• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3282-3292
• /
• 1996

Flow velocity was measured using a hot wire anemometer. Turbulence intensity was in proportion to mean flow velocity regardless of swirl velocity. And integral length scale has proportional relation with swirl velocity regardless of measurement position. Flame speed calculated by radius of visualized flame was increased and then decreased according to lapse of time from spark. Maximum flame speed was increased according to increase of turbulence intensity. Burning speed and flame transport effect increased with increase of swirl velocity, but ratio of burning speed to flame speed decreased with increased of swirl velocity. Mass fraction burned versus volume fraction burned was increased in proportion to the increase of turbulence intensity, caused by increase of combustion promotion effect according to increase of turbulence intensity and scale.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2005-2011
• /
• 2003

Introducing the interfacial pressure jump terms based on the surface tension into the momentum equations of two-phase two-fluid model, the system of governing equations is turned mathematically into the hyperbolic system. The eigenvalues of the equation system become always real representing the void wave and the pressure wave propagation speeds as shown in the previous manuscript. To solve the interfacial pressure jump terms with void fraction gradients implicitly, the conventional semi-implicit method should be modified as an intermediate iteration method for void fraction at fractional time step. This advanced semi-implicit method (ASIM) then becomes stable without conventional additive terms. As a consequence, including the interfacial pressure jump terms with the advanced semi-implicit method, the numerical solutions of typical two-phase problems can be more stable and sound than those calculated exclusively by using any other terms like virtual mass, or artificial viscosity.

• YAKHAK HOEJI
• /
• v.38 no.4
• /
• pp.469-475
• /
• 1994

As the continued studies for Korean cultivated rhubarb, MeOH extract of the leaves was fractionated with ether, ethylacetate, and n-butanol. From the ethyl acetate fraction of MeOH extract, one flavone glycoside, apigenin-8-${\beta}$-D-glucopyranoside(vitexin, $C_{21}H_{20}O_{10}$) and from the n-BuOH fraction of MeOH extract, two flavonol glycosids, kaempferol-3-O-(2,6-di-O-rhamnopyranosyl)-${\beta}$-D-galactopyranoside$(C_{33}H_{40}O_{19})$and quercetin-3-O-rutinoside(rutin, $C_{27}H_{30}O_{16}$) were isolated and identified through the physico-chemical properties and spectroscopic evidences(UV, IR, NMR, Mass) respectively.

• YAKHAK HOEJI
• /
• v.38 no.4
• /
• pp.410-417
• /
• 1994

As one of the studies for Korean cultivated Rhubarb, which has been used stomachic bitter, laxative and purgative, etc, MeOH extract of the leaves was fractionated with ether, ethylacetate. From the ether fraction of MeOH extract, two anthraquinone derivatives, 1,6,8-trihydroxy-3-methyl anthraquinone(emodin, $C_{15}H_{10}O_5$), 1,6,8-trihydroxy-3-hydroxymethyl anthraquinone (citrerosein, $C_{15}H_{10}O_6$) and from the ethyl acetate fraction of MeOH extract, one anthraquinone derivative, emodin-8-${\beta}$-D-glucopyranoside$(C_{21}H_{20}O_{10})$ were isolated and identified through the physico-chemical properties and spectroscopic evidences(UV, IR, NMR, Mass), respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.1
• /
• pp.47-53
• /
• 1999

Small compression-ignition direct injection engines have been developed as a measure to improve a fuel efficiency and reduce harmful exhaust gases. Those small engines generally employ high injection pressure increase on the spray impacting on a wall is discussed in this paper. The gas phase is modelled by the Eulerian continuum conservation equations of mass momentum energy and fuel vapour fraction. The liquid phases is modelled following the discrete droplet model approach in Lagrangian form and the droplet wall interaction is modelled as a func-tion of the velocity normal to impaction lands. The droplet distributions vapor fractions and gas flows are analyzed in various injection pres-sure cases. The penetrations of wall spray and vapor increase and the Sauter mean diameter decreases with increasing injection pressure.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.781-785
• /
• 2003

This work presents a numerical analysis of two-phase natural circulation flow in reactor cavity under external vessel cooling. Steady, incompressible, three-dimensional Reynolds-averaged Navier-Stokes equations for multiphase flows with zero equation turbulence model are solved to predict the shear key effect on the circulation rate of cooling water and the distribution of void fraction according to the different mass flow of inlet air. Results show that shear key has a positive effect on the circulation rate of cooling water and induce a local increase of void fraction below the shear key, but not remarkably.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.11-17
• /
• 2002

The first-order conditional moment closure (CMC) model is applied to $CH_4$/Air turbulent jet diffusion flames(Sandia Flame D, E and F). The flow and mixing fields are calculated by fast chemistry assumption and a beta function pdf for mixture fraction. Reacting scalar fields are calculated by elliptic CMC formulation. The results for Flame D show reasonable agreement with the measured conditional mean temperature and mass fractions of major species, although with discrepancy on the fuel rich side. The discrepancy tends to increase as the level of local extinction increases. Second-order CMC may be needed for better prediction of these near-extinction flames.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.179-179
• /
• 1998

We previously reported the hepato-protective effect of butanol soluble fraction of methanolic extract of Carthamus tinctorius L. Semen on carbon tetrachloride induced hepatotoxicity. In this study, the active component from the butanol soluble fraction was isolated by column chromatographic separation using Silica gel and Sephadex LH -20 and identified by spectroscopic methods such as Mass, $^1$H - NMR and $\^$13/C-NMR. The hepato-protective effect of the isolated active component on the CCl$_4$-induced liver damaged rats has been evaluated by performing blood chemical analysis and biotransformational enzyme analysis.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.4
• /
• pp.197-206
• /
• 2015

Recently the automobile engine has been developed in achieving the high performance, fuel economy, and emission reduction. In a conventional spark ignition engine the fuel and air are mixed together in the intake system, inducted through the intake valve into the cylinder, and then compressed. Under normal operating conditions, the combustion is initiated towards the end of the compression stroke at the spark plug by an electric discharge. Following inflammation, a flame develops and propagates through this premixed fuel-air mixture. Therefore the state of mixture is very important in the combustion and emission characteristics. In this study the combustion and emission characteristics were tested and analyzed with changing the mixture composition and engine operating parameters in order to improve the combustion and performance in engine.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.1
• /
• pp.25-29
• /
• 2003

The fluid flow, mass transfer, heat transfer and film thickness variation during the spin coating process are numerically studied. The model is said to be I-dimensional because radial variations in film thickness, concentration and temperature are ignored. The finite difference method is employed to solve the equations that are simplified using the similarity transformation. In early time, the film thinning is due to the radial convective outflow. However that slows during the first seconds of spinning so the film thinning due to evaporation of solvent becomes sole. The time varing film thickness is analyzed according to the wafer spin speed, the various solvent fraction in the coating liquid, and the various solvent vapor fraction in the bulk of the overlying gas during the spin coating is estimated.