3D를 종속(slave)으로 하여 연계 해석하는 파일 기반의 순차적 연계 방식으로 알고리즘을 개발하였다. 또한, 개발된 시뮬레이터의 검증을 위해 포화된 상태에서의 단상 유체 거동과 관련한 Terzaghi의 압밀 문제를 벤치마크 모델로 선정하여 비교 검증을 수행하였으며, 해석적 해와 수치해석의 결과가 잘 일치하는 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1405-1411
• /
• 2012

위험지역에서의 작업을 위하여 전세계적으로 원격조작기가 널리 활용되고 있다. 특히 원격 시스템의 경우, 운영되는 환경의 특징상 안정적인 성능이 담보되어야만 하며, 조작기 몸체의 경량화 및 운용환경 외부에서의 유지보수 편리성을 위하여 구동부를 시스템의 기저부에 집중시킬 수 있는 장력구동방식 메커니즘이 주로 활용되고 있다. 본 연구에서는 장력구동 방식 원격조작기에 적용하기 위한 그리퍼 탄성 구동부의 설계를 위해 시도된 접근법을 소개하고자 한다. 제시된 그리퍼 시스템은 기본적으로 스프링 메커니즘에 기반을 둔 4 절 링크형 구조를 가지고 있으며 마스터 조작자에 의해 동작되는 슬레이브 조작기의 말단부에 결합되는 구조를 가진다. 본 논문에서는 이러한 조작기의 요구사항에 맞는 그리퍼의 파지력 및 복원력을 재현하기 위하여 그리퍼 상에서의 적정 스프링 결합위치 및 요구강성과 그에 따른 운동학적 영향계수 등을 분석 및 고찰하였다. 최종적으로는 이러한 분석내용들을 바탕으로, 실제 그리퍼 시스템에 적용함으로써 타당성을 검증하였다.